Berenson-R.Christensen Lips 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, 1182-1BPN-C

LIPS Edge Pull 160mm For Clean Cabinet Lines

LIPS EDGE PULL 160MM CC BRUSHED NICKEL is a zinc edge pull from the Lips collection by R. Christensen by Berenson, so it provides a consistent look when you are laying out multiple cabinets in the same space. The 6-5/16 inch (160 mm) center to center mounting spreads the load across a wider section of the door or drawer front, which helps the hardware feel solid in daily use. The brushed nickel finish softens reflections on cabinet faces, which is useful under strong task lighting common in kitchens and work areas. The pull length of 9-7/16 inches leaves visible grip area beyond the mounting points, which supports a comfortable hand position. A projection of 13/16 inch stands the pull off the surface enough for fingers to catch the edge, making opening doors and drawers straightforward.

Key Lips Edge Pull Details For Projects

• The Lips collection identity ties this pull to a defined decorative line, which helps keep hardware style consistent across doors and drawers in the same room or bank of cabinets.
• Construction in zinc provides a stable base material, which supports the brushed nickel finish and keeps the pull feeling firm when mounted to cabinet fronts.
• The brushed nickel finish offers a muted metallic surface, which helps the pull sit quietly against both light and dark cabinet colors in residential or commercial spaces.
• A 6-5/16 inch (160 mm) center to center dimension matches common drilling patterns, which simplifies layout when positioning handle boring on new cabinet doors or drawer fronts.
• The overall length of 9-7/16 inches gives the pull a long visual line, which helps it span wider drawer fronts and align with other linear elements in modern cabinet designs.
• The 1-13/16 inch width presents a substantial face at the edge, which creates a defined line that is easy to see and grasp along the door or drawer edge.
• A 13/16 inch projection creates stand-off from the surface, which gives enough clearance for fingers without pushing the hardware too far into the walkway or work zone.
• The 8-32 x 1 inch screw size matches a standard cabinet screw thread, which supports straightforward installation into typical cabinet door and drawer thicknesses.

Edge Pull Sizing And Mounting Considerations

The 6-5/16 inch (160 mm) center to center measurement on this pull sets the hole spacing, which guides drilling when you are laying out new fronts or replacing similar-size hardware. The 9-7/16 inch overall length means the pull extends beyond the mounting holes at both ends, which helps cover previous marks when swapping from another pull within the same general size range. With a width of 1-13/16 inches at the edge, the pull presents a broad contact area along the cabinet edge, which supports a firm grip when opening heavier drawers. The 13/16 inch projection keeps the pull close to the cabinet face while still allowing room for fingers, helping maintain a slim profile across doors and drawers.

Using This Lips Edge Pull In Cabinet Runs

Where This Brushed Nickel Edge Pull Fits

This Lips series pull is categorized under handles and pulls decorative hardware, which positions it for cabinet doors and drawer fronts in woodworking projects. The brushed nickel finish works with a range of laminate, painted, or wood surfaces, which gives flexibility when you are tying hardware into existing casework. Because the pull length is 9-7/16 inches, it visually suits medium and larger fronts, which helps maintain proportion on banks of drawers or tall pantry doors. The 6-5/16 inch center to center dimension aligns with a common metric spacing of 160 mm, which is useful when you are matching existing drilling patterns from other Lips collection pieces or similar modern hardware.

Details That Support Repeatable Cabinet Installations

The defined 6-5/16 inch (160 mm) center to center spacing allows you to standardize your boring setup, which speeds repetitive installs across multiple fronts in a kitchen or commercial run. The consistent 1-13/16 inch width provides a predictable reveal along the edge, which helps align pulls visually from cabinet to cabinet. A projection of 13/16 inch keeps the handle close to the face, which reduces the chance of catching clothing in tight corridors while still leaving usable finger clearance. The use of a standard 8-32 x 1 inch screw format ties into common shop hardware, which keeps installation steps straightforward when you are working through a full job. Being part of the Lips collection, this R. Christensen by Berenson pull makes it easier to repeat the same profile across doors and drawers, which supports a uniform finished look.

Common Questions About The Lips Edge Pull

Selecting This Lips Pull For Cabinet Work

The combination of a 6-5/16 inch (160 mm) center to center, 9-7/16 inch overall length, and 1-13/16 inch width positions this Lips edge pull for cabinets where a longer, linear handle suits the layout. The zinc construction with brushed nickel finish ties it into a wide range of casework finishes, making it practical for both new installs and hardware refreshes. When a project calls for an edge pull from the Lips collection with brushed nickel finish and 160 mm center to center spacing, this 1182-1BPN-C model aligns cleanly with that requirement.