Salice WIND Lift System For Push-Open Doors

Salice WIND lift system with push-open, double yellow spring is a lift mechanism for cabinet doors that opens with a push action and uses a specific spring strength, giving installers a defined operating feel suited to the intended door range. The TYPE I WIND lift system, push-open design eliminates the need for external door pulls in many layouts, which helps when planning clean cabinet fronts or tight clearances. Doors can be as small as 8-5/8 inches tall, so this mechanism works for compact upper cabinets where traditional lift hardware may not fit. The mechanism belongs to the Salice WIND lift systems product class, so its behavior and adjustments match that family for consistent setup across jobs. The manufacturer part FRAKFEPISN9 identifies this exact configuration, helping shops and installers reorder the same action and geometry when repeating a successful layout.

Lift System Details That Support Cabinet Builds

• Use with doors as small as 8-5/8 inches tall, so shorter wall cabinets still gain a lift-up motion instead of swinging doors, which can improve access in tight spaces.
• Mount to the side or the top of the cabinet, giving flexibility when interior obstructions, cabinet construction, or design preferences dictate where the lift mechanism can be fixed.
• Use for very wide doors by adding additional mechanisms, allowing the lifting work to be shared across more units so motion and alignment stay controlled across the span.
• Adjust motion speed after installation, so installers can fine-tune how quickly the door travels, dialing in movement that feels appropriate for the specific door size and weight.
• Choose among multiple cover cap colors, so the visible portion of the mechanism can coordinate with interior or hardware finishes, improving the finished cabinet appearance.
• Attach to the door with a standard 35mm bore, which matches common hinge boring machinery and drilling patterns already used in most cabinet shops.

Installation, Mounting, And Adjustment Workflow

The Salice WIND lift system mounts to the side or the top of the cabinet, so installers can work with existing case construction and interior layouts without redesigning boxes. Door connection uses a standard 35mm bore, letting production rely on established boring equipment and jigs for repeatable setups. Height, depth, and side adjustments are handled by automatic cam, so alignment tweaks happen at the mechanism with tool-operated cams rather than relocating pilot holes. Motion speed adjustment after installation means the lift system can be tuned once the actual door is hung, improving final behavior without guessing spring response in advance. Double yellow spring specification defines the internal spring strength used in this model, which ties directly to the expected performance range when matched with suitable fronts.

Using This TYPE I WIND Lift In Real Projects

Where This Salice WIND Lift System Performs Best

This Salice WIND lift system with push-open, double yellow spring is suited to upper cabinets and similar enclosures where a lift-up motion is desired and door height can start at 8-5/8 inches. The mechanism sits in the Salice WIND lift systems category, so it aligns with design expectations for compact, side-mounted or top-mounted lift hardware. Because the unit can be mounted either to the side or the top of the cabinet, it adapts to different carcass designs, from narrow vertical cabinets to more traditional wall boxes. For very wide doors, additional mechanisms can be added, allowing larger single fronts to be supported along the width, which helps keep motion consistent across the entire opening. The push-open action matches layouts where a handle-free front is preferred, simplifying the exterior design when paired with appropriate touch-latch workflows.

Why These Adjustments Support Repeatable Cabinet Results

The WIND lift system offers height, depth, and side adjustments by automatic cam, so once the mechanism is installed, door reveals can be dialed in through the cams rather than re-drilling mounting points. This reduces rework when fine-tuning the margins between adjacent doors or panels. Door attachment through a standard 35mm bore means boring operations can stay standardized across hinge and lift-equipped fronts, easing production planning and fixture setup in the shop. Simple motion speed adjustment after installation lets installers match the opening and closing behavior to the actual door construction, which helps when door material or overlay changes between projects. Multiple cover cap color choices let builders align visible hardware with cabinet interiors or design schemes, supporting a more controlled finished look while still using the same core mechanism geometry and adjustments.

Common Questions About This WIND Lift System

Selecting This WIND Lift For Your Next Build

The Salice WIND lift system with push-open, double yellow spring and TYPE I WIND configuration brings side or top mounting, 8-5/8 inch minimum door height, and standard 35mm boring into a single mechanism. These traits support predictable layouts for upper cabinets and similar enclosures, while height, depth, and side cam adjustments and post-install motion speed tuning streamline on-site alignment. For projects needing touch-activated lift-up fronts with familiar boring patterns and flexible mounting, this Salice WIND lift system offers a defined setup path for repeatable cabinet runs.