Festool Granat 6 inch sanding disc is a hardened aluminum oxide abrasive disc designed for a broad range of finishing and prep tasks. The hardened aluminum oxide grain cuts consistently, so surfaces on wood, paints, and plastics are refined with controlled, predictable scratch patterns. The 6 inch disc size matches common random orbit sanders, helping cover more area per pass on wide panels and solid surface work. The 1,200 grit rating produces a very fine finish, which is useful when preparing clear coats and modern paint systems for polishing or final coats. The disc is built as part of Festool's Granat line, which is described as their longest lasting and highest performing abrasive, so each disc is intended to stay effective across extended sanding passes. Multi-Jetstream II design in the disc works with compatible sanders to support efficient dust extraction, helping keep the abrasive face clearer during use.
This Granat abrasive disc is identified as a 6 inch disc, so it is sized for sanders designed to run 6 inch hook and loop-backed abrasives. The hook and loop backing presses onto a matching pad, letting you align the abrasive and reuse it as needed during multi-step sanding progressions. The Multi-Jetstream II designation ties the disc to a hole layout that works with Multi-Jetstream II sanding pads, supporting integrated dust movement through the pad and disc. This airflow path pulls sanding dust away from the cutting surface, which helps the anti-clogging design maintain a clearer abrasive face on clear coats, solid surface, and composite materials. The precise interface between hook and loop backing and pad surface keeps the disc stable while the sander is in motion.
The 575176 Granat abrasive disc is described as well-suited for clear coats, composites, mineral and solid surfaces, so it fills finishing steps where fine control is needed. On VOC clear coats and most modern paint systems, the 1,200 grit cut allows you to level minor surface defects while leaving a smooth, uniform profile ready for polishing or subsequent coats. The same fine grit helps when refining acrylics and plastic materials because the hardened aluminum oxide grain creates an even scratch pattern that supports clear, consistent appearance. On solid surface materials, the disc can be used as part of a progression leading toward a finished sheen, with the anti-clogging properties helping the abrasive keep cutting even as fine dust is generated. Because the disc is also suitable for bare wood, it can perform delicate final passes where a very fine surface is needed before applying finishes.
The Granat line is described as Festool's longest lasting and highest performing abrasive, and that emphasis on longevity supports stable results over multiple passes. As the hardened aluminum oxide grain wears, it continues to cut in a controlled way, which helps maintain consistent finish quality from part to part. Anti-clogging behavior becomes important in workflows that involve clear coats, composites, and solid surface, because a disc that resists loading stays closer to its intended cutting performance and reduces the tendency for random scratches from built-up debris. The Multi-Jetstream II design, working with a compatible pad, channels dust away from the surface while you sand, helping the abrasive contact remain clean and allowing the 1,200 grit to refine instead of skating over accumulated dust. Hook and loop attachment allows quick disc changes as you step through other Granat grits, so you can maintain a reliable progression from shaping through final finishing using a familiar abrasive family.
The Festool Granat 6 inch sanding disc is described for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, so it supports varied shop and jobsite materials.
The Granat 1200 grit sanding disc cuts very finely, so it is suited to refining clear coats, modern paint systems, acrylics, and plastics when you want a smooth surface prepared for polishing or later finishing steps.
The hardened aluminum oxide construction provides a sharp, durable abrasive surface, so the disc can maintain cutting performance across bare wood, paints, plastics, and solid surface materials during extended sanding passes.
The Granat sanding disc anti-clogging properties help reduce loading on clear coats, composites, and solid surface materials, so the abrasive face stays more open and continues to cut uniformly during fine finishing tasks.
The Festool Multi-Jetstream II disc layout works with matching pads to move dust away from the sanding area, helping the Granat abrasive maintain cleaner cutting and supporting a more consistent fine finish.
The hook and loop sanding disc backing allows quick attachment and removal on compatible pads, supporting fast grit changes and repeated use during multi-step sanding workflows on wood, paints, and solid surfaces.
Choosing the Festool Granat 6 inch sanding disc in 1,200 grit P1200 lets you apply one abrasive family across clear coats, bare wood, plastic materials, acrylics, composites, and solid surface materials. The hardened aluminum oxide grain, anti-clogging behavior, and Multi-Jetstream II dust movement combine to keep the abrasive working efficiently as you refine surfaces. At Wurth Baer Supply, this disc is identified by manufacturer part number 575176, so it can be specified consistently whenever your work calls for very fine Granat finishing passes.
Sold In: 1 Box