Amerock self-close variable overlay hinge describes a semi-concealed face frame hinge designed to close the cabinet door without external catches, which helps streamline straightforward cabinet builds or replacements where a controlled door close is needed. The hinge is part of Amerock Corporation semi-concealed hinges, so it lets the door edge partially cover the face frame while leaving a predictable portion of the hinge visible, which helps installers work within traditional face-frame layouts. This hinge is face mount, meaning it attaches directly to the cabinet face frame, which simplifies layout on standard cabinet construction where a flat frame surface is available. The screw-on design lets you fasten the hinge using standard screw-driving tools, which matches typical shop and jobsite workflows. The satin nickel finish gives the visible portion of the hinge a muted metallic look, so it can align with many satin nickel pulls and knobs in a project.
This semi-concealed face mount hinge uses a screw-on attachment method, so it mounts to the face frame with screws through the hinge plates and ties directly into familiar screw-driving steps. The variable overlay description indicates that the hinge can accommodate different degrees of door overlap across the face frame, giving flexibility when aligning doors on cabinets that share similar frame widths but vary slightly in door sizing. With a length of 2-3/4 inches and a width of 1-3/4 inches, the hinge body occupies a modest footprint on the frame and door, which supports layouts where space between hinges is limited. The 11/16 inch projection describes how far the hinge extends outward, which is useful when considering clearances between adjacent doors or nearby surfaces.
This Amerock self-close variable overlay hinge is categorized under semi-concealed face-frame hinges, which aligns it with cabinet doors mounted on traditional face-frame cabinets rather than frameless boxes. The face mount design places the hinge leaf directly on the front surface of the frame, which suits installations where the frame stile provides the primary mounting surface. As a satin nickel face mount hinge, it visually coordinates with satin nickel cabinet hinge finishes throughout a project, helping maintain a consistent hardware appearance on exposed hinge edges. The semi-concealed style leaves part of the hinge visible when the door is closed, which can match existing cabinetry that already uses similar exposed hinge outlines. Because it is sold in pairs, each set addresses a single average-sized cabinet door, which is practical when counting hinges across a run of upper or base cabinets.
The Amerock Corporation designation and manufacturer part number BPR3429G10 give a precise product reference, which is important when repeating the same hinge across multiple jobs or matching a prior installation. The variable overlay feature gives flexibility when aligning overlays from cabinet to cabinet, so small differences in door sizing can still be matched visually along a run. The self-close action is built into the hinge function, so once the door reaches the closing zone the hinge moves it home, which helps deliver consistent closing behavior from one cabinet to the next. The 2-3/4 inch length and 1-3/4 inch width provide predictable hinge proportions, aiding template use or layout notes in a shop environment. An 11/16 inch projection figure supports planning for door swing paths where adjacent doors, walls, or decorative elements sit close to the hinge side, which helps limit interference during regular use.
The hinge is classified as a semi-concealed face-frame hinge, so it is intended for cabinet doors mounted on face-frame style cabinet constructions.
The variable overlay designation means the hinge can support different amounts of door overlap on the face frame, giving flexibility when aligning doors across similar cabinet openings.
The self-close description indicates the hinge draws the door into the closed position as it nears shut, helping the door settle closed without separate closing hardware.
The face mount design means the hinge fastens to the front of the cabinet face frame, so installers work directly on the frame surface rather than inside the cabinet side panel.
The 2-3/4 inch length and 1-3/4 inch width define the hinge footprint, which helps plan spacing between hinges and verify that the hinge suits the face-frame stile size.
The 11/16 inch projection describes how far the hinge extends, which helps assess clearances near adjacent doors, moldings, or walls in typical cabinet layouts.
The Amerock self-close variable overlay hinge pairs a face mount, screw-on design with semi-concealed styling, which suits many face-frame cabinet projects aiming for dependable function and a satin nickel look. The defined length, width, and 11/16 inch projection give clear dimensional boundaries for planning hinge locations along stiles and rails. The variable overlay and self-close descriptions support consistent appearance and closing behavior across multiple doors on a run. For projects matching satin nickel hardware and using semi-concealed face-frame hinges, this BPR3429G10 hinge provides a clearly specified option that aligns with common cabinet construction and layout practices.
Sold In: 1 Pair