Profile Series Zinc Cabinet Pull For Clean Lines

Profile Series zinc cabinet pull gives installers a solid zinc die cast handle with a stainless steel finish for cabinets and furniture where a modern metal look is needed. The pull body is made from zinc, so you get a sturdy feel when opening heavier cabinet fronts. Its stainless steel finish presents a neutral metal tone that coordinates with common stainless appliances and hinges in the same space. The pull measures 15-3/4 inches in overall length, giving longer doors or wider drawers a handle that spans more of the front for a balanced appearance. Projection is 15/16 inch, which sets enough hand clearance off the face for a comfortable grip while keeping the handle close to the surface. An 11/16 inch width keeps the profile slim so the pull reads as a straight, clean bar on the cabinet face.

Key Profile Pull Details For Cabinet Projects

• The Profile Series handle is made from zinc die cast material, which provides a rigid pull body that stands up to repeated use on high-traffic cabinet doors and drawers in everyday projects.
• A stainless steel finish on the zinc pull delivers a consistent metallic look that pairs with stainless fronts and hinges, helping keep hardware finishes visually aligned across a run of cabinets.
• The pull offers both 7-9/16 inch and 12-5/8 inch center-to-center mounting options, so the same handle style can be used across smaller and wider fronts while keeping hole spacing within these two standard spreads.
• An overall length of 15-3/4 inches gives the pull enough bar length for wider drawers or tall doors, letting hands catch the handle at different points without crowding a single small grip area.
• The 15/16 inch projection keeps the handle close to the face while creating practical finger clearance, which helps doors swing without the pull protruding far into walkways around cabinet runs.
• An 11/16 inch width keeps the profile narrow, so the pull reads as a simple linear detail that does not visually overpower the cabinet panel design or rail layout.

Mounting Dimensions That Support Straight Runs

This Profile Series cabinet handle uses 7-9/16 inch and 12-5/8 inch center-to-center measurements, which align with common drilling patterns on many cabinet layouts using those two spreads. The dual center-to-center configuration allows the same visual style to carry across mixed drawer widths or door sizes using either spacing. With a 15-3/4 inch overall length, the pull extends beyond the widest of the two mounting spreads, so the bar visually anchors larger drawer fronts when mounted. The 15/16 inch projection holds the bar close enough to the face to limit snag points along walkways yet provides a defined edge for fingers behind the pull. At 11/16 inch wide, the handle keeps a slim footprint on the stile or rail area, freeing space around it for other layout elements.

Where This Profile Series Pull Works Best

Using The Zinc Pull On Cabinets And Furniture

The Profile Series, solid zinc die cast pull from R. Christensen by Berenson is designed for cabinet and furniture installations that call for a straight bar look. As part of a decorative hardware and moldings handles and pulls category, it fits into jobs where visible hardware is part of the finished design. The zinc construction gives the pull a solid, weighty feel on doors and drawers, which helps doors close with a more controlled hand motion. The stainless steel finish supports use in kitchens, workrooms, or office cabinetry where nearby appliances or fixtures also use stainless tones. With the handle spanning 15-3/4 inches, it can visually bridge the width of broader drawer fronts, helping tie multiple drawer stacks together with a repeated line of hardware.

Why The Dual Center-To-Center Options Matter

Two center-to-center dimensions, 7-9/16 inch and 12-5/8 inch, let this Profile Series cabinet pull adapt to both medium and wide fronts without changing hardware style. On a project that mixes narrow and broad drawers, the 7-9/16 inch spacing can serve smaller fronts while the 12-5/8 inch spacing suits wider drawers in the same run. Using the same 15-3/4 inch bar length with these spacings keeps a consistent handle silhouette, which supports clean alignment down a bank of cabinetry. The 15/16 inch projection and 11/16 inch width combine to create a bar that is easy to grasp from the front while staying visually light on the face. Because the pull sits within a modest projection, fronts can pass adjacent doors or panels with less risk of hardware conflict along the swing path.

Common Questions About Profile Series Cabinet Pull

Select This Profile Pull For Matched Cabinet Runs

The Profile Series, solid zinc die cast pull in a stainless steel finish gives a single handle style that covers both 7-9/16 inch and 12-5/8 inch center-to-center layouts. With a 15-3/4 inch overall length, 15/16 inch projection, and 11/16 inch width, it supports consistent lines across cabinet doors and drawers. For projects using R. Christensen by Berenson decorative hardware, choosing this 1156-4SSL-P pull aligns cabinet runs around one modern bar profile.