Berenson-R.Christensen Scoop 6-5/16" (160 mm) Center to Center Polished Chrome Pull, 1196-1026-C

Scoop Edge Pull 160mm Polished Chrome For Cabinets

Scoop edge pull 160mm polished chrome describes this R. Christensen by Berenson cabinet pull with a 6-5/16 inch center to center, which provides a defined grip span that helps installers line up drilling locations across multiple doors and drawers. The Scoop Series design in polished chrome gives a bright, reflective finish that visually matches other polished chrome decorative hardware in a project, supporting a consistent look across a run of cabinets. Constructed from zinc, this pull offers a solid metal feel that helps doors and drawers feel substantial when operated. A projection of 3/4 inch sets the pull away from the cabinet face just enough for fingers to catch the edge, which supports comfortable use without requiring deep clearance. A width of 1-13/16 inch establishes the visible footprint on the cabinet front, which matters when laying out pulls in relation to panel widths and door rails.

Key Scoop Edge Pull Details For Projects

• The 6-5/16 inch center to center dimension defines the exact hole spacing, which lets installers use templates or jigs for repeatable drilling on multiple fronts.
• The overall 9-7/16 inch length creates a long linear pull that works well across wider drawers, helping the hardware look proportionate to the front size.
• The polished chrome finish provides a bright surface that coordinates with other polished chrome components, supporting a unified finish schedule.
• The zinc material gives the pull a metal construction that feels solid in hand, which supports a quality feel when doors and drawers are operated repeatedly.
• The 3/4 inch projection keeps the pull shallow off the face, which helps in tight clearances while still allowing a practical finger grip.
• The 1-13/16 inch width defines the coverage area on the door or drawer, which helps with positioning in relation to edges, rails, and stile proportions.

Mounting And Fit Of This Cabinet Pull

This R. Christensen by Berenson pull uses a 6-5/16 inch center to center layout, so holes are set on that fixed spacing to match the integral posts, which supports straight alignment across a bank of fronts. The pull uses an 8-32 x 1 inch screw size, giving installers a known threaded interface that matches common cabinet drilling practices. With a projection of 3/4 inch, the pull sits relatively close to the cabinet face, which helps maintain low profile lines while still allowing enough clearance for typical finger grip. The 9-7/16 inch overall length provides a long reference when setting it parallel to door edges, which aids in visual alignment along rails and across stacked drawers. A width of 1-13/16 inch presents a defined band of hardware on the face, which helps align it with centerlines or design features on the cabinet.

Using The Scoop Edge Pull In Cabinet Work

Where This R. Christensen Scoop Pull Works Best

This pull belongs to the Scoop Series, which identifies it as part of a coordinated line that can be used across doors and drawers to maintain the same profile throughout a project. The polished chrome finish positions it for jobs where a reflective metallic look is specified, so it fits designs that call for polished chrome decorative hardware and moldings. With a length of 9-7/16 inch and a 6-5/16 inch center to center, the pull suits medium to wide cabinet fronts where a longer piece of hardware balances the overall width. The 3/4 inch projection is useful on cabinets near walkways, because the hardware stays relatively close to the faces, helping maintain streamlined lines along the run. A width of 1-13/16 inch creates a clear horizontal or vertical bar of metal on the front, which designers can align with panel reveals or trim for a planned appearance.

Details That Support Repeatable Cabinet Installations

The defined 6-5/16 inch center to center dimension gives installers a precise measurement for drilling, which supports consistent handle placement when using drilling jigs or layout boards. Matching that, the 9-7/16 inch overall length means that once holes are drilled to the specified spacing, every pull will sit to the same span across the face, aiding in visual consistency over multiple cabinets. The specified 8-32 x 1 inch screw size means thread engagement is standardized, which supports predictable fastening into typical cabinet door and drawer materials. The 3/4 inch projection keeps the grip depth uniform from unit to unit, so users experience the same hand clearance whether operating a drawer or a door. The 1-13/16 inch width ensures each mounted pull occupies the same band of surface real estate, which helps installers maintain even sight lines relative to stiles, rails, and door edges.

Common Questions About This Scoop Edge Pull

Select This Pull For Polished Chrome Cabinet Runs

The R. Christensen by Berenson Scoop Series edge pull with 6-5/16 inch center to center, zinc construction, and polished chrome finish offers defined dimensions for disciplined layout work. Using the specified 9-7/16 inch length, 3/4 inch projection, and 1-13/16 inch width, installers can plan consistent placement across cabinet doors and drawers. For projects calling for polished chrome decorative hardware, this pull provides a matched option that aligns with the required measurements and finish so cabinet runs present a unified appearance.