D Wind Lift System With Push-Open Function

D Wind Lift System with Push-Open, Yellow Spring/Free Swinging is a Salice WIND lift mechanism for upward-opening cabinet doors, so it supports lift-up access where overhead clearance and clean fronts matter on work surfaces and wall units. The TYPE 'D' WIND LIFT SYSTEM, PUSH-OPEN design pairs the lift function with a push-open action, so the door opens by pressure instead of a handle, which helps when designing handle-free runs or working with gloved hands. This Salice WIND lift system is part of the Salice WIND Lift Systems product class, so it aligns with projects already using this hardware family across multiple cabinet lines. The FRAKFEPDSN9 designation identifies this specific variant, so shops can repeat the same motion feel and geometry across reorders without rechecking details. The yellow spring/free swinging setup supports the free swinging function, which helps the door travel smoothly into its open position in normal cabinet use.

Lift System Details That Support Cabinet Builds

• Use with doors as small as 8-5/8 inch tall lets you apply the same lift hardware on compact upper cabinets, so shorter wall units can still match the motion of taller runs.
• Mounting to the side or the top of the cabinet provides layout flexibility, so you can respond to internal obstructions or construction style while keeping consistent door motion.
• Use for very wide doors by adding additional mechanisms helps large fronts stay supported, so wide lift doors maintain alignment and reduce stress on hinges during repeated opening.
• Simple motion speed adjustment after installation lets you fine-tune the opening and closing action on-site, so you can dial in motion to match door weight and client preference.
• Multiple cover cap color choices allow the mechanism to blend with the cabinet interior, so the hardware appearance can match different finishes on higher-visibility projects.
• Height, depth, and side adjustments by automatic cam give three-way fine-tuning at the mechanism, so you can correct reveals and gaps without remounting the cabinet or door.
• Attachment to the door using a standard 35mm bore uses a familiar hinge-style drilling pattern, so door prep fits into existing boring setups in the shop or on site.

Wind Lift System Mounting And Motion Setup

This Salice door lift system mounts to the side or the top of the cabinet, giving flexibility to work around case construction, internal shelves, or structural rails while keeping the lift geometry consistent. It attaches to the door using a standard 35mm bore, so boring patterns match common hinge tooling and speed up workflow on production jobs. Simple motion speed adjustment after installation lets you modify the door movement once the door weight and front material are known, helping you tune the swing so doors travel at a controlled pace. Height, depth, and side adjustments by automatic cam provide built-in alignment control, so you can correct small install variances at the hardware rather than remaking doors. The yellow spring/free swinging configuration then supports the free swinging movement, so once activated, the door transitions smoothly into its open position.

Using This Salice WIND Lift System In Projects

Where This FRAKFEPDSN9 Lift System Fits Best

This FRAKFEPDSN9 lift mechanism works for doors as small as 8-5/8 inch tall, so it fits upper cabinets and shallow wall units that still need lift-up access. It can be mounted to the side or the top of the cabinet, allowing use in frameless carcasses, framed constructions, and specialty cases where interior layout might crowd the usual mounting zone. The ability to handle very wide doors by adding additional mechanisms supports long, continuous fronts on overhead runs, so designers can keep uninterrupted faces across appliances or work zones. Multiple cover cap color choices let the Salice WIND lift system coordinate with light or dark interiors, which keeps the inside of open cabinets visually clean in kitchens, shops, and commercial spaces.

How WIND Adjustments Support Repeatable Installations

The push-open function in the TYPE 'D' WIND LIFT SYSTEM, PUSH-OPEN eliminates the need for a pull, so fabricators can build handleless fronts while still giving users easy access with a light push. Height, depth, and side adjustments by automatic cam give three-axis control at the lift system, so installers can align reveals across banks of doors and correct minor drilling variations quickly. Motion speed adjustment after installation lets the door movement be refined after fronts and hardware are fully assembled, so different door constructions can share a consistent opening feel. Attaching to the door with a standard 35mm bore keeps drilling in line with established hinge processes, which supports repeatable results across multiple doors and projects. As part of the Salice WIND Lift Systems category, this Salice WIND lift system helps shops standardize on one mechanism style, reducing variation in drilling patterns and simplifying future service or replacements.

Common Questions About This Salice WIND Lift System

Selecting This WIND Lift System For Your Cabinets

The D" Wind Lift System with Push-Open, Yellow Spring/Free Swinging combines a Salice WIND lift system body with push-open action, standard 35mm door attachment, and cam-based three-way adjustment, so it fits smoothly into professional cabinet workflows. Use its ability to work with doors as small as 8-5/8 inch tall, handle wider fronts with additional mechanisms, and mount to the side or top of the cabinet to match your case design and motion requirements on the next run of overhead cabinets.