Hickory Hardware Conquest Series 3-1/4" (83 mm) Center to Center Antique Brass Pull, - P145-AB

Hickory Hardware Conquest Series Pull For Cabinets

Hickory Hardware Conquest Series pull described as a 3-1/4 inch center to center antique brass pull gives installers a defined grip point across drawer or door fronts, which helps align drilling patterns for consistent cabinet layouts. The SAP description stating 3-1/4 inch C/C in antique brass finish identifies a handle that visually ties together multiple fronts while keeping hole spacing standardized on the run. The web description listing this pull within the Cavalier collection positions it as part of a coordinated lineup, which supports matching looks across kitchens, bathrooms, or entry ways. The material specified as zinc creates a solid cabinet pull body, which supports everyday opening and closing without deforming under normal residential hand force. The finish specified as antique brass adds a warm tone on the zinc base, which helps this handle visually coordinate with traditional hinges or other brass-toned decorative hardware.

Key Details That Support Cabinet Projects

• The center to center dimension of 3-1/4 inches sets the drilling distance between mounting holes, which helps installers lay out repeatable hole patterns across banks of doors or drawers without refiguring measurements on each piece.
• The listed length of 5 inches provides additional bar span beyond the 3-1/4 inch mounting points, which gives fingers more surface to grab and can bridge wider rail sections on cabinet faces during daily use.
• The projection of 13/16 inch specifies how far the pull stands off the cabinet face, which affects knuckle clearance and helps avoid hands brushing against door surfaces during operation.
• The width of 1-1/8 inches defines the front profile of the handle, which influences how the pull feels in the hand and how it visually scales on narrower or wider cabinet rails.
• The noted finish as antique brass sets both color and sheen on the zinc body, which supports tying this pull into brass-toned hinges, knobs, or other decorative hardware on the same project.

Installation Dimensions And Handle Layout

The center to center measurement of 3-1/4 inches provides the core layout dimension during installation, because this distance controls where to bore mounting holes along the cabinet face. The overall 5 inch length then defines how far the handle will extend past those hole locations toward each end, which matters when balancing the pull visually on door rails or drawer fronts. The projection of 13/16 inch dictates the standoff from the cabinet, shaping both hand clearance and how far the profile will protrude into the room. The 1-1/8 inch width contributes to the front footprint of the pull, which impacts how it sits between stile edges or trim details and how the hardware reads from a distance.

Using This Antique Brass Pull In Projects

Where This 3-1/4 Inch C-C Pull Fits

The web description places this handle within the Cavalier collection from Hickory Hardware, which positions the pull for use on kitchens, bathrooms, or entry ways where coordinated decorative hardware is desired across multiple openings. The 3-1/4 inch center to center dimension points to cabinets or furniture pieces laid out around that hole spacing, so runs of doors or drawers can share the same drilling pattern. The antique brass finish called out in the description suits projects targeting a warm, traditional appearance, allowing the pull to work alongside other brass-colored decorative hardware. The 5 inch overall length gives the handle enough span to sit proportionally on standard cabinet doors or medium-width drawers, so it does not appear undersized on most residential casework.

Why These Dimensions Support Repeatable Results

The consistent 3-1/4 inch C/C specification helps installers standardize jigs or drilling templates, which can streamline production when hardware is repeated across a job. The combination of 5 inch length and 1-1/8 inch width defines a predictable front footprint, which supports layout decisions about hardware placement relative to door rails and stile edges. The projection of 13/16 inch creates a known clearance off the face, which helps cabinet makers anticipate how the pull interacts with nearby trim, adjacent doors, or appliance panels. The zinc material listed in the web description provides a stable base metal, which keeps the handle body solid under typical daily operation on residential doors and drawers. The antique brass finish, applied to that zinc base, offers a consistent color reference, which is useful when coordinating multiple pulls across a room or tying this handle to other brass-finished decorative hardware from Belwith Keeler.

Common Questions About This Cabinet Pull

Selecting This Pull For Cabinet Hardware Runs

The Hickory Hardware Conquest Series pull described as a 3-1/4 inch center to center antique brass pull combines a defined drilling dimension with a 5 inch overall length, which supports consistent layouts on doors and drawers. The zinc construction with antique brass finish ties function and appearance together, making it suitable where a warm metallic tone is desired across multiple openings. For projects that align with the 3-1/4 inch C/C layout and the Cavalier collection style, this Belwith Keeler cabinet pull from Wurth Baer Supply offers a clearly specified option.