
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Silhouette pull 160mm center to center describes a cabinet pull with a 6-5/16 inch mounting span, which lets you hit a common drilling pattern for many handle layouts and keep runs aligned across multiple cabinet fronts. The pull is part of the Silhouette collection, so a shop can repeat the same visual style across a full room of cabinets without mixing profiles. The material is zinc with a stainless steel finish, giving a metal body that works with the stainless look many shops specify for modern kitchens or commercial millwork. An overall length of 11-7/16 inch extends past the mounting holes, creating a long gripping surface that tradespeople can place comfortably at various hand heights on doors or drawers. A projection of 1-1/16 inch sets the pull off the face of the cabinet, creating working finger clearance while keeping the handle relatively close to the front for a tight, clean line.
This Silhouette pull uses a 6-5/16 inch, or 160mm, center to center measurement, so installers can translate that directly to metric or imperial setups when marking or drilling cabinet faces. The 8-32 x 1 inch screw size specified for this pull sets the thread and length expectation at the jobsite, letting installers match their boring depth in common cabinet door and drawer front thicknesses. With a projection of 1-1/16 inch from the mounting surface, the pull establishes predictable clearance behind the gripping area, which helps when planning for overlay doors that open near walls or adjacent cabinets. The overall 11-7/16 inch length and 9/16 inch width give a stable mounting footprint across the face, which can help hardware stay visually straight when aligned with rail or stile edges.
The R. Christensen by Berenson Silhouette Series pull sits in the Decorative Hardware and Moldings category under handles and pulls, so it is oriented toward cabinet and furniture fronts where appearance matters alongside function. Its stainless steel finish pairs with cabinetry that uses stainless appliances or stainless trim, helping designers carry a consistent metal tone through doors and drawers. The 6-5/16 inch center to center dimension positions this pull for installations on both doors and larger drawers, where that mounting span feels proportional to common cabinet widths. Because the pull length runs out to 11-7/16 inch, it can visually fill wider drawer fronts often found in base cabinets or built-in storage pieces. The zinc material base gives the pull a metal structure that sits naturally with other metal decorative hardware components offered for woodworking projects.
The 160mm center to center layout on this Silhouette pull allows shops to standardize drilling templates, so repeating the same hardware position across multiple cabinets becomes a straightforward, repeatable step. An 8-32 x 1 inch screw size spec means threads and shank length are predictable, which matters when hardware is going into doors and drawer fronts of typical thickness where consistent engagement is expected. The 1-1/16 inch projection works with the 9/16 inch width to define the three-dimensional envelope of the pull, which helps installers coordinate hardware placement relative to adjacent doors, drawers, and nearby walls. Overall length at 11-7/16 inch gives a clear reference for centering the pull on wider fronts, so layout lines can be pulled from panel edges and checked against that known dimension. Those combined measurements tie directly into jigs, boring patterns, and visual alignment methods used by cabinet shops and serious DIY workers.
The Silhouette pull uses a 6-5/16 inch, or 160mm, center to center measurement, so hole spacing is fixed for layout and drilling on cabinet doors and drawers.
The pull is made from zinc with a stainless steel finish, giving a metal body with a stainless appearance that matches cabinetry using stainless-toned components.
The R. Christensen Silhouette pull has an overall length of 11-7/16 inch, which helps it span wider drawer fronts and create a substantial visual line across the face.
The Silhouette pull projects 1-1/16 inch from the mounting surface, establishing finger clearance while keeping the handle relatively close to the cabinet front.
This pull is specified with an 8-32 x 1 inch screw size, which aligns with common cabinet hardware threading used in doors and drawer fronts.
The cabinet pull is part of the Silhouette collection from R. Christensen by Berenson, supporting consistent styling wherever that series is used.
The Silhouette pull 160mm center to center, R. Christensen by Berenson model 1163-4SSL-P, combines a 6-5/16 inch mounting span, 11-7/16 inch length, and 1-1/16 inch projection to give cabinet projects a consistent layout reference. With a zinc body in a stainless steel finish and a 9/16 inch width, it fits decorative hardware and moldings work where stainless-toned pulls are specified. For cabinet shops and serious DIY installers planning drilled fronts around a 160mm pattern, this handle offers fixed, documented dimensions that integrate cleanly into hardware jigs and layout routines.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BQ1165-4SSL-P Mfr# 1165-4SSL-P | 7-9/16"/14-5/32" Silhouette Finger Pull, Stainless Steel | ||||
Sold in: 1 Each | BQ1164-4SSL-P Mfr# 1164-4SSL-P | Silhouette, Solid Zinc Die Cast Pulls 5-1/16" & 10-1/4" c/c, Stainless Steel Pull | ||||
Sold in: 1 Each | BQ1162-4SSL-P Mfr# 1162-4SSL-P | Berenson-R.Christensen Silhouette 2-1/2" (64 mm) Center to Center Stainless Steel Pull, 1162-4SSL-P |