Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf drip tray helps protect the bottom of a sink base cabinet from minor leaks while adding a clean under sink organizer surface. This Rev-A-Shelf product is an SBDT Series drip tray in Orion Gray, sized at 40-1/2 inches wide x 23-1/4 inches long x 3/4 inches high. The sink cabinet drip tray is designed for 30 inch, 36 inch, and 40 inch base sink cabinets and can be used as a trim-to-fit drip tray when cabinet conditions require adjustment. For buyers planning a base sink cabinet tray to catch small drips, this under sink leak tray holds 1.75 quarts of water. It is packed and sold as each, which helps when ordering a single cabinet protection part for one installation or replacement project.
Key specs to confirm: This sink cabinet drip tray is listed at 40-1/2 inches wide x 23-1/4 inches long x 3/4 inches high and is designed for 30 inch, 36 inch, and 40 inch base sink cabinets. Because this is a trim-to-fit drip tray, confirm your actual cabinet interior width, depth, and any plumbing, disposal, or support locations that may affect trimming or placement. The tray holds 1.75 quarts of water, which is intended for minor leaks rather than major plumbing failures. If you need load, material composition, fastening method, or any compliance details, those should be confirmed with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf SBDT Series Orion Gray drip tray, packed and sold as each.
What to verify before ordering: Check your sink base cabinet opening and interior floor size, confirm the cabinet falls within the stated base sink cabinet range, review whether trim-to-fit adjustment is needed, and make sure the tray dimensions will clear plumbing and other items stored below the sink.
A sink base is one of the most common cabinet locations for moisture exposure. Supply line drips, small drain leaks, or condensation can leave water on the cabinet floor long before the issue is noticed. A sink cabinet drip tray gives that space a contained surface, which helps buyers spot moisture sooner and clean up faster. This is especially useful in kitchens, utility areas, and bath sink cabinets where cleaning products or household items are stored below the plumbing.
This Rev-A-Shelf drip tray is built around practical fit and cabinet protection. The verified size is 40-1/2 inches wide by 23-1/4 inches long by 3/4 inches high, and the product is designed for 30 inch, 36 inch, and 40 inch base sink cabinets. That makes it a useful option for installers and serious DIY buyers who already know their cabinet class and need to confirm whether a base sink cabinet tray will cover the floor area they want to protect. The trim-to-fit drip tray format also matters in real installs. Sink bases often vary because of cabinet construction, plumbing locations, or field conditions. A tray that can be trimmed gives the installer more flexibility, but the buyer still needs to measure carefully before ordering.
The 1.75 quart water capacity is another practical detail. An under sink leak tray with stated capacity helps frame the product's intended use. This tray is designed to protect a sink cabinet from minor leaks, not major pipe failures or flooding. For many buyers, that is the right use case: catching small drips, helping preserve the cabinet bottom, and creating a visible place where a leak can be noticed sooner. If your application involves unusual plumbing layouts, added accessories, or a non-standard cabinet interior, confirm fit against the actual interior dimensions rather than relying on cabinet label size alone.
When buyers compare an under sink organizer or drip tray, the most useful differences are usually fit range, whether the tray can be trimmed, and whether the dimensions match the cabinet floor. This Rev-A-Shelf under sink organizer is clear on those points. It is part of the SBDT Series, it is designed for 30 inch, 36 inch, and 40 inch base sink cabinets, and it is identified as a trim-to-fit drip tray. Those details support a more predictable ordering process because the buyer can compare cabinet size and tray size before purchase.
Another useful comparison point is intended function. Some under sink products focus on pull-out storage, while a sink cabinet drip tray focuses on cabinet floor protection from minor leaks. That distinction matters when the goal is to guard the cabinet bottom rather than add moving storage hardware. The Orion Gray drip tray also gives buyers a straightforward finish choice for a visible cabinet interior area.
Brand matters when consistency and product identification are important. Rev-A-Shelf is the listed brand, and this item has a defined manufacturer part number of SBDT-3942-OG-1, with the established search reference RSSBDT-3942-OG-1 often used by buyers matching an exact tray. For replacement or first-time installation, that makes it easier to verify you are ordering the correct product type. If you need details beyond the verified listing, such as exact material makeup or installation hardware, confirm those points before purchase so the tray matches your cabinet and installation method.
This Rev-A-Shelf drip tray is designed for 30 inch, 36 inch, and 40 inch base sink cabinets, but you should confirm your actual interior cabinet floor dimensions before ordering.
This sink cabinet drip tray measures 40-1/2 inches wide x 23-1/4 inches long x 3/4 inches high.
This Orion Gray drip tray is described as trim-to-fit, so buyers should still verify cabinet interior conditions and trimming requirements before installation.
This under sink leak tray holds 1.75 quarts of water and is designed to protect a sink cabinet from minor leaks.
This product is a drip tray in the under sink organizer class, so its verified purpose is cabinet floor protection rather than pull-out storage.
The Rev-A-Shelf SBDT Series drip tray is listed in Orion Gray.
This product is packed and sold as each, which verifies one drip tray per order.
This base sink cabinet tray should be checked against cabinet interior width, depth, plumbing clearance, and any trim-to-fit needs. Follow manufacturer installation guidance and local building requirements where applicable.
Orion Gray drip tray selection is easier when you match the verified dimensions, cabinet range, and intended use before purchase. This Rev-A-Shelf under sink organizer is sold as one tray and is designed to help protect sink base cabinets from minor leaks. Confirm the 40-1/2 inch by 23-1/4 inch footprint, review whether trim-to-fit adjustment will be needed, and check that plumbing and stored items will clear the tray once installed. Taking those steps helps you order the correct sink cabinet drip tray for your cabinet layout.
Sold In: 1 Each