Hickory Hardware Zephyr pull describes a zinc cabinet pull from the Zephyr collection designed for modern cabinet and furniture projects where a clean, rounded profile is preferred. The stainless steel finish provides a stainless steel look that matches common appliance and hinge finishes, so installers can keep a consistent visual line across a kitchen or built-in. The 5-1/16 inch (128 mm) center to center dimension aligns with a widely used drilling pattern, which helps when matching existing holes on retrofit work. Overall length of 5-7/8 inch gives enough hand clearance for drawers and doors without looking oversized on standard cabinet widths. A projection of 1-1/8 inch sets the grip off the face just enough for fingers to grab comfortably while keeping the pull tight to the front, useful on narrow walkways or tight galley runs where hardware sticking out can catch clothing.
The P2282-SS cabinet pull uses a 128 mm center to center mounting layout, so installers can base hole spacing directly on that metric dimension when setting up jigs or line-boring equipment. The 5-7/8 inch overall length keeps end clearance predictable from the mounting holes, which helps position pulls consistently relative to door and drawer edges. With a projection of 1-1/8 inch and width of 13/16 inch, the pull sits close enough to the surface that it works on cabinets near walls or appliances, yet still offers usable grip depth for everyday opening and closing. The stainless steel finish on the zinc body provides a uniform outer surface, which supports a neat look when lined up across multiple fronts in a bank of drawers or tall pantry doors.
The Hickory Hardware Zephyr pull from the Zephyr collection is positioned for cabinet and furniture fronts where a modern but simple line is desired. With its 5-1/16 inch center to center dimension, the pull fits layouts based on 128 mm drilling systems often used on kitchen cabinetry and casework, so it works on both new installations and many replacement situations that share this spacing. The 5-7/8 inch overall length suits typical base and wall cabinet doors, as well as common drawer widths, giving a handle that looks proportional without overwhelming smaller fronts. Because the pull is made from zinc with a stainless steel finish, it visually coordinates with other stainless steel finish components in the same space, which helps create a tied-together appearance across doors, drawers, and surrounding fixtures.
The 128 mm center to center measurement on this Belwith Keeler Zephyr pull provides a fixed reference for drilling, so installers can use templates or boring machines set once and repeat that setting across a whole run, reducing layout variation from cabinet to cabinet. The 1-1/8 inch projection sets a consistent stand-off from the face, which helps doors and drawers feel the same to the hand throughout a kitchen or built-in project. With a width of 13/16 inch, the rounded pull presents a clear gripping surface that stays the same wherever it is mounted, so users experience similar leverage whether they pull a tall pantry door or a shallow drawer. The stainless steel finish over the zinc material maintains a single appearance across every handle using this model, which supports a uniform look when installers line up multiple pulls on large drawer banks or paired doors.
The Hickory Hardware Zephyr pull has a 5-1/16 inch (128 mm) center to center dimension, which matches a widely used drilling pattern for cabinets and helps align with many existing hole layouts.
The P2282-SS cabinet pull has an overall length of 5-7/8 inch, giving a handle size that works well on typical cabinet doors and drawers without dominating smaller fronts.
The stainless steel finish pull projects 1-1/8 inch from the cabinet face, providing finger clearance for grip while limiting how far the handle reaches into walkways.
The Hickory Hardware Zephyr series pull is made from zinc with a stainless steel finish, pairing a solid cabinet hardware material with a neutral metallic appearance.
The cabinet pull has a width of 13/16 inch, creating a rounded gripping surface that feels substantial while still fitting comfortably on standard door and drawer rails.
The manufacturer part number for this Zephyr collection pull is P2282-SS, which identifies this specific size and stainless steel finish when ordering or matching existing hardware.
The P2282-SS Hickory Hardware Zephyr pull combines a 128 mm center to center layout, 5-7/8 inch overall length, and 1-1/8 inch projection in a zinc body with stainless steel finish, giving installers a consistent, modern handle for cabinet and furniture projects that follow this drilling pattern.
Sold In: 1 Each
