WIND Lift Systems & Cover Sets Black Spring

TYPE F WIND Lift System Push-Open Use

TYPE F WIND lift system push-open describes a Salice America mechanism designed to open doors with a push, which streamlines access on upper cabinets where handle-free fronts are preferred. The product belongs to the Salice WIND lift systems class, so it is intended specifically for door lifting applications rather than basic hinges. It can be used with doors as small as 8-5/8 inches tall, which lets you cover shorter wall units without swapping to a different series. The mechanism can be used for very wide doors by simply adding additional mechanisms, so large single fronts can still lift smoothly instead of requiring split fronts. The unit is attached to the door using a standard 35mm bore, aligning with common hinge boring patterns so door preparation stays familiar. Salice identifies this version as TYPE F WIND lift system, push-open, so the lift action integrates with push-to-open cabinet layouts.

Key WIND Lift System Details For Projects

• The lift system can be used with doors as small as 8-5/8 inches tall, so it covers a broad range of upper cabinet sizes while keeping hardware type consistent across a run.
• The mechanism can be mounted to the side of the cabinet, giving flexibility when interior clearances or construction details favor vertical panel mounting.
• The mechanism can be mounted to the top of the cabinet, which helps when side panels are tight or when a cleaner interior side appearance is desired.
• The system can be used for very wide doors by simply adding additional mechanisms, supporting long fronts while distributing load across multiple lift points.
• Simple motion speed adjustment is available after installation, so the opening and closing movement can be tuned on-site without changing parts.
• Height, depth, and side adjustments by automatic cam allow fine-tuning of door position on the cabinet, helping align reveals and eliminate rub points.
• The lift is attached to the door using a standard 35mm bore, so boring setups and jigs remain the same as standard hinge cups for efficient processing.
• Multiple cover cap color choices are available, letting the visible cover better match cabinet interiors or design schemes.

Lift System Mounting And Adjustment Workflow

The Salice WIND lift system uses side or top mounting to the cabinet, so installers can choose the fixing surface that best fits the cabinet construction. The mechanism attaches to the door using a standard 35mm bore, which keeps drilling layouts consistent with standard cup-hinge machinery and speeds shop production or on-site boring. Height, depth, and side adjustments by automatic cam provide three-way alignment at the lift hardware level, so the door can be shifted without redrilling or moving the cabinet. Simple motion speed adjustment after installation lets the installer regulate how quickly the door moves, so the motion can be matched to front size and cabinet use. Multiple cover cap color choices allow the visible mechanism cover to coordinate with surrounding surfaces, supporting projects where interior appearance matters.

Using This Salice WIND System In Cabinets

Where This Salice WIND Lift System Fits Best

The WIND lift systems black spring version is designed for door lifting applications on cabinets, tying directly to projects that fall under work surface and tables, lift systems, lid supports, and stays. Mounting to the side or the top of the cabinet gives flexibility in wall cabinet layouts, island structures, or other furniture pieces that share similar carcass geometry. Being usable with doors as small as 8-5/8 inches tall means shorter cabinets can still share the same WIND lift system, maintaining consistent hardware aesthetics and function across stacked or varied-height runs. The ability to handle very wide doors by simply adding additional mechanisms supports long horizontal fronts, which are common in contemporary designs using wide lift-up doors. The attached standard 35mm bore connection to the door keeps this product in line with typical European-style cabinet construction, aligning with existing production methods.

Why These WIND Lift Details Support Consistent Results

Salice identifies this product as TYPE F WIND lift system, push-open, so its push-open function works with handle-free fronts where the door is activated by pressure rather than a pull. Simple motion speed adjustment after installation allows the installer to tune the opening and closing rate to suit front size and user preference, contributing to controlled movement rather than abrupt lifting. Height, depth, and side adjustments by automatic cam let the door be aligned in three directions using a tool at the mechanism, which reduces the need to modify the cabinet or door once mounted. The multiple cover cap color choices help the hardware visually blend with different cabinet interiors, keeping the lift system from dominating the inside appearance. The manufacturer part number FRAKFEPFSN9 clearly identifies this TYPE F configuration within the Salice WIND family, which matters when matching hardware across multiple units on the same job.

Common Questions About This Salice WIND Lift

Choose This WIND Lift System For Push-Open Fronts

The TYPE F WIND lift system, push-open from Salice America combines push activation with lift-up motion, fitting cabinet projects that use handle-free doors. Side or top mounting to the cabinet and a standard 35mm bore connection support straightforward integration into European-style carcasses. Height, depth, and side adjustments by automatic cam, plus motion speed adjustment after installation, provide on-hardware tuning for alignment and movement. The ability to work with doors as small as 8-5/8 inches tall and to handle very wide doors by adding mechanisms lets one system address varied cabinet sizes. Multiple cover cap color choices support visual coordination on exposed interiors, aligning function and appearance on finished installations.