Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Granat 6 inch 800 grit sanding disc describes a 6 inch diameter abrasive disc using P800 grit, which delivers very fine sanding suitable for finishing stages where surface refinement and scratch control are important. The hardened aluminum oxide abrasive gives a tough cutting surface that maintains its effectiveness, helping the disc stay productive over longer runs. The disc is part of Festool's Granat line, described as Festool's longest lasting and highest performing abrasive, so it is designed to stay on the tool longer before needing changeover. Multi-Jetstream II identifies the Festool hole pattern system, which manages dust at the sanding face, helping maintain consistent cutting and a cleaner work area. The hook and loop backing lets the disc attach quickly to compatible sanding pads, supporting fast disc swaps between grits when working through a finishing sequence.
The hook and loop backing on this abrasive disc matches hook and loop sanding pads, allowing quick disc mounting by pressing it to the pad and removing it with a simple peel, which supports fast grit changes in staged sanding processes. Using this fastening method helps center the disc on the pad by aligning to the backing face, supporting consistent rotation and sanding contact while the tool is running. When discs can be swapped without tools, it becomes easier to move from coarser grits to this 800 grit finish disc at the right stage, which supports planned sanding sequences. The 6 inch size matches 6 inch sanders using the Multi-Jetstream II interface, placing the abrasive over a defined sanding area that balances surface coverage with control at edges and profiles.
This abrasive disc is described as well-suited for a broad range of applications, so it is positioned for use on different project types without changing product families between steps. It is specified for clear coats, so it can be used when leveling or refining transparent finishes where maintaining clarity and controlling fine scratch patterns are important. It is also suited to composites, which covers many engineered surfaces where a consistent, controlled cut is needed to avoid surface damage. The disc can be used on mineral and solid surfaces, so it applies to countertop-type materials and similar panels where uniform sanding over larger, flat areas is common. Festool notes it is suitable for bare wood, paints, and most modern paint systems, so it can support both preparation and finishing passes across coated and uncoated wood components under one abrasive line. The abrasive also works on plastic materials, acrylics, and solid surface materials, which helps one 800 grit disc participate in finishing sequences across mixed-material assemblies that combine wood, solid surface, and plastic elements.
The hardened aluminum oxide construction provides a tough abrasive grain that maintains its cutting edges as it wears, helping the disc continue to refine surfaces rather than polishing ineffectively, which supports consistent finish quality from start to end of each disc's life. Being identified as Festool's longest lasting abrasive signals that the grain, bonding, and backing are configured to extend useful life, which can reduce downtime spent changing discs during extended sanding sessions. The description of Granat as Festool's highest performing abrasive reflects an emphasis on aggressive yet controlled cutting at each grit, so this P800 disc can remove fine imperfections efficiently while still leaving a smooth surface ready for subsequent finishing steps. Anti-clogging properties mean the abrasive is less likely to load with dust or finish material, which helps avoid burnishing or streaking and supports a more predictable scratch pattern over larger panels. The Multi-Jetstream II designation ties the disc to a specific dust-extraction hole pattern, which channels dust away from the sanding interface to maintain abrasive exposure and reduce dust between the pad and surface. Because the disc can work on bare wood, paints, modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, it allows a single abrasive family to handle fine finishing across many shop substrates, simplifying setup when moving from one project material to another.
This Festool Granat disc uses hardened aluminum oxide as the abrasive, which provides a tough cutting grain that maintains effectiveness across extended sanding, supporting consistent surface refinement.
This Festool Granat disc is P800 grit, giving a very fine cut that is suited to finishing or between-coat sanding where shallow scratches and smooth surfaces are required.
The anti-clogging properties help resist loading with dust and finish material, keeping abrasive grains exposed longer and supporting more uniform cutting with fewer cleaning interruptions.
This Granat P800 disc can be used on bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, covering many shop substrates.
This Festool disc has a hook and loop backing, which mates with hook and loop sanding pads so the disc can be pressed on and peeled off quickly during grit changes.
Multi-Jetstream II identifies Festool's dust-extraction hole pattern, which moves dust away from the sanding surface to keep the abrasive cutting effectively and help maintain finish quality.
The Festool Granat 6 inch 800 grit sanding disc combines hardened aluminum oxide, anti-clogging properties, and Multi-Jetstream II dust management, so it supports steady, fine sanding across bare wood, coated surfaces, plastics, acrylics, solid surface materials, and composites. Using this P800 disc in a finishing sequence lets you refine clear coats, paints, modern paint systems, and similar surfaces toward a smooth, uniform result while staying within a single Festool Granat abrasive line.
Sold In: 1 Box