Würth #8 x 1" Flat Head Assembly Screw Phillips Drive - Type 17 Auger Point Coarse Thread Zinc, 3670000084961 7000 - 7000/Box

#8 x 1 Inch Flat Head Assembly Screw Use

#8 x 1 inch flat head assembly screw from Wurth is a case hardened fastener with a coarse thread, so it is built for strong bite in typical woodworking assemblies where a #8 diameter and 1 inch length fit the job. The flat head design sits down into a countersunk hole, which helps parts draw together flush for cleaner cabinet and fixture faces. The screw uses a #2 Phillips drive, so standard #2 Phillips bits engage positively and keep driving straightforward on site or in the shop. The Type 17 auger point is designed to start into material without heavy pre-driving force, which helps the screw pull into wood efficiently during production runs. The coarse thread pattern travels quickly through material, supporting faster assembly when repeated screw placements are laid out across a project.

Key Screw Details That Support Assembly Work

• The #8 diameter with 1 inch length targets light to medium fastening in wood-based assemblies, which helps installers tie parts together without excessive projection through standard stock thicknesses.
• The flat head profile is made to sit into a countersunk seat, which lets the head draw tight to the surface so hinges, slides, or trim can sit over the joint without rocking.
• The coarse thread form works with typical wood substrates, so each drive turns into firm holding power while reducing the turns needed in repetitive fastening layouts.
• The Type 17 auger point is shaped to enter material efficiently, which supports faster starting in wood and helps the screw advance under steady driver pressure.
• The case hardened construction gives the screw a hardened shell, which supports consistent driving torque during installation in shop or field conditions.
• The zinc finish listed for this screw provides a protective metal coating, which helps the fastener maintain its surface in normal interior woodworking environments.

Installation Details For #2 Phillips Drive Workflow

The Wurth #8 x 1 inch flat head assembly screw uses #2 Phillips drive bits, so a single common bit style handles installations across jobs where this screw is specified. This alignment between screw head and #2 Phillips drive keeps tool setups simple on cabinet lines or trim-out tasks. Because the length is 1 inch, installers can choose this screw where material stacks match that reach, helping prevent excessive screw tip breakout on the back face. The case hardened design supports consistent driver engagement, so the Phillips recess stays serviceable as torque is applied. The coarse thread layout pairs with the Type 17 auger point to advance the screw smoothly through wood-based materials, which supports a steady driving rhythm during repetitive assembly work.

Using This Wurth Assembly Screw In Wood Projects

Where This Type 17 Auger Point Screw Fits

The Wurth #8 x 1 inch flat head assembly screw with Type 17 auger point and coarse thread is suited to woodworking applications where a #8 diameter, 1 inch reach, and countersunk head layout match the material stack. Because the screw is case hardened, it is built for driving into typical wood-based substrates under standard assembly torque, which helps maintain head integrity as installations progress. The fully 1 inch threaded length on this size follows Wurth guidance that 3/4 inch and 1 inch lengths are threaded fully, so the threads engage along the entire shank in these shorter sizes. That full-thread engagement supports grip throughout the screw length in thin stock, which is useful in cabinet components and fixtures where material thickness is limited.

Why Coarse Thread And Full Threading Matter

The coarse thread on this #8 x 1 inch flat head assembly screw advances quickly through wood, so fewer driver turns are needed to seat the head, which is helpful during long production runs. The Type 17 auger point is structured to begin cutting into the material as the screw turns, which lets the screw pull itself into place once the point has engaged. With this 1 inch length threaded fully, the entire working portion of the shank contributes to holding, which is especially useful in 3/4 inch panels where maximum thread contact supports joint tightness. The #2 Phillips drive head matches common Phillips driver bits, which allows installers to maintain consistent bit use across multiple stations or tools while driving this specific screw. The zinc finish on the case hardened body gives the fastener a treated outer surface, which supports its role in interior woodworking environments where exposed steel would otherwise be more vulnerable.

Common Questions About This Wurth Assembly Screw

Selecting This Screw For Wood Assembly Tasks

The Wurth #8 x 1 inch flat head assembly screw combines a fully threaded 1 inch shank, coarse thread, and Type 17 auger point, so it supports secure fastening in wood-based projects using a common #2 Phillips drive. The zinc finished, case hardened body is structured for routine cabinet and woodworking assembly where a countersunk head and #8 diameter fit the material stack. For projects that match this length and thread style, this screw provides a straightforward option for repetitive fastening tasks.