Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Zephyr appliance pull is an 18 inch center to center handle designed for appliance-scale doors and large cabinet fronts. The pull belongs to the Zephyr collection, so it carries a consistent modern look across matching pieces. Its rounded pull design provides a smooth grip, which helps when operating heavier appliance panels. The material is zinc, giving a solid metal feel that supports frequent daily use in active kitchens. An oil rubbed bronze highlighted finish defines the visible surface, bringing a dark tone with lighter highlights that fit many current kitchen palettes. The overall length of 19-3/8 inches lets the pull span wide rails on appliance panels. A 2 inch projection stands the pull off the face of the door, creating ample finger room for firm grasping. The 1-1/2 inch width gives a substantial handhold, useful on tall or integrated appliance fronts.
The 18 inch center to center spacing defines the mounting points, so installers can plan boring patterns for appliance panels and large cabinet doors with confidence. With an overall length of 19-3/8 inches, the handle extends past the mounting points, which helps visually balance wide or tall fronts. The 2 inch projection sets the standoff from the surface, allowing door panels to fully operate while hands clear surrounding trim. A width of 1-1/2 inches shapes the gripping surface, supporting a full hand grasp along the bar. These dimensions work together to give an appliance pull scale that matches wider stiles and rails frequently used on panel-ready appliances. Using the stated measurements, tradespeople can coordinate drilling, panel design, and hardware alignment in advance.
This appliance pull is part of the Zephyr collection, so it suits installations where a unified decorative hardware line is preferred across a project. The 18 inch center to center measurement aligns with many appliance-scale handle layouts, supporting use on refrigerator panels, freezer panels, and other tall cabinet fronts that call for a long pull. With a 19-3/8 inch total length, the handle sits proportionally on wider faces, helping the hardware match the scale of full-height doors. The 2 inch projection keeps the gripping area out from thick panels, which is valuable when doors are built up with applied molding or panel overlays. At 1-1/2 inches wide, the pull presents a noticeable bar along the door, making it easy to locate and grab in busy kitchen settings.
The defined 18 inch center to center spacing allows repeatable boring patterns across multiple panels, which supports consistent alignment on banks of tall units. Overall length of 19-3/8 inches provides a predictable edge clearance, so installers can align handles relative to door edges and adjacent fronts. The 2 inch projection offers uniform standoff from door faces, which helps maintain a consistent reveal between panels and hardware across a run of appliances and tall cabinets. A 1-1/2 inch width gives enough bar depth for a comfortable grip while still fitting typical stile widths, aiding in keeping pulls centered on rails or stiles. As part of the Zephyr collection, this appliance pull helps maintain a coordinated appearance wherever matching Zephyr knobs or smaller pulls are used on nearby doors and drawers.
The Hickory Hardware Zephyr appliance pull has 18 inch center to center mounting, which defines the hole spacing for drilling and aligns with appliance-scale handles.
The P3008-OBH appliance pull measures 19-3/8 inches in overall length, giving coverage suited to tall doors and wide appliance panels.
The Zephyr collection appliance pull uses zinc material, providing a solid metal body appropriate for frequent door operation.
The appliance pull has a 2 inch projection, setting the handle off the door surface to create room for a comfortable hand grip.
This 18 inch center to center appliance pull has a width of 1-1/2 inches, providing a substantial gripping area on appliance and tall cabinet fronts.
The Zephyr series P3008-OBH uses an oil rubbed bronze highlighted finish, giving a dark base with lighter highlights for coordinated decorative hardware projects.
The Hickory Hardware Zephyr appliance pull brings an 18 inch center to center layout, 19-3/8 inch overall length, and 2 inch projection to appliance-scale doors. With zinc construction, a 1-1/2 inch width, and an oil rubbed bronze highlighted finish, it suits tall panels that need a substantial, visually coordinated pull. For projects using the Zephyr collection and calling for a long handle on larger fronts, this P3008-OBH model provides defined dimensions that support layout planning and consistent results.
Sold In: 1 Each
