Hickory Hardware self-close 3/8 inset hinge describes a semi-concealed, double demountable hinge designed for 3/8 inch inset cabinet doors, so it supports traditional face-frame layouts where the door overlays the frame edge by that measured offset. The self-close function identified in the product name means the hinge pulls the door shut at the end of its travel, which helps doors settle consistently without needing a separate catch on many cabinet runs. Being a double demountable hinge called out for this configuration means it is built to engage both the door and the frame in a demountable style, so the door can be removed from the face frame without dismantling the entire hinge mounting. The product is classified as a semi-concealed hinge, so part of the hinge shows on the cabinet exterior while the rest sits inside, which suits installations where some traditional hardware detail is acceptable while keeping most of the mechanism out of sight.
The hinge is categorized under semi-concealed face-frame demountable hinges, so it is intended for use on face-frame cabinetry where the frame sits proud of the cabinet box and the hardware mounts between frame and door. The 3/8 inch offset noted in the description sets the relationship between door and frame, so doors can be positioned with that consistent inset while still closing properly against the face frame. The black iron finish called out for this hinge means the exposed portions visually link with other dark hardware on the project, which simplifies finish coordination during layout. With a projection of 2-5/16 inches combined with a width of 1-3/8 inches, the hinge body dimensions help plan mounting positions that balance door swing with clearance around nearby fronts or moldings.
The product is specified as a 3/8 inch inset double demountable hinge, so it is suited to doors that partially overlay a face frame while still stepping back that 3/8 inch from the front, a common layout on traditional framed cabinets. Being double demountable means both the frame side and the door side use demountable connections, so doors can be taken off the cabinet by working at the hinge area instead of removing full sets of fasteners from the wood. This semi-concealed hinge classification places it within semi-concealed face-frame hinges, so part of the hardware shows along the edge, giving a defined hinge line that works on kitchens, baths, or utility cabinets where visible hinge knuckles are acceptable. The steel construction noted for the material provides a metal structure that stands up to repeated openings in these applications, supporting daily cabinet use without rapidly wearing the moving joint. The black iron finish described in the web description offers a dark, textured look that can complement rustic, industrial, or simply dark-painted door styles, tying the hinge appearance into the broader cabinet hardware scheme.
The 3/8 inch offset dimension directly described for this hinge provides a clear target when laying out door reveals, so installers can align multiple doors along a run with a consistent inset from the face frame. The projection measurement of 2-5/16 inches clarifies how far the hinge carries the door out from its mounting surface, which matters when planning gaps between neighboring doors or obstacles so that the self-close motion can complete without interference. The width of 1-3/8 inches and length or diameter of 1-13/16 inches define the footprint of the hinge body, giving enough information to position hinges uniformly up and down the stile to support the door evenly. The self-close action identified by the product name helps pull doors tight at the end of travel, which can reduce minor misalignment from casual closing and keep door lines looking more even across the cabinet run. The manufacturer part number P5312-BI and the brand name Belwith Keeler link this hinge to a specific Hickory Hardware self-close 3/8 inch inset design, aiding repeat ordering on multi-phase projects or future service work that needs the same motion and appearance.
The hinge is described with a 3/8 inch offset and as semi-concealed face-frame hardware, so it suits framed cabinets using a 3/8 inch inset door relationship to the face frame.
The product name specifies self-close, so the hinge pulls the door shut at the end of travel, helping doors settle into a consistent closed position in everyday use.
The hinge is identified as double demountable, meaning both sides use demountable engagement, allowing doors to be removed at the hinge area during cabinet work.
The finish is listed as black iron, giving the visible hinge areas a dark, forged-style look that coordinates with similarly finished cabinet pulls or knobs.
The projection of 2-5/16 inches and width of 1-3/8 inches define how far the hinge extends and how much surface it covers, helping plan clearances and spacing.
The manufacturer part number P5312-BI uniquely identifies this Hickory Hardware self-close 3/8 inch inset double demountable hinge for matching future purchases.
The combination of 3/8 inch offset, double demountable design, and semi-concealed face-frame classification defines this hinge as a focused option for framed cabinet work using inset overlay doors. The steel construction and black iron finish described in the product data pair structural metal strength with a dark visual style that coordinates with many knob and pull finishes from the same design family. With published dimensions of 2-5/16 inch projection, 1-3/8 inch width, and 1-13/16 inch length or diameter, the hinge offers clear layout values for planning door spacing and hinge placement on stiles and rails. For projects that need a repeatable Hickory Hardware self-close 3/8 inset hinge solution from Belwith Keeler, this P5312-BI model from Wurth Baer Supply provides a defined specification that can be applied across multiple cabinets or job sites.
Sold In: 1 Pair