Rev-A-Shelf drip tray helps protect the bottom of a sink cabinet from minor leaks while keeping the under sink organizer area easier to manage. This Rev-A-Shelf SBDT Series drip tray is an Orion Gray sink cabinet drip tray sized at 28-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high. The trim-to-fit drip tray design is made for 30 inch, 36 inch, and 40 inch base sink cabinets. As a cabinet leak protection tray, it holds up to 1.75 quarts of water, which can help contain small plumbing drips before they spread across the cabinet floor. It is packed and sold as each, making it a practical choice for single-cabinet installs, replacements, or new cabinet projects.
Key specs to confirm: This under sink organizer tray is listed at 28-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high. It is a trim-to-fit drip tray designed for 30 inch, 36 inch, and 40 inch base sink cabinets, and it holds 1.75 quarts of water. Before purchase, confirm your actual cabinet interior dimensions, plumbing locations, and any obstructions at the cabinet floor. If your project requires safety, load, compliance, or other technical documentation, those details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf SBDT Series Orion Gray drip tray, packed and sold as each.
What to verify before ordering: Check cabinet inside width and depth, confirm the tray can be trimmed as needed for your sink base, review how supply lines or drains affect placement, and make sure the listed dimensions fit your cabinet floor area after accounting for hinges, center stiles, or other interior parts.
A sink cabinet is one of the most common places for slow plumbing leaks to go unnoticed. Supply lines can sweat, drain fittings can loosen over time, and minor leaks can stain or swell the cabinet bottom before the problem is caught. A sink cabinet drip tray is used to create a contained layer at the base of the cabinet so small amounts of water do not contact the cabinet floor directly.
This Rev-A-Shelf drip tray is built for that use case. The product data states that it is designed to protect a sink cabinet from minor leaks and that it holds 1.75 quarts of water. For a buyer managing a kitchen or bath cabinet install, that means the tray serves as a practical barrier in the area most exposed to plumbing drips. The 3/4 inch height helps form a shallow containment edge, while the 28-1/2 inch by 23-1/4 inch size gives a clear baseline for layout planning.
The trim-to-fit drip tray format matters when the cabinet interior is not perfectly open. Many base sink cabinets have pipes, disposal connections, or framing details that affect usable floor space. Because this model is described as trim-to-fit and designed for 30 inch, 36 inch, and 40 inch base sink cabinets, it can suit a range of cabinet installations if the actual interior measurements are confirmed first. Buyers searching for an under sink drip tray, a base sink cabinet drip tray, or RSSBDT-2730-OG-1 are usually trying to match a tray to a specific cabinet opening, not just buy by nominal cabinet size. That is why measuring the true inside floor area is still important.
This product also fits buyers replacing a worn tray or adding protection during a cabinet refresh. The Orion Gray drip tray color offers a clean, neutral appearance inside the cabinet. If your project includes pull-out accessories or other under sink organizer components, confirm that this tray will not interfere with their mounting points or travel path.
When comparing an under sink organizer tray, buyers usually focus on three things: cabinet fit, water containment, and ease of installation. This Rev-A-Shelf SBDT Series drip tray gives verified information in all three areas. It has stated dimensions, it is made for named base sink cabinet sizes, and it has a listed 1.75 quart capacity for minor leaks.
Some trays are chosen only by nominal cabinet size, but that can lead to mistakes if interior dimensions are reduced by cabinet construction details. A trim-to-fit drip tray can be a better match when the opening is close but not exact. This product type is especially useful when installers need flexibility across more than one cabinet width range. Here, the product data specifically lists 30 inch, 36 inch, and 40 inch base sink cabinets, which helps narrow the intended application.
Another comparison point is how clearly the product purpose is defined. This Rev-A-Shelf drip tray is described as a sink cabinet protector against minor leaks, not as a large spill pan or a structural cabinet insert. That distinction helps buyers choose the right product for routine leak management rather than expecting unverified heavy-duty performance. If your job requires a precise cut pattern, special hardware, or documentation beyond the listed dimensions and capacity, those details should be confirmed before ordering.
For buyers who value consistency, a branded product with a clear category and application can simplify ordering. Rev-A-Shelf identifies this item within the SBDT Series and under the under sink organizer class, which helps match replacement needs and cabinet accessory plans more accurately than a generic tray with limited product data.
This Rev-A-Shelf drip tray is designed for 30 inch, 36 inch, and 40 inch base sink cabinets, but the actual cabinet interior should be measured before ordering.
This sink cabinet drip tray is listed as trim-to-fit, so installers should confirm the needed cut size against the cabinet floor and plumbing layout.
The Rev-A-Shelf SBDT Series drip tray measures 28-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high.
This under sink drip tray holds 1.75 quarts of water and is intended to protect a sink cabinet from minor leaks.
This under sink organizer product is specifically a drip tray designed to protect the cabinet bottom from minor leaks.
The Rev-A-Shelf drip tray is listed in Orion Gray.
This product is packed and sold as each, so one order includes one drip tray unless otherwise confirmed at purchase.
This base sink cabinet drip tray requires confirmation of cabinet inside dimensions, plumbing obstructions, and any trim-to-fit cuts before installation. Follow manufacturer installation guidance and local building requirements where applicable.
Orion Gray drip tray is a practical choice when you need basic leak containment in a sink base cabinet and want a tray sized at 28-1/2 inches by 23-1/4 inches by 3/4 inch. This Rev-A-Shelf drip tray is sold as each and is designed for 30 inch, 36 inch, and 40 inch base sink cabinets. Before purchase, confirm your cabinet interior dimensions, any trim-to-fit needs, and how plumbing or other under sink organizer components affect placement so you receive the correct tray for the job.
Sold In: 1 Each