Hickory Hardware self-close hinge is a semi-concealed, variable overlay, face mount hinge that controls how a cabinet door sits on a face frame, which supports accurate alignment on new or existing casework. The steel construction creates a rigid connection between door and frame, which helps the hinge hold adjustment during repeated use on busy cabinets. The antique brass finish gives the hinge a specific visual character, which helps match cabinets to other antique brass components in the same room. The self-close function pulls the door shut at the end of travel, which helps the door rest against the face frame without needing constant manual repositioning. The semi-concealed design leaves only part of the hinge visible, which balances access to the screws with a cleaner cabinet appearance.
This hinge is a face mount design, so it fastens directly to the front of a face frame, which suits standard face-frame cabinetry layouts. The screw-on configuration uses mechanical fasteners for attachment, which allows the installer to position the hinge precisely on the door and frame. The specified screw size of 8-32 x 1 inch defines the thread and length used with the hinge, which guides drilling and pilot hole preparation on wood cabinet components. The 13/16 inch projection states how far the hinge assembly extends from the mounting surface, which influences door clearance relative to adjacent cabinets, walls, or trim.
This hinge belongs to the semi-concealed hinges product class, which suits applications where part of the hardware remains accessible for adjustments while the rest stays out of view. As a variable overlay hinge, it works on face-frame cabinets where the door overlaps the frame instead of sitting flush within an opening, which matches many residential and light commercial layouts. The face mount configuration ties directly into the face frame, which fits common framed boxes without needing a cup bore in the door. The 3/8 inch offset defines a predictable relationship between frame and door, which supports consistent reveals when multiple doors are hung in a run.
The steel material gives the hinge a solid structural base, which helps the leaves and knuckle maintain alignment under the repeated cycles typical of cabinet doors. The 13/16 inch projection keeps the hinge profile relatively compact, which helps prevent interference between neighboring doors when they swing past each other. The antique brass finish identifies the visible surface treatment, which allows the hinge to tie into other antique brass hardware used on the same project or in adjoining rooms. The Hickory Hardware naming and Belwith Keeler brand association identify the manufacturer family, which helps match this hinge with other pieces in the same style line during cabinet upgrades or repairs.
The self-close function is integrated into the hinge mechanism, which draws the door into the closed position at the end of travel and promotes a consistent resting point against the face frame. The variable overlay capability lets the hinge support different door overlays on the same frame style, which is useful when aligning doors across slightly uneven cabinet runs. The face mount style gives a clear visual reference for screw placement on both frame and door, which supports repeatable hinge spacing from unit to unit.
The 2-3/4 inch overall length and 2-3/16 inch width establish a known hinge footprint, which helps layout when replacing existing hardware of similar size. The 3/8 inch offset sets the hinge geometry that governs how the door edge moves past the frame, which helps control binding and rubbing during the swing. The specified 8-32 x 1 inch screws work with the hinge leaves as designed, which helps the leaves seat correctly against wood cabinet components. The antique brass finish is applied to the hinge surfaces, which lets finished cabinets present a coordinated antique brass appearance across hinges and other decorative elements.
The hinge is a face mount, semi-concealed design for face-frame cabinets, which matches framed construction where hardware mounts to the front frame.
The hinge self-close function pulls the door into the closed position near the end of travel, which helps the door rest against the face frame consistently.
The hinge is variable overlay, so it can support different amounts of door overlap on the face frame, which helps align doors across varying cabinet conditions.
The hinge has a 3/8 inch offset that defines its geometry, which affects how the door clears the frame and how the reveal looks when closed.
The hinge measures 2-3/4 inches in length or diameter and 2-3/16 inches in width, which sets the mounting footprint on the door and frame.
The hinge is made from steel with an antique brass finish, which provides a solid metal structure with an antique brass appearance on exposed surfaces.
The Hickory Hardware self-close hinge from Belwith Keeler provides a variable overlay, face mount solution in steel with an antique brass finish, which aligns with framed cabinet projects needing semi-concealed hardware. The defined 3/8 inch offset, 2-3/4 inch length, 2-3/16 inch width, and 13/16 inch projection give clear working dimensions, which support consistent results on new installations and hardware changes. For projects calling for a semi-concealed, antique brass, self-close hinge, this P144-AB model can be matched to the job requirements and visual goals.