Amerock self-close variable overlay hinge gives a semi-concealed, face-mount solution that controls how a cabinet door covers the face frame, so you can match variable overlays across doors on a run. This semi-concealed hinge sits in the Semi-Concealed Hinges class and mounts directly to the face frame as a Face Mount Hinge, so the layout suits common face-frame cabinet construction. The hinge is made from steel, which provides a solid feel at the joint so doors track predictably through daily use. Its self-close function pulls the door shut at the end of travel, which helps doors sit against the frame without repeated manual adjustment. An Antique Brass finish defines the visible portions of the hinge, so the exposed edges read as a coordinated part of an antique brass hardware layout.
This Amerock Corporation hinge is identified as BPR7630AE, so installers can match it to documentation or existing hardware by part number when repeating a job or expanding a layout. The face mount configuration sets the hinge directly on the surface of the cabinet face frame, which means the 1-13/16 inch width becomes the key sizing reference when positioning the hinge along narrow stiles or rails. A projection of 5/8 inch defines the working offset of the door from the frame, which supports planning for interior pull clearance and how door edges interact with adjacent fronts. The variable overlay characteristic allows the same hinge type to serve different overlay amounts on a face frame, reducing the need to mix hinge models when overlay changes across a kitchen or bank of cabinets.
This hinge is categorized under Semi-Concealed Face-Frame Hinges and Face Mount Hinges, so it is aimed at cabinets built with face frames rather than frameless cases. Because it is a semi-concealed hinge, part of the hardware remains visible on the cabinet exterior, which suits projects where the Antique Brass finish is intended to be seen as part of the hardware style. The Antique Brass finish lets the visible hinge portions align with other antique brass components in the room, so knobs, pulls, and hinges can share a consistent look. As a self-close variable overlay face mount hinge, it suits cabinet doors that need an automatic pull toward the frame while also using variable overlays, such as mixed-width doors on different cabinet sections.
The 5/8 inch projection gives a defined stand-off dimension for the door, so installers can maintain consistent reveals between doors and nearby surfaces by working from that fixed figure. With a width of 1-13/16 inches, the hinge defines its own mounting footprint on the face frame, which helps lay out vertical spacing and edge distance so multiple doors line up in a straight visual line. The steel material provides a rigid structure at the pivot, which supports repeatable door movement where hinges are installed to the same reference lines. The variable overlay capability lets the hinge adjust to different overlay requirements while still using the same BPR7630AE part number, so replacement or future additions can reference that identifier to reproduce the same function on additional doors.
The Amerock BPR7630AE hinge is classified as a Semi-Concealed Face-Frame Hinge and Face Mount Hinge, so it is suited to cabinets that use a face-frame construction.
The variable overlay feature means the hinge can work with different door overlays on a face frame, allowing one hinge type across cabinets where overlay dimensions change.
The 5/8 inch projection is the distance the hinge holds the door off the frame during operation, which influences clearances to adjacent doors and interior components.
The 1-13/16 inch width defines the footprint of the hinge on the face frame, helping set edge distance, vertical spacing, and fit on narrow cabinet stiles or rails.
The Antique Brass finish determines the appearance of the visible hinge portions, allowing the hardware to coordinate with other antique brass components on the cabinet.
The self-close function on this hinge draws the door closed at the end of travel, helping the door rest against the frame in a consistent position after use.
The Amerock self-close variable overlay hinge in Antique Brass offers a steel, semi-concealed, face-mount option for face-frame cabinets, so it can support both functional closing and visible hardware styling. With variable overlay capability, 5/8 inch projection, and a 1-13/16 inch width, the same BPR7630AE hinge can be laid out across different doors while holding consistent reveals and a coordinated antique brass appearance. For projects built around face-frame construction that call for semi-concealed hardware, this hinge provides a defined set of working dimensions and a recognizable part number that aligns with Amerock Corporation cabinet hardware.