Berenson-R.Christensen Scoop 1-1/4" (32 mm) Center to Center Brushed Nickel Pull, 1195-1BPN-C

Scoop Edge Pull Brushed Nickel For Cabinets

Scoop edge pull brushed nickel describes this R. Christensen by Berenson pull designed from the Scoop collection to give cabinets a low-profile grip along the edge. The zinc material provides a solid base for a decorative pull that handles regular cabinet use. A brushed nickel finish offers a muted metallic look that blends with common cabinet hardware without calling attention to fingerprints. The 1-1/4 inch (32 mm) center to center mounting dimension lets this pull align with standard drilling for small cabinet and drawer fronts. Overall length of 2-13/16 inches keeps the pull compact on narrower faces while still giving enough finger access at the edge. A projection of 3/4 inch sets the hand clearance off the surface so doors and drawers can be opened comfortably. The 1-13/16 inch width spreads the contact area along the edge to distribute pulling force.

Key Scoop Edge Pull Details That Matter

• The 1-1/4 inch (32 mm) center to center mount positions the pull for tight layouts, helping multiple pulls line up consistently across narrow drawers or doors.
• The 2-13/16 inch length keeps the pull compact so it fits on smaller cabinet fronts while still providing a defined gripping area along the edge.
• The 3/4 inch projection stands the pull off the surface enough for fingers to catch the edge, supporting smoother opening motion on doors and drawers.
• The 1-13/16 inch width spreads load across more surface, which helps reduce stress on the mounting area during daily opening and closing.
• The brushed nickel finish on zinc pairs a decorative appearance with a stable base material, supporting everyday cabinet use in residential or shop-built projects.

Mounting And Center To Center Fit Details

The 1-1/4 inch (32 mm) center to center dimension sets the mounting holes at a tight spacing, which suits narrow rail sections on smaller doors or drawers. This measurement lets layouts follow consistent drilling patterns across multiple fronts, reducing layout differences from cabinet to cabinet. The 2-13/16 inch overall length keeps the pull proportionate to compact faces, which helps maintain visual balance when several pulls are installed in a row. A 3/4 inch projection locates the gripping point off the face to improve reach for fingers without pushing too far into walkways. With a 1-13/16 inch width, the pull covers more edge area, which supports a firm feel when mounted on lighter cabinet materials.

Using This R. Christensen Scoop Pull On Projects

Where This 32mm Center To Center Pull Fits

This R. Christensen by Berenson scoop pull from the Scoop collection works where a 1-1/4 inch (32 mm) center to center layout is planned, such as smaller cabinet doors or drawers that do not suit longer bar pulls. The zinc construction gives cabinet makers a decorative pull that integrates into typical cabinet hardware assemblies without adding structural complexity. A total length of 2-13/16 inches lets the pull fit neatly along shorter drawers, which helps when working with narrow face frames or slab fronts. The 1-13/16 inch width matches well with edge applications, giving enough surface for the scoop profile to be comfortable along the fingers. A brushed nickel finish coordinates with other brushed nickel components in a project, supporting a consistent visual run across a full bank of cabinets.

Details Supporting Repeatable Mounting And Layout

The 1-1/4 inch (32 mm) center to center spacing gives installers a fixed drilling reference, helping repeated fronts stay aligned from one cabinet to the next. With a 3/4 inch projection, the pull geometry places the contact point at a predictable distance off the face, which supports smooth operation when doors swing past adjacent surfaces. The 2-13/16 inch overall length and 1-13/16 inch width define a compact footprint, so shop layouts can be planned to avoid rail intersections or panel edges. Zinc as the base material keeps the part weight manageable during handling and mounting, which is useful when setting multiple pulls across a production run. The brushed nickel finish offers a consistent sheen that ties together different cabinet sections under the same hardware line.

Common Questions About This Scoop Edge Pull

Selecting This Scoop Edge Pull For Your Job

The R. Christensen by Berenson Scoop collection pull with 1-1/4 inch (32 mm) center to center sizing, 2-13/16 inch length, and 3/4 inch projection gives cabinet projects a compact edge pull in brushed nickel. The zinc construction and 1-13/16 inch width support everyday cabinet operation while keeping the footprint efficient on smaller doors and drawers. For projects built around brushed nickel decorative hardware with tight drilling patterns, this Scoop edge pull aligns dimensions and finish so layout, appearance, and hand feel work together on the finished install.