Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bed storage lift mechanism gas spring assisted 60 inch describes a gas spring assisted bed hardware set designed to raise a bed platform for access to storage space. The mechanism uses twin gas pistons, so the lift action is supported rather than relying only on manual force, which helps when handling the weight of a platform, mattress, and bedding. The target weight rating is 231 lb per pair, referring to the combined weight of platform, mattress, and bedding for best operation, so installers can size the structure and materials around a clear operating range. The 60 inch length supports larger bed platforms, creating an extended lifting arc that suits typical bed dimensions. The hardware is classified as bed hardware under builders hardware, which keeps it aligned with standard woodworking and furniture construction workflows.
The gas spring assisted mechanisms can be oriented to open from the side or end of the bed, giving layout flexibility when planning room access and storage reach. Each mechanism is supplied as a fully assembled one-piece unit, so installers mount a single integrated component per side instead of building up multiple separate elements, which streamlines layout and fastening steps. The design is intended for use without a box spring, which means the lift works directly with a platform that supports the mattress. The target weight guidance is based on the total platform, mattress, and bedding weight, so installers can plan structure and frame sizing around realistic in-use loads.
This gas spring assisted mechanism is used in bed projects where under-bed storage access is needed without removing the mattress. The 60 inch long format suits bed frames built with substantial side lengths, so it can run along a large portion of the platform edge. Since it is classified as bed hardware within builders hardware, it fits into projects handled by woodworking shops, furniture makers, and builders working on custom or production beds. The mechanism is designed to function with a platform-style bed that does not use a box spring, so the lift acts directly on the platform structure carrying the mattress.
The system is intended to work with a 6 to 10 inch thick standard innerspring or foam mattress, so the gas spring forces and motion are tuned around that thickness range. Because the target operating weight is 231 lb for platform, mattress, and bedding combined, the hardware is aimed at typical residential bed builds where that combined weight is common. The orientation flexibility side or end opening allows the same hardware to serve beds installed against walls, in alcoves, or as stand-alone pieces, supporting different room layouts while using a single mechanism type.
The twin gas pistons provide lift assistance and controlled motion, so the person using the bed can raise the platform with less effort, which is important when the bed structure carries up to the 231 lb target weight. The fact that each lift mechanism is fully assembled into a one-piece unit means installers handle a defined assembly, which simplifies measuring, marking, and securing it to the bed frame components. The recommended material for the bed frame is 3/4 inch hardwood plywood or 4/4 hardwood lumber, so the lift loads are transferred into stock thicknesses commonly used in cabinet and furniture construction.
The design expectation that the bed uses a 6 to 10 inch standard innerspring or foam mattress keeps the operating geometry predictable, so hinge points and lift angles correspond to typical mattress heights used in many projects. Because the mechanism can open from the side or end of the bed, the same part number X22402S serves multiple design configurations, letting shops standardize on one lift hardware choice across different bed orientations. The clear linkage between target weight, recommended frame materials, and mattress thickness allows builders to coordinate structural design, material selection, and lift behavior for repeatable performance.
The X22402S bed storage lift mechanism is intended for platform-style beds used without a box spring, so the gas spring system lifts the structural platform that supports the mattress.
The 231 lb target weight covers the combined weight of the platform, mattress, and bedding, which guides builders in designing bed structures that match the lift performance.
The gas spring assisted mechanisms can be oriented to open from the side of the bed, which suits room layouts where side access to under-bed storage is preferred.
The same gas spring assisted mechanisms can be oriented to open from the end of the bed, supporting designs where foot-end access to storage is more practical.
The bed lift hardware is designed to work with a 6 to 10 inch thick standard innerspring or foam mattress, which aligns the lift geometry with common mattress profiles.
The mechanism needs bed frame material equal or superior to 3/4 inch hardwood plywood or 4/4 hardwood lumber, so the lift loads transfer into suitably robust stock.
The gas spring assisted bed storage lift mechanism gas spring assisted 60 inch offers a defined 231 lb target weight and orientation flexibility, so it can support under-bed storage access in both side-opening and end-opening layouts. With twin gas pistons, a 60 inch length, and use with 6 to 10 inch mattresses on a platform without a box spring, the X22402S format aligns with many custom and production bed builds. For projects using 3/4 inch hardwood plywood or 4/4 hardwood lumber frames, this Selby Furniture Hardware bed hardware provides a structured approach to integrating lift function into the bed design.