Amerock 3/8 Inset Double Demountable Hinge Purpose

Amerock self-close 3/8 inset double demountable hinge is a semi-concealed face-frame hinge that supports 3/8 inch inset doors, so existing face frames can keep a traditional reveal while gaining controlled closing. The semi-concealed design leaves part of the steel hinge visible, giving a clear visual reference point during layout and alignment on cabinet projects. The double demountable style is designed so both the door and frame sides use demountable connections, which helps during removal and reinstallation of doors in shop or onsite work. The self-close function built into this Amerock Corporation hinge draws the door shut at the end of travel, helping doors land consistently against the frame without manual pushing every time. The oil rubbed bronze finish provides a dark, warm appearance that coordinates with oil rubbed bronze hardware across the job.

Key Amerock Demountable Hinge Worksite Advantages

• The material: steel construction gives the hinge a solid base for repeated door movement, which supports consistent operation during everyday cabinet use.
• The 3/8 inch inset specification sets the door position relative to the face frame, helping layouts stay uniform across banks of doors on the same run.
• The self-close function inside the hinge controls the final part of the swing, which helps doors return fully to the cabinet and sit flush against the frame.
• The oil rubbed bronze finish provides a dark tone on the semi-concealed leaves, which lets the visible parts coordinate cleanly with oil rubbed bronze knobs and pulls.
• The 5/8 inch projection dimension defines how far the door moves out from the frame when opened, which matters when checking clearances between adjacent doors or nearby components.
• The 1-7/8 inch width measurement on the hinge body gives a known footprint for layout, which supports accurate boring, slotting, or mortising setups.

Installation Details For 3/8 Inset Demountable Hinge

The screw-on design of this Amerock self-close 3/8 inch inset double demountable hinge uses screws for fastening, giving a firm mechanical connection between hinge, door, and face frame during installation. The 5/8 inch screw size listed for this hinge provides a known fastener length, which helps match drilling depth and grip into typical cabinet materials. The 2-1/4 inch length or diameter dimension gives an overall size reference, helping installers position the hinge so it clears adjacent components while still supporting the door edge. As a semi-concealed hinge in the demountable hinge category, it is suited to face-frame cabinet construction where the frame and door edges work together for 3/8 inch inset reveals.

Using This Amerock Hinge On Cabinet Projects

Where This 3/8 Inset Hinge Is Applied

This Amerock Corporation self-close 3/8 inch inset double demountable hinge is specified for face-frame cabinets that call for 3/8 inch inset doors, so it fits projects following that standard reveal. As a semi-concealed hinge under the demountable hinges category, it leaves part of the hinge visible on the frame while the rest sits within the cabinet line, matching traditional semi-concealed styling. The oil rubbed bronze finish lets this hinge visually coordinate with oil rubbed bronze cabinet pulls and knobs on kitchen, bath, or built-in woodworking jobs. With a width of 1-7/8 inches and a length or diameter of 2-1/4 inches, the hinge body suits typical cabinet-scale door sizes where compact hardware is needed. The 5/8 inch projection noted for this hinge gives a defined swing path, so door clearance relative to nearby drawers, doors, or walls can be planned around that movement.

Why These Demountable Details Support Workflow

The double demountable hinge style lets both door and frame sides use demountable connections, which is useful when doors need to be taken off and put back on during finishing, transport, or jobsite adjustments. The self-close feature works continuously with every cycle, pulling doors closed during the last part of travel, which helps maintain a consistent shut position and reduces time spent tweaking how the door rests. Because this hinge is in the semi-concealed hinges product class, installers get a visible reference line along the frame that simplifies aligning multiple doors on long face frames. The screw-on installation with 5/8 inch screws supports a familiar workflow for cabinet shops and field crews, using standard drilling patterns and drivers. The Amerock CMR8700ORB designation ties the hinge to a specific manufacturer part number, which simplifies reordering the same hardware across multiple jobs or for future replacements.

Common Questions About Amerock CMR8700ORB Hinges

Selecting This Hinge For Cabinet Projects

The Amerock self-close 3/8 inset double demountable hinge in oil rubbed bronze pairs steel construction with a 3/8 inch inset specification, giving cabinet doors defined positioning on face frames. The semi-concealed, double demountable design supports traditional styling and straightforward door removal when work sequences call for finishing or transport between shop and site. With known dimensions such as 2-1/4 inch length or diameter, 1-7/8 inch width, and 5/8 inch projection, layout and clearance checks can be planned around real numbers rather than trial and error. Choosing the Amerock CMR8700ORB hinge with its self-close action and oil rubbed bronze finish helps align cabinet hardware appearance and function across the entire project run.