Amerock self-close variable overlay hinge delivers a semi-concealed face frame solution that closes doors without a separate catch, which helps cabinets feel finished and controlled on every cycle. This hinge is designed as a face mount style, so it fastens directly to the cabinet face frame for straightforward layout when working on traditional framed construction. The screw-on configuration keeps installation predictable, because each leaf is secured using screws rather than press-in components. With a polished brass finish, the hinge presents a bright metal look that coordinates with polished brass knobs and pulls, helping the whole cabinet run match. As part of Amerock Corporation offerings, this hinge aligns with a recognized brand in cabinet hardware, which supports consistent use alongside other Amerock parts by part number in a project.
This hinge uses a screw-on method, so the leaves are fastened using screws through the hinge plates into the cabinet material, giving a solid mechanical joint that suits wood cabinet frames and doors. The hinge length is 2-3/4 inches, which defines the run of the leaf and affects where mounting holes fall along the stile. With a width of 1-3/4 inches, the hinge footprint across the frame sets how much flat surface is needed for proper seating. The 11/16 inch projection describes how far the hinge extends outward from the mounting surface, influencing door clearance and how the door edge stands off from the frame in the open position.
This Amerock semi-concealed face frame hinge fits projects that use framed cabinet construction and call for hardware mounted directly to the face frame. The hinge category is listed as Semi-Concealed Hinges and Face Mount Hinges, which ties it directly to cabinet jobs where some hardware appearance on the frame is appropriate. The variable overlay function suits situations where door overlays change from cabinet to cabinet, because one hinge style can be used while varying positioning on the frame. The polished brass finish makes this hinge a match for cabinets that already specify polished brass pulls and knobs, helping maintain a consistent run of bright brass hardware on face-framed doors.
The Amerock BPR34293 part number identifies a specific self-close variable overlay hinge, which helps installers reorder the exact same hinge when expanding or repairing cabinet runs. The self-close action means the hinge draws the door shut at the end of travel, which reduces the need for separate catches and helps doors sit closed against the frame. Because this hinge is a face mount design, hole placement references can be taken from the front edges of the frame, which supports repeatable positioning across multiple doors on a bank of cabinets. The 2-3/4 inch length and 1-3/4 inch width dimensions provide fixed geometry, so shop drawings and drilling patterns can be based on known sizes. The 11/16 inch projection figure informs how far the door will stand proud when swung, which matters when coordinating nearby doors or adjacent walls. As an Amerock Corporation hinge in a semi-concealed class, it fits into established hardware assortments where consistent part sourcing is important for long-term cabinet maintenance.
The Amerock self-close variable overlay hinge is described as a face frame hinge and face mount hinge, so it is suited to framed cabinets where hardware attaches to the cabinet face frame.
The hinge is classified as a semi-concealed hinge, so part of the hardware remains visible while the rest is hidden, giving a traditional hinge look while keeping some components out of sight.
The hinge is described as variable overlay, meaning the same hinge model can serve different overlay dimensions on face frame cabinets, which simplifies planning across mixed door overlays.
The hinge length is 2-3/4 inches and width is 1-3/4 inches, so these dimensions determine the mounting footprint and help set drilling references on cabinet frames and doors.
The projection is 11/16 inch, which indicates how far the hinge extends from the mounting surface and influences door clearance relative to adjacent surfaces when opened.
The hinge finish is polished brass, so it visually aligns with other polished brass cabinet hardware, helping installers keep a consistent metal tone across a full cabinet installation.
The Amerock self-close variable overlay semi-concealed face frame hinge, part number BPR34293, combines face mount installation, screw-on fastening, and polished brass finish for framed cabinet projects. The defined length, width, and projection give clear geometry for cabinet layout and door clearance planning. The variable overlay design suits mixed overlay conditions across a kitchen or built-in run, reducing the need to change hinge styles from cabinet to cabinet. For cabinet work using face frames and polished brass hardware, this hinge offers a consistent Amerock solution that supports repeatable installation patterns across pairs of doors.