Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Zephyr pull is a 3-3/4 inch (96 mm) center to center cabinet pull that provides a consistent grip point across doors and drawers, which matters when you are lining up multiple fronts in a run of cabinets. The stainless steel finish gives the zinc pull a clean, neutral look that coordinates with a wide range of hinges and appliances, simplifying finish choices on a mixed-hardware job. The pull length of 4-9/16 inches leaves a little over 3/8 inch of metal beyond each screw hole, which helps visually cover minor layout variances at the drilling line. A projection of 1-1/8 inches creates space for fingers behind the pull, which supports comfortable use on frequently opened base and wall cabinets. The Zephyr series design delivers a rounded profile, which reduces sharp edges around busy work areas.
The 96 mm center to center layout matches a common drilling standard, which lets installers reuse existing holes during a handle swap or run the same pattern across an entire job. The pull mounts through the door or drawer front at two points, which spreads the load across the front and helps it handle regular opening and closing. The overall length of 4-9/16 inches gives enough bar beyond the screws for alignment by eye, which is useful when matching sight lines across adjacent fronts. The 1-1/8 inch projection keeps the pull from feeling cramped in the hand, which supports smoother operation on deeper drawers and tall doors.
The Hickory Hardware Zephyr Series 3-3/4 inch (96 mm) center to center stainless steel pull works well anywhere a consistent, modern handle is needed across multiple cabinet types. The stainless steel finish pairs effectively with many contemporary appliances and faucets, which helps maintain a unified look from base cabinets to wall units. The zinc material underneath gives the pull a solid feel on the door or drawer front, which is useful on heavier storage pieces in kitchens, baths, or workrooms. The 13/16 inch width offers a rounded gripping surface, which supports repeated use where doors and drawers are opened throughout the day. Using the same Zephyr series profile across a project keeps the hardware line visually consistent, which simplifies layout planning when mixing different cabinet sizes.
The 96 mm center to center dimension on the P2281-SS cabinet pull aligns with standard metric drilling jigs, which helps installers drill accurate, repeatable hole patterns on both new and retrofit jobs. The 4-9/16 inch overall length gives a clear visual reference at the door or drawer edge, which aids in setting uniform reveals when aligning multiple pulls along a bank of cabinets. The 1-1/8 inch projection establishes a predictable standoff from the face, which helps maintain consistent clearance behind the pull when working with thicker door materials or applied drawer fronts. The 13/16 inch width keeps the rounded design from feeling too small in the hand, which can reduce fumbling when users grab the pull from different angles. Using the Zephyr series geometry and dimensions across a job allows installers to repeat the same drilling and alignment process, which supports faster installation and cleaner sight lines.
The P2281-SS pull has 3-3/4 inch (96 mm) center to center spacing, a 4-9/16 inch overall length, 1-1/8 inch projection, and 13/16 inch width, which guides drilling and layout on cabinet doors and drawers.
The Zephyr pull is made from zinc with a stainless steel finish, which gives a solid-feeling handle with a metal look that coordinates with many contemporary kitchen and bath fixtures.
The 96 mm center to center spacing matches a common drilling standard, which supports quick layout with standard jigs and simplifies replacing existing handles drilled on the same centers.
The Hickory Hardware Zephyr pull is designed as a handle and pull for cabinet hardware, which makes it suitable for both cabinet doors and cabinet drawers using the same mounting layout.
The P2281-SS cabinet pull is a Hickory Hardware Zephyr series product under the Belwith Keeler brand, which identifies its style family and source for coordinating decorative hardware.
The 1-1/8 inch projection holds the pull off the cabinet surface, which creates finger clearance behind the bar and supports comfortable everyday use on doors and drawers.
The Hickory Hardware Zephyr Series 3-3/4 inch (96 mm) center to center stainless steel pull P2281-SS combines a standard 96 mm drilling pattern with a 4-9/16 inch length, which makes it straightforward to align across cabinet runs. The zinc construction with stainless steel finish delivers a modern look that coordinates with other decorative hardware, which helps maintain a consistent appearance from room to room. For projects where repeatable drilling, clean sight lines, and a rounded, comfortable grip matter, this Belwith Keeler cabinet pull offers dimensions and finish that support efficient cabinet hardware installation.
Sold In: 1 Each
