Profile, Solid Zinc Die Cast Pulls 12-5/8" - 18-7/8" c/c, Stainless Steel Pull

Profile Series Solid Zinc Pull For Cabinets

Profile Series solid zinc pull gives installers a stainless steel finish option in a zinc die cast body, so cabinets gain the look of stainless while using hardware designed as decorative handles and pulls. The pull measures 23-5/8 inches in overall length, which spreads visual weight across wider cabinet fronts and tall pantry doors. A projection of 15/16 inch provides finger clearance off the door or drawer face, supporting a secure grip during everyday use. The 11/16 inch width creates a slender profile that works cleanly with modern cabinet lines while still offering a defined edge to pull against. A center-to-center range from 12-5/8 inches to 18-7/8 inches matches long drawer fronts or larger doors, so installers can use a consistent style across multiple cabinet sizes. The R. Christensen by Berenson brand positions this pull within a recognized decorative hardware line.

Key Profile Series Pull Details For Projects

• The zinc material described as solid zinc die cast gives this pull a metal construction that suits decorative hardware and moldings, supporting cabinet applications where metal pulls are preferred over non-metal options.
• The stainless steel finish provides a stainless appearance on zinc, helping match other stainless-look components across a kitchen or commercial millwork run while maintaining a unified visual style.
• The 23-5/8 inch length or diameter dimension covers a significant span on wide drawers, so a single handle can serve as the primary touch point across larger faces without needing multiple pulls.
• The projection of 15/16 inch sets the standoff from the cabinet face, allowing fingers to wrap behind the pull during opening and closing while keeping the handle close to the door for a low-profile look.
• The 11/16 inch width defines how much front surface the pull presents, shaping the visual line on the cabinet while providing a consistent grip edge along its entire run.
• The 12-5/8 to 18-7/8 inch center-to-center range aligns with extended handle layouts, giving layout flexibility when planning drilling positions on long fronts using this Profile Series pull.

Installation Dimensions For Accurate Pull Layout

The stated center to center range of 12-5/8 inches to 18-7/8 inches defines the spacing between mounting points, so installers can base drilling patterns directly on these measurements when planning cabinet fronts. The 23-5/8 inch overall length ties directly to how much space the pull occupies across a door or drawer, which matters when balancing the handle within rail and stile dimensions. A projection of 15/16 inch describes how far the pull extends away from the surface, influencing both hand clearance and the relationship to surrounding edges or adjacent doors. With an 11/16 inch width, installers know how close this Profile Series cabinet hardware sits to nearby design elements, helping coordinate spacing between multiple pulls in a run.

Using The Profile Series Pull In Cabinet Work

Where This Profile Series Cabinet Pull Fits

This Profile Series cabinet hardware, categorized as handles and pulls, suits cabinet doors and drawers where a longer pull length is preferred. The 12-5/8 inch to 18-7/8 inch center-to-center dimension positions it for wider fronts that benefit from extended grip coverage rather than small knobs. At 23-5/8 inches overall length, the pull spans a large portion of many drawer faces, creating a continuous line that can coordinate with linear cabinet designs in kitchens or workspaces. The stainless steel finish on zinc lets this R. Christensen by Berenson pull visually align with stainless surfaces, which helps when cabinets sit near stainless appliances or metal fixtures. Because it falls under decorative hardware and moldings, the pull is suited to applications where appearance and consistent style across multiple fronts are part of the project requirements.

Why These Dimensions Support Consistent Results

The fixed 23-5/8 inch length gives designers and installers a repeatable dimension when planning handle placement across several cabinet runs, supporting visual continuity from unit to unit. A projection of 15/16 inch limits how far the pull stands off the surface, which helps in tight corridors by keeping hardware closer to the carcass while still providing enough room for fingers. The 11/16 inch width helps produce a slim, linear look, which can be important when aligning several Profile Series solid zinc pulls on banks of drawers where uniform sight lines matter. The 12-5/8 inch to 18-7/8 inch center-to-center spread connects directly to drilling layouts, so repeated measurements can be transferred across multiple fronts for consistent hole alignment. As a zinc die cast pull finished in stainless steel, the component maintains the decorative intent of the Profile Series while delivering a surface appearance that ties into stainless themes in the surrounding millwork.

Common Questions About Profile Series Cabinet Pull

Choose This Pull For Long Cabinet Fronts

This Profile Series solid zinc pull with stainless steel finish provides a 23-5/8 inch length and 12-5/8 to 18-7/8 inch center-to-center range suitable for long cabinet fronts. Select this R. Christensen by Berenson handle when projects call for extended pulls that align with modern decorative hardware and moldings.