Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware self-close 1/4 overlay hinge defines this Belwith Keeler semi-concealed, double demountable hinge, so you get a face-frame hinge that closes the door for you and helps doors return consistently to the same position. The 1/4 inch overlay specification sets how far the cabinet door covers the frame, which helps installers match existing reveals on partial-overlay face-frame cabinets. Being a double demountable hinge means it is designed to demount from both the door and the frame, which supports easier door removal during finishing or later adjustments. The semi-concealed hinge class keeps part of the hardware visible while most of the mechanism sits out of sight, which suits traditional and transitional cabinet styles. Brand identification as Belwith Keeler with the Hickory Hardware name ties this hinge to a recognized cabinet hardware line, which matters when matching other hinges in the same project.
The 1/4 inch overlay rating defines the relationship between the door edge and the face frame front, which allows installers to align replacement or new doors so they cover a quarter inch of the frame for each side. As a semi-concealed face-frame hinge, it is intended for cabinets with a face frame, which directs installers to mount on the frame stile rather than inside a frameless box. The double demountable design is specified, which means the hinge can be disengaged from door and frame, helping tradespeople remove doors during spraying, sanding, or hinge-side adjustments without driving out hinge pins. The projection at 2-1/4 inches and width at 1-5/16 inches give layout cues, which matter when placing multiple hinges vertically so screw lines appear straight and motion remains smooth.
This hinge is identified as a semi-concealed face-frame demountable hinge, which positions it for use on cabinets built with a face frame where part of the hardware is meant to remain visible on the frame edge. The 1/4 inch overlay specification points it at partial-overlay cabinet doors, which are common in many kitchen, bath, and utility cabinet layouts that do not run full-overlay fronts. The satin nickel finish keeps the color in the satin nickel family, which pairs well with satin nickel pulls, knobs, and other matching hardware from Hickory Hardware on coordinated projects. With the product falling under the demountable hinges category, it supports applications where doors might need to be taken off the frame during finishing, renovation touchups, or hardware upgrades without fully uninstalling the hinge leaves. The hinge is part of the semi-concealed hinges product class, which aligns it with jobs that blend some exposed hinge tradition with a cleaner profile than fully surface-mounted alternatives.
The stated 1/4 inch overlay value gives installers a clear target when setting door size and placement, which helps repeat the same reveal from cabinet to cabinet and cut down on variation along a bank of doors. The 2-1/4 inch projection measurement tells how far the hinge carries the door out from the frame, which helps plan door spacing next to walls, appliances, or adjacent doors so swing paths remain unobstructed. The 1-5/16 inch width dimension guides where the hinge will sit on the frame stile, which allows consistent setback and alignment across multiple hinges on a tall door, leading to smoother open and close action. Construction in steel provides a metal substrate, which supports repeated opening and closing cycles in normal cabinet use without relying on lighter materials. The satin nickel finish described for this hinge shapes the visible surface, which keeps finish tone uniform across doors when multiple hinges are used on the same installation. Classification as double demountable gives this hinge its removable character, which supports fast removal and reinstallation of the door, saving time on finishing steps and later jobsite adjustments compared with non-demountable designs.
The Hickory Hardware self-close 1/4 overlay hinge is listed as a semi-concealed face-frame demountable hinge, so it is intended for use on cabinets that have a face frame construction.
The 1/4 inch overlay rating means the cabinet door is sized and positioned to cover a quarter inch of the face frame, which guides door sizing and hinge placement across multiple openings.
The double demountable cabinet hinge design allows the hinge connection at both door and frame to be disengaged, which simplifies removing doors during finishing or alignment work.
The satin nickel finish defines the hinge color and sheen, which helps match other satin nickel cabinet hardware so the visible hinge portions coordinate with pulls and knobs.
The 2-1/4 inch projection and 1-5/16 inch width values indicate how far the hinge extends and how wide it sits, which aids in laying out stiles, clearances, and hinge spacing.
The self-close feature built into this hinge pulls the door shut as it nears the frame, which helps doors stay closed without relying solely on catches or exact user pressure.
The Hickory Hardware self-close 1/4 overlay hinge, identified as Belwith Keeler part P5311-SN, offers a semi-concealed, double demountable option for face-frame cabinets needing a 1/4 inch overlay. With steel construction, satin nickel finish, and defined projection and width, it supports consistent layout on multi-door runs. For projects built around satin nickel hardware and partial-overlay doors, this hinge aligns the overlay requirement, finish match, and demountable function in one part that fits typical cabinet workflows.