Hickory Hardware self-close hinge provides a semi-concealed, face-mount solution for cabinet doors that need dependable self-closing action, so doors return to the cabinet face without manual nudging on everyday use. This Belwith Keeler hinge is part of the 20010 collection and keeps visual lines clean while still leaving a controlled reveal that suits traditional and utility cabinetry. The steel construction gives the hinge a solid feel under load, which supports repeated openings in busy kitchen, bath, or shop environments. A white finish lets the hinge blend into light-colored face frames and doors, which helps the hardware visually disappear on painted or melamine surfaces. As a variable overlay, face-mount hinge, it supports flexible overlay positioning on the frame, helping installers work with existing door sizes across similar cabinets. The self-close function supports consistent door alignment after use, which helps reduce callbacks for sagging or partially open doors.
This variable overlay face mount hinge installs directly onto the cabinet face frame and door surface, which avoids mortising operations and speeds up retrofit or new-build work. The 2-3/4 inch length or diameter dimension describes the overall hinge size, which helps with layout when spacing multiple hinges along a taller door. A projection of 13/16 inch indicates how far the hinge body extends when mounted, which affects the door swing path relative to neighboring doors or walls. The 2-3/16 inch width value defines the hinge footprint across the mounting surface, which matters when working near stiles or narrow rail sections. An offset of 3/8 inch positions the door edge in relation to the frame, which supports predictable reveals and alignment across a bank of cabinets. The screw size specification of 8-32 x 1 inch identifies the fastener thread and length used with this hinge, which affects pilot hole sizing and bite into the frame material.
This semi-concealed face mount hinge suits face-frame cabinets that benefit from a visible, traditional-style hinge while still keeping part of the hardware tucked against the frame. The self-close action supports cabinets in kitchens, baths, or shop spaces where doors are opened frequently and then allowed to return to the closed position under hinge tension. The white finish matches light cabinet colors used in many residential projects, which supports a consistent look across doors and frames without introducing contrasting metal tones. With a 2-3/16 inch width and 2-3/4 inch length or diameter, the hinge scales well on standard-size cabinet doors, which helps maintain proportional hardware spacing along stiles.
The 3/8 inch offset gives a clear reference for determining how the door overlays the face frame, which simplifies laying out consistent gaps from cabinet to cabinet during installation. The 13/16 inch projection value describes how far the hinge body stands off the mounting surface, which helps anticipate door swing clearance when cabinets run near walls, appliances, or adjacent doors. Steel construction helps the hinge resist twist as screws are tightened, which supports precise alignment without the leaf deforming under torque. The specified screw size of 8-32 x 1 inch pairs the hinge with a known fastener standard, which helps maintain a secure hold in common cabinet materials at typical door loads. Being part of the 20010 collection ties this hinge to a defined design family from Belwith Keeler, which supports visual consistency when the same hinge style is used across an entire project.
The P144-W is a semi-concealed, variable overlay, face mount hinge, so it mounts on the face frame while keeping part of the hardware hidden and allows flexible door overlay positioning.
The self-close feature on this hinge pulls the door shut as it nears the frame, which helps doors return to a closed position consistently after everyday use.
This Hickory Hardware hinge is made from steel, which provides a solid feel and supports repeated opening and closing in normal cabinet applications.
The 3/8 inch offset indicates how the door sits relative to the face frame, which guides hinge placement for consistent overlays and reveals across multiple doors.
The white finish allows the hinge to blend with white or light-colored cabinets, which keeps the hardware from drawing attention on painted or melamine surfaces.
The P144-W hinge has a 2-3/4 inch length or diameter, 2-3/16 inch width, 13/16 inch projection, and 3/8 inch offset, which define its footprint and working geometry on cabinet doors.
The Hickory Hardware self-close hinge P144-W from Belwith Keeler offers a semi-concealed, variable overlay, face mount design in a white finish, which suits many painted cabinet projects. The steel construction, 3/8 inch offset, and defined dimensions support predictable alignment and swing behavior on face-frame cabinetry. By matching the 8-32 x 1 inch screw size and working with the stated projection and width, installers can plan hinge rows that deliver consistent reveals across a run of doors. For projects calling for a white, self-closing, semi-concealed face mount hinge in the 20010 collection, this model aligns directly with that requirement.