Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 1/2 overlay hinge describes a semi-concealed, double demountable hinge designed for face-frame cabinets, so it supports typical overlay door layouts while keeping most of the hardware out of sight on finished jobs. The self-close function means the hinge pulls the 1/2 inch overlay door shut at the end of travel, which helps doors sit home consistently on active kitchens and shops. The double demountable design lets the hinge engage both door and frame, giving installers a way to remove doors from either side of the hinge connection during fitting or service. The screw-on configuration uses standard screw fastening, which fits common shop workflows when laying out and hanging multiple doors on a run of cabinets.
This Amerock double demountable hinge uses a screw-on installation, so fastening is done with screws through the hinge into the cabinet components. The specified 5/8 inch screw size establishes the intended screw length, which helps the hinge bite firmly into wood while respecting typical face-frame and door thicknesses. Because this hinge is classified as semi-concealed, only part of the hardware shows on the cabinet exterior, which supports cleaner lines on framed cabinet fronts while still giving access to the hinge during installation or adjustment. The demountable style connects to both the door and the frame, which allows repeated removal and reinstallation of doors during finishing, drilling, or hardware changes without disturbing the mounted hinge leaves.
This Amerock Corporation hinge is categorized as a demountable hinge within semi-concealed face-frame hinges, so it is suited to framed cabinet construction where a 1/2 inch overlay is required. The 1/2 inch overlay detail defines how far the cabinet door covers the face frame, which helps align stiles and rails across a bank of doors for a consistent look. With a 2-1/4 inch length or diameter and 1-1/2 inch width, the hinge scales well to common door sizes, which helps maintain proportion on standard kitchen and shop cabinetry. The 5/8 inch projection works with the overlay to position the door off the frame, which affects how doors clear adjacent fronts during swing. The sterling nickel finish provides a practical, neutral appearance wherever the semi-concealed parts of the hinge remain visible around the door edge or face frame. Since the material is steel, the hinge body offers a firm feel at the pivot, which supports repeated self-closing cycles in regular cabinet use.
The CMR8704G9 manufacturer part number specifies this exact Amerock self-close 1/2 overlay hinge, which helps shops standardize across projects and re-order the same hardware when expanding existing cabinet runs. The double demountable design lets the hinge interface with both door and frame in a removable way, which streamlines finishing and fitting work when doors must be taken off and put back on during the build. Because this hinge is semi-concealed, its geometry is set up so that most of the hardware sits out of view behind the door, which supports a cleaner finished appearance while leaving enough exposure for straightforward screw-on mounting. The 5/8 inch screw size pairs with the hinge geometry to hold it securely to wood components, which matters when doors are cycled frequently over time. The 5/8 inch projection and defined width work together to locate the pivot relative to the frame edge, which helps installers repeat their layout marks from door to door and reduce adjustments later.
The Amerock CMR8704G9 hinge is a semi-concealed, double demountable hinge for face-frame cabinets with a 1/2 inch overlay, so it fits framed layouts using that specific overlay.
The 1/2 inch overlay sets how much the door covers the face frame, which lets installers plan consistent reveals and align multiple doors on a run of cabinets.
The Amerock self-close function pulls the door shut at the end of its swing, which helps cabinet doors return to a closed position without relying only on user pressure.
The double demountable design lets the hinge connect to both door and frame in a removable way, which supports taking doors off during finishing or service without disturbing mounting.
The 2-1/4 inch length, 1-1/2 inch width, and 5/8 inch projection define the hinge footprint and stand-off, which influence clearances and layout marks on doors and face frames.
The specified 5/8 inch screw size matches the screw-on mounting style, which helps secure the steel hinge into typical cabinet materials while fitting its designed geometry.
This Amerock self-close 1/2 overlay hinge is sold by Wurth Baer Supply in full box quantities of 100 pairs, so it suits production runs or larger cabinet projects where consistent hardware is needed across many doors. The combination of steel construction, sterling nickel finish, self-close action, and double demountable configuration gives installers a defined set of characteristics to plan around when laying out framed cabinets with a 1/2 inch overlay. For projects built around this hinge specification and part number CMR8704G9, selecting the full box option supports uniform appearance and function from door to door across the job.
Sold In: 100 Pair