Hickory Hardware self-close 1/4 overlay double demountable hinge describes a semi-concealed hinge that controls a 1/4 inch overlay on a face-frame style cabinet door, so you can hit a known reveal without guesswork. The self-close function means the hinge pulls the door shut at the end of travel, which helps doors seat consistently and stay closed on everyday kitchen and shop cabinets. The double demountable design indicates a hinge built to engage demountable cuts in both the door and the face frame, so the door can be removed from the opening without disturbing the main mounting pattern. As a semi-concealed hinge in antique brass, the visible portions present a traditional hardware look while much of the working mechanism sits out of sight, which suits jobs where the hinge detail should support, not dominate, the cabinet design.
The stated 1-1/2 inch length defines a key hinge dimension installers can reference when laying out mortises or demountable slots in the door, so the hinge body lands where the manufacturer intended. The 2-1/4 inch projection gives the distance the hinge extends from its mounting reference, helping you understand how far the door will stand off when opened relative to the hinge pivot. The 1-5/16 inch width dimension describes the hinge width at its widest point, which is important when you are working between tight stiles or fitting near interior dividers. With these fixed dimensions called out, you can read the opening, overlay target, and frame widths, then select this hinge where those numbers align with standard 1/4 inch overlay cabinet layouts.
This self-close 1/4 inch overlay double demountable hinge is built for cabinet doors that are designed to cover the face frame by 1/4 inch, so it suits face-frame cabinets laid out to that common overlay standard. As a semi-concealed hinge, it works in projects where you want a mostly hidden hinge but still value a controlled, traditional-looking hinge line at the door edge, using the antique brass finish to coordinate with matching pulls and knobs. The double demountable configuration points to a hinge intended for doors and frames machined for demountable engagement, which is useful in shops that cut consistent slots or mortises in both parts so doors can be removed later without pulling the main hinge screws from the cabinet. In a bank of cabinets using the same overlay and hinge style, these consistent dimensions support repeatable door spacing from cabinet to cabinet.
The specified overlay of 1/4 inch, combined with the 1-1/2 inch length, gives you fixed reference numbers to drive jig settings or drilling patterns, which helps keep hinge positions consistent across multiple doors in a job. The 2-1/4 inch projection value helps you anticipate how the door will swing relative to adjacent cabinets and walls, reducing surprises when doors open near corners or appliances. With a width of 1-5/16 inches, the hinge brings a predictable footprint onto the frame edge, so you can plan hinge spacing on narrow rails or near interior partitions. The steel construction under the antique brass finish creates a hinge that pairs a defined visual style with a robust metal body, giving fabricators and installers a repeatable hinge choice when specifying semi-concealed demountable hardware in an antique brass cabinet program.
The hinge overlay of 1/4 inch suits doors planned to cover the face frame by that amount, supporting standard 1/4 inch overlay face-frame cabinet layouts.
The self-close feature draws the door shut at the end of swing, helping doors stay fully closed and line up consistently along cabinet runs.
The double demountable design indicates engagement in both door and face frame, so the door can be removed from the opening without shifting the mounted hinge pattern.
The antique brass finish provides a warm traditional tone on the semi-concealed hinge, helping coordinate with matching antique brass pulls and knobs on the same project.
The 1-1/2 inch length and 1-5/16 inch width define the hinge footprint, guiding mortise placement and spacing on face frames and doors for consistent hinge positioning.
The 2-1/4 inch projection indicates how far the hinge and door extend from the mounting reference, helping plan clearances near adjacent cabinets and walls.
The Hickory Hardware self-close 1/4 overlay double demountable hinge in antique brass ties together overlay control, self-closing action, and a traditional semi-concealed look, so it aligns well with 1/4 inch overlay face-frame cabinet programs. With defined dimensions for length, projection, and width, along with steel construction and an antique brass finish, this P5311-AB hinge from Belwith Keeler gives installers and shops a clearly specified option when choosing semi-concealed demountable hardware for coordinated cabinet runs.
Sold In: 1 Pair