Hickory Hardware 1750 14" Self-Close Side Mount 3/4 Extension 75 lb Epoxy Coated Euro Slide, White, P1750/14-W

14 Inch Euro Slide For Shallow Cabinet Drawers

The Hickory Hardware 1750 Series 14 inch epoxy-coated Euro slide is a steel, roller-bearing, side-mount slide with 3/4 extension and a self-closing ramp, finished in white epoxy. It is built for the shorter drawer runs found in bathroom vanities, narrow base cabinets, island drawers, and upper-cabinet pull-outs where a longer slide simply will not fit.

Key Features

• 14 inch length — sized for shallow drawer openings where standard 18 or 22 inch slides are too long to install.
• Self-closing ramp — pulls the drawer fully shut once it is pushed into the capture zone, with no additional mechanism needed.
• 3/4 extension — the standard Euro travel class; the drawer opens most of its length, with the rear portion remaining inside the cabinet.
• Non-handed design — the same part works on both the left and right side of the drawer, so there is nothing to match up when ordering.
• White epoxy powder-coat finish — blends with white melamine and painted cabinet interiors so the slide stays visually quiet when the drawer is open.
• 75 lb load rating, roller-bearing steel construction — delivers dependable everyday performance for standard cabinet drawer loads.

Where the 14 Inch Length Earns Its Place

Most Euro slide ranges lead with 18 and 22 inch lengths because those cover the majority of kitchen base cabinet depths. The 14 inch size serves the jobs those longer slides cannot reach: a bathroom vanity with a 13 or 14 inch interior depth, an island drawer bank built into a peninsula, a narrow upper cabinet with a pull-out tray, or a small accent piece where the drawer box is only 12 to 13 inches deep. Side clearance is 1/2 inch per side, so build the drawer box 1 inch narrower than the cabinet opening and the slide drops straight in.

Finish and Construction

The 1750 Series slide is formed from steel and finished in a white epoxy powder coat — the same coating used across the Euro slide category to protect the metal and match the interior of painted or white-laminated cabinets. Nylon roller bearings carry the drawer load quietly along the steel tracks. This is an indoor cabinet slide; the epoxy finish is not rated for wet or exterior exposure.

Who Reaches for This Slide

Cabinet shops fitting vanity drawers and small accent pieces order this length in volume precisely because it handles the shorter runs their 18 inch inventory cannot. Contractors reworking a bathroom or a prep kitchen appreciate the unhanded design — no separate left and right part numbers to manage on a tight job. Homeowners tackling a DIY vanity build or a small island project get a clean white finish that looks intentional rather than utilitarian when the drawer is open. At 75 lb capacity, the slide handles everyday loads in all of these settings without being oversized for the application.

The Right Slide for a Short Run

When the drawer depth calls for 14 inches and nothing longer will clear the cabinet back, the 1750 Series delivers a clean white finish, a self-closing ramp, and a non-handed design that keeps the install simple from the first measurement to the last screw.