Hickory Hardware 1750 24" Self-Close Side Mount 3/4 Extension 75 lb Epoxy Coated Euro Slide, White, P1750/24-W

Maximum Length, Minimal Hardware: The 24 Inch White Epoxy Euro Slide

The Hickory Hardware 1750 Series 24 inch Euro slide is an epoxy-coated, self-closing roller slide in white, side-mounted and unhanded, designed for full-depth kitchen, closet, and cabinetry drawers where 24 inches of slide length is the right fit.

Key Features

• 24 inch length — the longest standard Euro slide length in the 1750 series, suited to full-depth base cabinet drawers.
• Self-closing ramp — push the drawer to within range and the slide pulls it fully shut without a damper.
• 3/4 extension — the drawer opens most of its length, leaving the rear portion inside the cabinet at full travel.
• Non-handed design — the same part works on both sides of the drawer, so there is no left or right to sort.
• White epoxy powder-coat — blends with white melamine and paint-grade cabinet interiors.
• 75 lb load rating per pair — standard-duty capacity for everyday kitchen and closet drawers.

Where the 24 Inch Length Earns Its Place

A 24 inch Euro slide belongs in full-depth base cabinets and pantry pullouts where shallower lengths leave wasted space at the back. Utensil drawers, linen closet drawers, and large vanity bases all benefit from matching the slide length to the full cabinet depth rather than stepping down to a shorter size. The 3/4 extension means the drawer opens generously — most of its contents are reachable — but the rearmost few inches stay inside the cabinet at full travel, which is normal behavior for this extension class and not a defect.

This is a side-mount configuration, so the slide is visible on the interior when the drawer is open. That is typical for Euro roller slides and perfectly appropriate for production cabinetry, closet systems, and vanities where the interior finish is melamine or paint-grade wood.

Steel and Epoxy Built for the Cabinet Interior

The 1750 Series slide is formed steel with a white epoxy powder-coat finish. The epoxy is a color finish, not a corrosion-barrier upgrade — it is designed to match white cabinet interiors and disappear visually against the panel. Nylon roller bearings carry the drawer smoothly and quietly across the full travel. These are indoor cabinet slides; the epoxy finish is not rated for humid, wet, or exterior environments.

Right for Production Shops and Single-Project Installers

The unhanded design simplifies ordering: one part number covers both sides of the drawer, which reduces inventory complexity for shops running multiple cabinet lines. The 24 inch length specifically suits standard North American base cabinet depths, so it fits naturally into a production workflow without custom trimming or shimming. Homeowners replacing worn slides in existing full-depth base cabinets will find the 24 inch size a direct match for the most common kitchen cabinet depth. The 75 lb per pair rating handles cookware drawers, mixed kitchen contents, and bedroom or closet drawers without issue.

The Right Slide for Full-Depth Cabinetry

When the drawer depth calls for 24 inches and the finish calls for white, the 1750 Series delivers a self-closing, side-mount Euro slide that fits the opening, blends with the interior, and closes reliably every time.