Profile, Solid Zinc Die Cast Pulls 3-3/4" & 5-1/16" c/c, Stainless Steel Pull

Profile Series Zinc Cabinet Pull For Clean Lines

Profile Series zinc cabinet pull from R. Christensen by Berenson is a solid zinc die cast handle in the Profile Series, so it delivers a consistent, rigid feel on cabinet and drawer fronts. The pull uses zinc material with a stainless steel finish, which gives the job a stainless look while keeping the weight and machining characteristics of zinc. The handle provides both 3-3/4 inch and 5-1/16 inch center to center mounting positions, so one pull can align with existing 96mm or 128mm hole patterns on cabinets. The overall length of 7-7/8 inch lets the pull span wider drawer fronts, which helps doors and drawers feel proportionally balanced. A projection of 15/16 inch gives finger clearance off the face frame, which matters when opening heavier drawers. The 11/16 inch width keeps the profile slim, which suits modern straight-line layouts.

Key Profile Series Pull Details For Installers

• This solid zinc die cast pull uses zinc construction, which supports clean machining at the mounting points and a solid feel once fastened on cabinet fronts.
• The stainless steel finish on the zinc body provides a stainless appearance, which helps match other stainless-looking components in the same room run.
• Center to center options of 3-3/4 inch and 5-1/16 inch give two fixed mounting patterns, which works where cabinets are drilled at either 96mm or 128mm spacing.
• The pull length of 7-7/8 inch spans more of the door or drawer, which provides a larger gripping area for users along the front edge.
• A projection of 15/16 inch sets the handle off the surface, which leaves space behind the pull for fingers without crowding the door face.
• The 11/16 inch width keeps the pull relatively narrow, which can help maintain a clean, linear look across multiple cabinet fronts.

Mounting Details For The 96mm And 128mm Pull

The Profile Series stainless steel finish pull provides both 96mm and 128mm center to center mounting distances, so it can line up with common metric drilling jigs on cabinet doors and drawers. The pull uses 8-32 x 1 inch screw size, which matches a standard cabinet hardware thread used in many shop setups. The overall 7-7/8 inch length works across face frame or frameless cabinetry, because the handle reaches across a useful portion of the panel. With a 15/16 inch projection, the pull stands off the surface enough for a firm grip while still keeping the profile tight to the door. The 11/16 inch width keeps the footprint modest, which helps when lining up several pulls in a bank of drawers.

Using The 1155-4SSL-P Pull In Real Projects

Where This Zinc Cabinet Pull Fits Best

The 1155-4SSL-P Profile Series pull is part of the Handles and Pulls class under Decorative Hardware & Moldings, so it suits cabinet and drawer front applications in woodworking projects. With center to center options of 3-3/4 inch and 5-1/16 inch, the pull can be used on fronts drilled to either 96mm or 128mm layouts across kitchen, bath, or shop cabinetry. The stainless steel finish on zinc allows the pull to sit visually with other stainless-look hardware runs, which keeps the hardware line consistent across multiple doors. Because the handle is 7-7/8 inch long, it works well on medium to wider fronts, where a smaller pull might look undersized. The Profile Series naming helps keep hardware selections uniform when matching other pulls from the same line on a project.

Details That Support Repeatable Cabinet Results

The solid zinc die cast construction of this Profile Series pull gives repeat hole alignment, because the casting provides stable mounting bosses around the 96mm and 128mm centers. Having these two fixed center to center dimensions, translated to 3-3/4 inch and 5-1/16 inch, means the same pull can follow common jig spacings without changing hardware style. The 8-32 x 1 inch screw size specification lets shops standardize drill and tap expectations anywhere this pull is specified. A projection of 15/16 inch offers consistent stand-off depth, so lines of doors share the same hand clearance, which supports a uniform feel when opening adjacent fronts. The 11/16 inch width and 7-7/8 inch length combine into a slim, elongated profile, which helps installers keep hardware straight and visually aligned across long cabinet runs.

Common Questions About The Profile Series Pull

Selecting This Pull For Your Next Run

This Profile Series zinc cabinet pull from R. Christensen by Berenson pairs zinc construction with a stainless steel finish, so it supports stainless-look hardware runs on cabinets. With 3-3/4 inch and 5-1/16 inch center to center options matching 96mm and 128mm drilling, it fits common shop layouts without changing pull style. The 7-7/8 inch length, 11/16 inch width, and 15/16 inch projection create a slim, accessible grip that suits banks of drawers or taller doors. For projects routed through Wurth Baer Supply, specifying the 1155-4SSL-P keeps part numbers clear while maintaining consistent Profile Series styling across the job.