Festool Granat 6 inch 500 grit sanding disc is a hardened aluminum oxide abrasive disc designed for a broad range of surface preparation and finishing tasks. The 500 grit rating provides a fine cut that supports controlled finishing on sensitive coatings and solid surfaces. Granat is Festool's longest lasting and highest performing abrasive, so each disc maintains cutting efficiency over more work, helping reduce disc changes during extended sanding. The disc is well suited for nearly all applications listed by the manufacturer, so one type of disc can serve multiple steps in a job. Anti-clogging properties help the abrasive stay open while working on materials that tend to load, maintaining a more consistent scratch pattern over time. The disc is structured for use with Multi-Jetstream II sanding systems, supporting efficient dust extraction where that interface is used. Hook and loop backing allows quick disc changes between grits or materials.
The disc uses a hook and loop backing, so it attaches to compatible hook and loop sanding pads without tools, supporting quick setup when moving between grits or machines that share this interface. The 6 inch diameter format matches sanders designed for that size, allowing the abrasive area to cover common cabinet and surface workpieces in fewer passes. The Multi-Jetstream II designation aligns the disc with sanding systems using that hole pattern, supporting dust extraction performance where that platform is in place. The 500 grit level positions the disc for fine sanding, so it can be brought into the sequence after coarser Granat or comparable abrasives to refine the surface. Because the abrasive is well suited for diverse specified materials, a shop can set up a dedicated 6 inch, 500 grit station for final sanding on those substrates.
The disc's anti-clogging properties are well suited for clear coats, so the abrasive continues to cut without loading as quickly, supporting smoother finish sanding on coated panels. The same anti-clogging behavior extends to composites, mineral, and solid surfaces, helping maintain productivity when leveling or refining these dense materials. Granat is Festool's longest lasting and highest performing abrasive and is well suited for nearly all applications specified, so one abrasive family can move from stock preparation through finer finishing on those materials. The disc is designed for use on bare wood, allowing it to handle final sanding passes before coating in cabinet, furniture, or millwork production. It is also specified for paints and most modern paint systems, so refinishing and paint preparation work can rely on a known 500 grit step. Use on VOC clear coats gives the disc a role in shops working with these coating systems, where controlled, fine abrasion is important. The disc also works on plastic materials, acrylics, solid surface materials, and composites, extending use into fixture, display, and surface-fabrication tasks that share the same abrasive setup.
The 500 grit rating provides a fine scratch pattern that supports smooth finishes on the listed materials, which is important when the goal is to minimize visible sanding marks under clear or high-sheen coatings. Because Granat is Festool's longest lasting and highest performing abrasive, each disc is designed to hold its cutting ability through extended use, which reduces the number of disc changes during repetitive work across multiple panels. The anti-clogging properties limit how quickly dust and coating residue build in the abrasive matrix, so the working surface stays cleaner and maintains a more even cut. Using a disc that is well suited for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites allows the same abrasive series to move through varied material stacks in one shop. The Multi-Jetstream II format integrates with sanding systems built around that interface, coordinating the disc with dust extraction and pad design where it is used. Hook and loop backing supports quick disc swap-out as grit changes are needed, so the sanding sequence can progress without extended downtime between stages.
The disc is specified for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, so it covers a wide range of shop substrates.
The 500 grit Festool Granat disc serves as a fine sanding step, refining surfaces after coarser grits to prepare coated and solid surfaces for subsequent finishing processes.
The disc's anti-clogging properties help the abrasive stay open on clear coats, composites, mineral, and solid surfaces, maintaining cutting performance instead of loading rapidly.
Granat being Festool's longest lasting and highest performing abrasive means each disc is designed to keep cutting effectively over more work, reducing abrasive changes.
The hook and loop backing lets the disc attach and remove from compatible pads quickly, which streamlines grit changes and keeps workflows moving between sanding steps.
The Multi-Jetstream II design aligns the disc with sanding systems using that pattern, supporting dust extraction performance where that interface is part of the setup.
This Festool Granat 6 inch 500 grit hardened aluminum oxide sanding disc from Wurth Baer Supply combines fine-cut capability with anti-clogging behavior across the listed materials. By using Granat, Festool's longest lasting and highest performing abrasive, a shop can standardize on a 500 grit step that works on bare wood, coatings, and specified solid surfaces. The Multi-Jetstream II format and hook and loop backing align with compatible sanding systems, supporting quick changeovers and efficient dust control where those platforms are installed. For operations moving between clear coats, paints, plastics, and solid surface materials, this disc provides a consistent fine-sanding option tied to manufacturer-verified applications.
Sold In: 1 Box