Silhouette, Solid Zinc Die Cast Pulls 5-1/16" & 10-1/4" c/c, Stainless Steel Pull

Silhouette Series Zinc Cabinet Pull For Doors

Silhouette Series zinc cabinet pull gives you a solid zinc die cast handle in the Silhouette collection from R. Christensen by Berenson, so you match this pull with other pieces in the same family on a job. The stainless steel finish provides a stainless-look surface, which lets this pull coordinate with common stainless appliances and hinges in a run of cabinetry. The center to center options of 5-1/16 inches and 10-1/4 inches mean this pull works on smaller cabinet doors or wider drawer fronts that need two mounting points. A total length of 15-3/8 inches gives you a long gripping area across the front, helping users grab the pull comfortably on larger drawers. The decorative hardware and moldings handles and pulls classification keeps this product aligned with standard cabinet hardware layouts in shops and on site.

Key Silhouette Pull Details For Projects

• The solid zinc die cast material creates a rigid pull body, which helps the handle feel stable when mounted on frequently used cabinet doors and drawers.
• The stainless steel finish matches the stated finish description, which helps installers visually tie this pull into other stainless-look components on the same installation.
• The 5-1/16 inch and 10-1/4 inch center to center dimensions give two mounting patterns, which lets you fit this pull to cabinets drilled for either of these common spreads.
• The 15-3/8 inch stated length defines the overall run of the handle, which helps in laying out pulls so they align proportionally on tall doors or wide drawers.
• The 1-1/16 inch projection positions the grip off the cabinet face, which provides finger clearance between the pull and the door or drawer surface.
• The 9/16 inch width gives the front profile size of the pull, which helps you predict how the handle will look on narrow rails and stiles.
• The 8-32 x 1 inch screw size specification identifies the thread and length, which guides drilling and hardware selection during cabinet pull installation.

Cabinet Pull Mounting And Fit Details

The 5-1/16 inch and 10-1/4 inch center to center dimensions on this Silhouette Series zinc cabinet pull define the hole spacing, which aligns with drilling patterns used on many cabinet doors and drawers. The 1-1/16 inch projection sets how far the handle stands off the surface, which provides a consistent clearance plane across a kitchen or bath layout. The 9/16 inch width gives a slim handle edge, which helps when positioning pulls on narrow rails without crowding the panel. The 15-3/8 inch overall length lets installers span a sizable portion of a front, which can help with grip placement on wide drawer faces.

Using The Silhouette Pull In Cabinet Runs

Where This Silhouette Series Zinc Pull Fits

This Silhouette Series zinc cabinet pull is listed in decorative hardware and moldings under handles and pulls, which aligns it with standard cabinet door and drawer applications. The center to center options of 5-1/16 inches and 10-1/4 inches give flexibility for use on smaller doors, larger doors, or wide drawers that may use the longer spread. The 15-3/8 inch length suits situations where a longer linear pull is desired across the face, helping visually anchor tall pantry doors or deep drawer fronts. The stainless steel finish lets this pull sit alongside stainless sinks, appliances, and visible hinges, which can support a unified look across kitchens, baths, and built-ins. The R. Christensen by Berenson branding identifies a specific product family, which matters when matching this pull with other Silhouette Series hardware on multi-room projects.

Details That Support Consistent Pull Alignment

The 5-1/16 inch and 10-1/4 inch center to center measurements on this stainless steel finish cabinet pull give precise drilling locations, which helps installers repeat hole spacing accurately from cabinet to cabinet. The 1-1/16 inch projection keeps the pull at a consistent stand-off, which supports straight visual lines of hardware when viewing a bank of doors or drawers from the side. The 9/16 inch width constrains the profile of the pull, which can simplify layout when aligning multiples along narrow rails or next to molding details. The 15-3/8 inch total length offers a clear dimension for layout drawings, which aids in marking centerlines and end clearances during fabrication. The 8-32 x 1 inch screw size aligns with a common cabinet hardware thread, which supports straightforward fastening through typical door and drawer thicknesses.

Common Questions About Silhouette Cabinet Pull

Select This Silhouette Pull For Matching Projects

The Silhouette Series zinc cabinet pull with stainless steel finish, 15-3/8 inch length, and 5-1/16 inch plus 10-1/4 inch center to center options offers defined sizes that support planned layouts. Choosing this R. Christensen by Berenson handle lets you align cabinet door and drawer hardware around known projection, width, and length dimensions. Use the 8-32 x 1 inch screw size, the 1-1/16 inch projection, and the 9/16 inch width figures to coordinate drilling, spacing, and visual proportions across your next cabinet run.