Sugatsune ESR-DC4513-14 drawer slides are 14 inch full extension, ball bearing, side mount slides that let drawers travel their entire length so contents are fully reachable, which helps installers deliver maximum usable storage depth in cabinets and casework. The slides use a ball bearing design that supports smooth, controlled movement, which matters when a drawer is loaded and you want consistent travel without binding. A hold-in anti-rebound feature keeps the drawer in the closed position, which helps drawers stay shut under normal movement in a shop, office, or residential space. A positive stop is built into the slide travel, which limits over-travel and helps protect the slide and cabinet from impact at the end of stroke. These slides are stainless steel, which provides corrosion resistance in everyday interior environments where moisture or cleaning can be present.
These side mount drawer slides are designed for mounting with M4 or #8 binding, pan, or truss head screws, which gives installers familiar fastener options that seat well against the slide flange and help spread load on the mounting surface. The non-handed configuration means each slide can be used on either side of the drawer, which allows installers to pull from one stack of slides without sorting left and right parts during layout. A front disconnect feature lets the drawer be separated from the cabinet member near the front, which can simplify screw access in tight cabinets and make it easier to remove drawers later for alignment or service. The positive stop built into the travel helps define a consistent open position, which supports repeatable reveals across multiple drawers on a run.
Sugatsune ESR-DC4513-14 drawer slides are part of the side mount drawer slide class, which fits common cabinet and casework construction where slides fasten to the side of the drawer and cabinet. The 14 inch length suits medium-depth drawers often used in base cabinets, shop fixtures, office furniture, and similar projects where interior cabinet depth lines up with a 14 inch slide. Full extension movement lets the drawer clear the face frame or cabinet front so the back corner of the drawer can be reached, which is valuable when drawers are used for tools, hardware, or office items that should remain visible. The ball bearing design supports smooth running under normal drawer loads, which helps finished cabinetry feel precise and consistent when opened and closed.
The front disconnect on these slides lets the drawer member release from the cabinet member at the front, which can speed up production by allowing installers to mount cabinet members first, then attach drawer members on the bench and reconnect during final fit. The non-handed configuration simplifies inventory and setup because every slide in a case is used the same way on either side, which reduces time spent sorting parts when assembling multiple drawers. A hold-in anti-rebound detent helps the drawer stay fully closed when pushed in, which supports cleaner lines on cabinet faces and reduces the chance of drawers creeping open during normal traffic around the installation. The positive stop at the end of travel defines a repeatable open position, which helps align drawer fronts visually on multi-drawer banks when they are all pulled open. Stainless steel material helps the slides resist corrosion in typical indoor environments, which supports consistent motion over time where humidity or cleaning practices might otherwise affect finish. Mounting with M4 or #8 binding, pan, or truss head screws provides broad contact under the head, which spreads clamping force on the slide and mounting surface to support stable alignment.
The ESR-DC4513-14 is a side mount, full extension, ball bearing drawer slide, which supports smooth, full-length drawer travel in standard cabinet and casework construction.
The slides are 14 inches long, which helps match them to medium-depth drawers commonly used in base cabinets, shop fixtures, and similar furniture projects.
These slides mount on the drawer and cabinet sides using M4 or #8 binding, pan, or truss head screws, which gives a broad screw head bearing surface for stable installation.
Full extension means the drawer travels out to expose its full length, which makes items stored at the back of a 14 inch drawer easier to see and reach.
The hold-in anti-rebound feature provides a detent at the closed position, which helps the drawer stay shut and resist drifting open from vibration or minor contact.
The front disconnect allows the drawer member to separate from the cabinet member, which helps installers mount components and remove drawers later for adjustments or service.
The Sugatsune ESR-DC4513-14 stainless steel, side mount, full extension slides combine ball bearing movement, hold-in detent, and positive stop travel, which supports clean drawer action and alignment in finished cabinetry. The 14 inch length, non-handed design, and front disconnect feature work together to simplify layout and fit for both professional installers and serious DIY builders. Mounting with M4 or #8 binding, pan, or truss head screws fits common shop hardware, which supports straightforward installation on cabinets, casework, and fixtures that demand smooth, consistent drawer performance.
Sold In: 1 Pair
