Berenson-R.Christensen Scoop 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, 1197-1BPN-C

Scoop Edge Pull 160mm Brushed Nickel Use

Scoop edge pull 160mm brushed nickel describes a zinc pull from the Scoop Collection that grips the cabinet edge and operates doors or drawers with a low-profile handle. The 6-5/16 inch (160 mm) center to center drilling spaces fasteners consistently, which helps maintain alignment on runs of doors and drawers. The 9-7/16 inch overall length spans a wider section of the front, which spreads hand contact and can feel steadier when opening larger faces. The 3/4 inch projection keeps the pull close to the surface, which reduces snag potential while still giving enough clearance for fingers. The 1-13/16 inch width provides a broad face at the edge, which gives more purchase when pulling. The brushed nickel finish gives a muted metallic appearance, which supports decorative hardware layouts that call for a non-gloss metal look.

Key Scoop Edge Pull Details For Projects

• The Scoop Collection identity ties this pull to R. Christensen by Berenson product families, which supports visual coordination across multiple cabinet areas in a project.
• The zinc material forms a solid metal pull body, which provides a firm, consistent contact point every time the cabinet door or drawer is operated.
• The brushed nickel finish presents a subdued metal surface, which helps the pull sit visually between bright chrome and darker finishes on casework.
• The 6-5/16 inch (160 mm) center to center dimension fixes drilling locations, which simplifies layout when repeating this pull across a bank of cabinets.
• The 3/4 inch projection holds the grip close to the face, which limits overhang into walk paths while still leaving space for fingers at the cabinet edge.

Installation Details For 6-5/16 Inch Pull

The 6-5/16 inch center to center measurement on this R. Christensen by Berenson pull defines the distance between mounting holes, which drives boring setup on doors and drawers. The 8-32 x 1 inch screw size fits that mounting pattern, which aligns the pull with standard cabinet hardware threading. The 9-7/16 inch length gives clear reference points at each end, which helps when aligning the pull parallel to the door or drawer edges. The 1-13/16 inch width concentrates material at the edge, which supports a stable feel when the pull is tightened to the surface. The 3/4 inch projection controls how far the pull stands off, which affects how deep the boring can be before fasteners engage securely.

Using This R. Christensen Scoop Edge Pull

Where This Brushed Nickel Edge Pull Fits Best

The Scoop Collection name places this pull in a decorative hardware and moldings category, which makes it suitable where a defined design family is important across a cabinet installation. The handle and pull classification identifies it as a primary gripping point on cabinet doors or drawers, which positions it as the part users touch every time they access storage. The brushed nickel finish matches the SAP description and web description, which reinforces that this pull contributes a brushed metal look in kitchens, baths, or casework that favor that surface tone. The 6-5/16 inch (160 mm) center to center mounting suits layouts that use longer pulls on wider fronts, which can balance visual proportions on broad drawer faces.

Details That Support Consistent Pull Alignment

The 6-5/16 inch center to center spacing on this zinc pull standardizes the drilling pattern, which helps keep multiple handles aligned across rows of doors and drawers. The 9-7/16 inch overall length provides a known edge-to-edge dimension, which aids in setting consistent reveal distances from cabinet sides. The 3/4 inch projection sets a predictable stand-off, which makes it easier to coordinate with nearby tall doors or adjacent hardware without projecting too far. The 1-13/16 inch width gives a stable bearing surface against the face, which helps the pull sit flush when the 8-32 x 1 inch screws are tightened. Being part of the Handles and Pulls, Berenson product class situates this item among other decorative pulls, which supports repeatable selection when projects standardize on R. Christensen by Berenson hardware.

Common Questions About Scoop Edge Pull 160mm

Selecting This Scoop Edge Pull For Cabinets

The Scoop edge pull 160mm brushed nickel configuration aligns a 6-5/16 inch center to center pattern with a zinc body and brushed nickel finish, which suits cabinet runs that require consistent drilling and a unified brushed metal look. The 9-7/16 inch length, 1-13/16 inch width, and 3/4 inch projection define how it occupies the door or drawer front, which helps match this R. Christensen by Berenson pull to fronts sized for longer handles. Using the 8-32 x 1 inch screw size with this handle standardizes mounting, which lets this 1197-1BPN-C pull work cleanly within decorative hardware and moldings projects that specify this style.