Hickory Hardware 12 inch drawer slide defines this P1750/12-W side mount drawer slide as a 12 inch long, Euro style unit designed for standard drawer applications. The 3/4 extension travel lets the drawer open far enough for regular access while keeping part of the slide engaged for support. The self-close function pulls the drawer fully shut at the end of travel, which helps drawers sit consistently closed in day-to-day use. Its roller and polyslide design creates a guided motion path along the slide, which supports smooth operation under typical cabinet loads. The single captive roller keeps the drawer aligned in the track, which helps reduce side play during opening and closing. As a side mount drawer slide, it works along the drawer sides rather than underneath, which keeps the slide action accessible during installation and later adjustment within the cabinet.
This side mount drawer slide mounts along the drawer sides, which sets up a familiar layout for many cabinet builds and replacements. The 12 inch length is suited to drawers designed around that nominal depth, which helps maintain proper slide engagement through the full 3/4 extension travel. Being an unhanded slide means the same part can serve on either side of the drawer, which simplifies part selection when planning multiple drawers. The white finish gives a clean appearance in light-colored cabinet interiors, which helps the hardware blend visually when drawers are open. The Euro style epoxy coated slide body is designed as a matched roller track, which supports repeatable movement when both cabinet and drawer members are aligned during installation.
This P1750/12-W drawer slide is part of the 1750 Series of epoxy coated Euro slides, which places it within a line intended for typical drawer applications requiring guided roller movement. The 12 inch length fits drawer boxes built around that depth, which suits smaller to mid-depth cabinet drawers in kitchens, baths, or utility areas designed for similar slide lengths. The 75 lb capacity aligns with drawers holding common stored items rather than extremely heavy loads, which fits many residential and light-duty commercial cabinets. Its white finish pairs naturally with cabinets using light interiors, which helps maintain a consistent visual look when drawers are open in those installations. Because it is a side mount design, it is suited to cabinet cases built for side clearance between the drawer box and the interior wall, which matches standard Euro slide layouts in many frameless and framed cabinet designs.
The 3/4 extension travel engages enough of the slide length inside the cabinet while allowing most of the drawer to move out, which supports stable operation by keeping overlapping members engaged under load. The self-close action at the end of travel adds a firm closing pull, which helps keep drawers seated against the cabinet front rather than drifting partway open between uses. The roller and polyslide mechanism concentrates movement on a rolling contact area, which helps the slide cycle through repeated openings with controlled friction along the coated track. The single captive roller runs within a constrained channel, which helps maintain drawer alignment from front to back and can reduce racking in normal operation when both sides are installed evenly. The Euro style epoxy coated construction gives the track a treated surface, which supports smooth roller motion and can ease the opening effort across the 3/4 extension range. Together, these design choices support consistent drawer action for cabinets set up around this specific 12 inch, side mount format.
The P1750/12-W is a 12 inch 3/4 extension self-close epoxy coated Euro style side mount drawer slide, which defines how it mounts and how far the drawer travels.
This drawer slide is rated to store items up to 75 lb, which aligns it with drawers handling typical household or light commercial contents rather than very heavy loads.
This Hickory Hardware slide offers 3/4 extension, which allows most of the drawer box to open while leaving part of the slide engaged in the cabinet for support.
The P1750/12-W is unhanded, which means the same slide model can be used on either the left or right side of a drawer installation.
This Euro drawer slide is a side mount design, which positions the slide members along the drawer sides inside the cabinet opening.
This 12 inch drawer slide has a white finish over its epoxy coated body, which presents a clean appearance inside light-colored cabinet interiors.
The 12 inch length, 3/4 extension travel, and 75 lb rating position this Belwith Keeler P1750/12-W slide as a practical choice for standard-depth drawers carrying everyday loads. The side mount, unhanded Euro design simplifies planning across multiple cabinet openings that share the same layout. When a white, epoxy coated roller and polyslide system matches your project requirements, this Hickory Hardware 12 inch drawer slide offers a consistent format to build around for your next run of drawers.
Sold In: 1 Each
