Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf drip tray helps protect a sink cabinet from minor leaks in everyday use. This under sink organizer from Rev-A-Shelf Corporation is part of the SBDT Series and is designed as a sink cabinet drip tray for 30 inch, 36 inch, and 40 inch base sink cabinets. The Orion Gray drip tray measures 34-1/2 inches wide x 23-1/4 inches long x 3/4 inch high and uses a trim-to-fit drip tray design to adapt the tray during installation. It holds 1.75 quarts of water, giving buyers a practical under sink leak tray for small plumbing drips or supply line moisture. For buyers comparing a base sink cabinet tray by size and series, RSSBDT-3336-OG-1 identifies this specific Rev-A-Shelf under sink organizer.
Key specs to confirm: This under sink organizer is a trim-to-fit drip tray with overall dimensions of 34-1/2 inches wide x 23-1/4 inches long x 3/4 inch high. Rev-A-Shelf lists it for 30 inch, 36 inch, and 40 inch base sink cabinets, so buyers should confirm the actual inside cabinet footprint, door opening, and interference from plumbing, disposal units, water filters, or support rails. The tray holds 1.75 quarts of water and is described as protection from minor leaks. If you need load, compliance, safety, or other technical details, those are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf SBDT Series Orion Gray drip tray, sold as each.
What to verify before ordering: Confirm your sink base cabinet size, inside floor dimensions, required trim amount, and clearance around drain lines and supply connections. Check that a 34-1/2 inch wide tray is appropriate for your cabinet before trimming, and verify that the tray depth and lip height work with your cabinet interior.
A sink cabinet drip tray is often chosen by installers, cabinet shops, property maintenance teams, and serious DIY buyers who want a simple layer of protection under plumbing. In many sink bases, small drips do not show up right away. A supply line fitting may sweat, a drain connection may loosen slightly, or a cleaning product may spill near the cabinet floor. A trim-to-fit drip tray gives the buyer a defined surface that can help contain minor moisture and make cleanup easier.
This Rev-A-Shelf under sink organizer is built around practical fit. The listed size is 34-1/2 inches wide by 23-1/4 inches long, and it is designed for 30 inch, 36 inch, and 40 inch base sink cabinets. That broad cabinet-size guidance is useful, but buyers should still measure the actual cabinet interior because plumbing layouts vary. A disposal, rear plumbing stack, or center support can change how much trimming is needed. The 3/4 inch height also matters because buyers should confirm that the tray edge will sit properly on the cabinet floor without interfering with existing hardware or obstructions.
For remodel work, a base sink cabinet tray can help when the cabinet itself is still usable but the owner wants better protection from future drips. For new cabinet installs, the tray can be added early as part of a clean under-sink setup. The Orion Gray finish gives the cabinet interior a neat appearance, and the 1.75 quart capacity provides a clear reference point for the kind of minor leak protection this product is intended to deliver. Buyers looking up RSSBDT-3336-OG-1 should treat it as a product-specific match within the Rev-A-Shelf SBDT Series and confirm final trim needs before installation.
When buyers compare one sink cabinet drip tray to another, the most useful differences are usually fit method, stated cabinet application, and listed capacity. This Rev-A-Shelf drip tray gives verified dimensions, a trim-to-fit format, and a stated use in 30 inch, 36 inch, and 40 inch base sink cabinets. That makes it easier to evaluate than a tray with unclear sizing or vague cabinet guidance.
Another practical comparison point is how clearly the product states its purpose. Rev-A-Shelf identifies this tray as designed to protect a sink cabinet from minor leaks, and the 1.75 quart capacity helps set realistic expectations. Buyers should not treat any under sink leak tray as a substitute for plumbing repair. Instead, it is a cabinet accessory that helps manage small moisture events while making them easier to notice.
Finish can matter as well, especially in visible sink bases with pull-out accessories or organized storage. The Orion Gray color supports a tidy look without drawing attention away from the cabinet interior. Because this is sold as each, buyers can order by cabinet count rather than by pack. For the most reliable purchase result, compare your measured cabinet floor area, plumbing path, and trim requirement against the listed dimensions instead of relying only on nominal cabinet size.
This sink cabinet drip tray is designed for 30 inch, 36 inch, and 40 inch base sink cabinets, but actual fit depends on interior dimensions and plumbing obstructions.
This Rev-A-Shelf drip tray is a trim-to-fit drip tray, so buyers can adjust fit to suit the cabinet interior.
The Rev-A-Shelf SBDT Series drip tray measures 34-1/2 inches wide x 23-1/4 inches long x 3/4 inch high.
This Orion Gray drip tray holds 1.75 quarts of water for minor leak containment.
This sink cabinet drip tray is described as protection for minor leaks, so major plumbing failures still require repair and direct cleanup.
This under sink organizer requires checking cabinet floor width, depth, plumbing clearance, and how much trimming is needed for your layout.
The Rev-A-Shelf drip tray is finished in Orion Gray.
This Rev-A-Shelf under sink organizer is packed and sold as each.
This cabinet accessory should be installed by following manufacturer installation guidance and local building requirements where applicable.
Sink cabinet drip tray selection comes down to cabinet fit, trim needs, and realistic leak protection. This Rev-A-Shelf under sink organizer includes one Orion Gray tray with a 34-1/2 inch x 23-1/4 inch x 3/4 inch profile and a 1.75 quart capacity for minor leaks. Before purchase, confirm your actual sink base interior, note any plumbing or disposal interference, and make sure the trim-to-fit format matches your installation plan. That quick check helps you order the right SBDT Series drip tray the first time.
Sold In: 1 Each