Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Vionaro H185 drawer inset front panel defines the visible face of a Grass Vionaro drawer, so the drawer front ties directly into the system. The H185 inset front panel design gives installers a dedicated component that matches the Grass Vionaro drawer construction system, simplifying layout when planning a run of drawers. The white front panel keeps color coordination aligned with matching Grass components, so drawer interiors and front framework work together visually on the finished job. The panel length of 45-11/16 inches provides a starting size that can be sized down within that range, supporting projects where a single part serves several drawer widths. The aluminum front panel profile creates a rigid front member for the drawer, so the load transfers through a stable profile rather than improvised framing. By using the specified Vionaro H185 inset panel, installers keep the drawer system within the design intent of the Grass Vionaro drawer system from Wurth Baer Supply.
The H185 inset front panel white design works as a dedicated Vionaro drawer front, so installers work to known dimensions rather than adapting generic stock. With a 13mm side width, the panel interfaces with drawer sides sized to that slimline dimension, keeping corner junctions visually tight. The ability to cut H185 inset front panels to length means a single length can be set up on a saw with a stop, speeding through repetitive drawer front sizes. One side of the panel is pre-drilled, so that side establishes hole pattern accuracy relative to the Vionaro hardware. A drilling template is provided for the other side, so mirrored holes can be produced accurately when preparing the opposite end. Together, the pre-drilled side and template-guided side support consistent hole placement across multiple panels on a job.
The Vionaro H185 drawer inset front panel, white, 45-11/16 inch length works within the Grass Vionaro drawer construction system, so it fits projects already planned around that platform. The color-coordinated aluminum front panel profile pairs with Grass drawer components, which suits cabinet lines where matching metal finishes matter inside the casework. The Cubist design with 90 degree angles suits installations that rely on crisp, square drawer faces, such as modern residential kitchens or commercial casework with straight-line styling. With a bottom panel that is cut to size without notching, fabricators can plan drawer bottoms as simple rectangles, which helps on projects that run many identical drawers from sheet goods. The H185 inset panel format keeps the panel face inset relative to surrounding fronts within the Vionaro concept, serving design schemes built around that specific drawer look.
The aluminum front panel profile holds shape under normal drawer use, so fastened joints between the panel and drawer sides stay aligned over time. The slimline 13mm side width sets a known reference dimension along both sides, which simplifies setting consistent gaps between the metal sides and the cabinet openings. Because the H185 inset front panels can be cut to length, installers can use stops and gauges on their saw or cutting station, helping multiple drawer fronts land at identical widths. The pre-drilled side of the panel gives a fixed hole position relative to the profile edge, so that side locates reliably on the drawer structure. The provided drilling template guides hole placement on the opposite side, reducing layout measuring and supporting repeatable clearances across a full bank of Vionaro drawers. Sold in both broken and full box quantities with discount available for full box orders, this setup supports both small batches and larger production runs using the same part number.
The Vionaro H185 drawer inset front panel is a color-coordinated aluminum front panel profile for Grass Vionaro drawers, so the drawer front integrates directly with the Vionaro drawer construction system.
The 13mm slimline side width sets a narrow, consistent edge at the drawer sides, which helps maintain sleek lines and simplifies aligning drawers within tight cabinet openings.
The H185 inset front panels can be cut to length, allowing one 45-11/16 inch panel to be trimmed for various drawer front widths on a project.
The pre-drilled side sets accurate hole locations, while the drilling template guides the other side, so both ends align with Grass Vionaro hardware consistently.
The bottom panel is cut to size without notching, so fabricators use straight rectangular cuts, reducing layout complexity and speeding drawer box production.
The Cubist design with 90 degree angles supports straight-line, modern drawer fronts, helping banks of Grass Vionaro drawers share a clean, squared appearance.
The Vionaro H185 drawer inset front panel, white, 45-11/16 inch length from Grass America gives installers a defined front component for the Grass Vionaro drawer system. With a color-coordinated aluminum front panel profile, Cubist 90 degree design, and slimline 13mm side width, the panel supports modern, straight-line casework layouts. Cut-to-length capability, a pre-drilled side, and a provided drilling template streamline repetitive drawer production. Offered by Wurth Baer Supply in both broken and full box quantities with discount available for full box orders, this panel fits jobs ranging from one-off cabinets to larger Vionaro-based installations.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  GFF136100319517 Mfr# F136100319517 | Grass America Vionaro H185 Accessory Set, Graphite, F136100319517 | ||||
Sold in: 1 Set |  GFF136100320517 Mfr# F136100320517 | Grass America Vionaro Cross Rail Connector, White, F136100320517 |