Berenson-R.Christensen Silhouette 2-1/2" (64 mm) Center to Center Stainless Steel Pull, 1162-4SSL-P

Silhouette Pull 64mm Center To Center For Cabinets

Silhouette pull 64mm center to center gives you a compact mounting span with a longer hand grip, so it works well on smaller cabinet fronts while still feeling substantial to the hand. This R. Christensen by Berenson Silhouette Series pull is identified as 1162-4SSL-P, which helps match it with other pieces in the same decorative hardware collection on a project. The pull uses a stainless steel finish over a zinc material body, combining a familiar stainless look with a zinc construction that suits typical cabinet hardware use. With a center to center measurement of 2-1/2 inches, it aligns with common drilling patterns for short cabinet and drawer fronts. The decorative hardware category and Silhouette collection positioning place this pull among handles and pulls intended for visible cabinet and furniture applications.

Key Silhouette Pull Details For Cabinet Projects

• The 2-1/2 inch (64 mm) center to center dimension sets standard mounting hole spacing, which simplifies layout when repeating this pull across a run of cabinet doors or drawers.
• The stainless steel finish presents a neutral metallic appearance that coordinates with many hinge and appliance finishes, helping projects keep a consistent look across the hardware set.
• The zinc material construction provides a typical base metal used in decorative handles, giving a familiar feel and weight in hand for everyday cabinet use.
• The 7-1/2 inch length creates a long grip area relative to the hole spacing, which can offer more finger clearance across wider drawer fronts or cabinet rails.
• The 1-1/16 inch projection sets how far the pull stands off the face, which affects finger clearance behind the pull and how far the hardware extends into the working space.
• The 9/16 inch width defines the front profile of the pull, influencing both the visual line on the door and the contact surface where fingers grab during operation.

Mounting Dimensions And Fit For This Cabinet Pull

The 64 mm center to center measurement on this Silhouette pull locates the mounting posts at a compact span, which can suit narrow rail widths on cabinet doors. The stated length of 7-1/2 inches means the bar extends well past the post locations, so the visual footprint is wider than the screw spacing, which affects how it fills the face of a drawer front. With a projection of 1-1/16 inches, the handle stands off the surface enough to create usable space behind it, which is important when grasping from above or below on thicker door edges. The width of 9/16 inches controls how slim the pull appears from the front, contributing to a linear, streamlined look on cabinet faces while still giving a defined edge for fingers to catch.

Using The Silhouette Cabinet Pull On Jobs

Where This Silhouette Pull 64mm Works Well

This Silhouette Series pull, classified under decorative hardware handles and pulls, is oriented toward cabinet and furniture applications where the pull remains visible as part of the finished design. The 2-1/2 inch center to center spacing makes it suitable for smaller doors and drawers often found in kitchens, baths, and built-in casework, where short drilling patterns are common. The 7-1/2 inch overall length allows it to span more of the panel or drawer front, so one pull can visually anchor a modest-width front without needing multiple handles. The stainless steel finish lets it sit alongside other stainless-look components, such as hinges and appliance fronts, which can support a uniform hardware appearance across a space. As part of the Silhouette collection named in the web description, this pull can be used in projects that repeat the same design language on base cabinets, wall cabinets, and furniture pieces.

Details That Support Consistent Cabinet Installation

The defined 64 mm center to center spacing on the 1162-4SSL-P pull provides a fixed drilling dimension, which helps keep hole patterns consistent when working from templates or CNC programs. Its 1-1/16 inch projection establishes a predictable stand-off from the door or drawer surface, which influences clearances when doors open near adjacent panels or appliances. The 9/16 inch width keeps the front profile narrow, which can be important when aligning multiple pulls across narrow frame members without crowding adjacent edges. The zinc material construction, paired with the stainless steel finish, results in a handle that visually matches stainless-themed layouts while using a standard decorative hardware base metal, which can simplify hardware coordination across a project. Identifying it by manufacturer part number 1162-4SSL-P helps specifiers call out this exact pull in drawings or material lists for repeatable ordering and installation.

Common Questions About The 1162-4SSL-P Cabinet Pull

Select This Pull For Matching Cabinet Hardware Layouts

The Silhouette pull 64mm center to center from R. Christensen by Berenson offers a 2-1/2 inch mounting span, a 7-1/2 inch overall length, and a stainless steel finish over zinc, so it fits cabinet projects needing consistent dimensions and a coordinated stainless-style appearance across multiple fronts.