Belwith Keeler satin nickel pull from the Project Pack Series is a Contemporary pull designed for cabinet and furniture jobs where a consistent look is required across multiple openings. The pull is made of zinc, which provides a solid metal feel during everyday use in kitchens, baths, and shop-built casework. Its satin nickel finish creates a muted metallic surface that helps visually coordinate with common satin nickel hinges and other decorative hardware. The pull length is 4 inches, so it spans enough area on the door or drawer front to give a comfortable grip. With a projection of 1 inch, the pull stands off the surface enough for fingers to wrap behind it during operation. The width of 1/2 inch keeps the profile slim on narrow drawer fronts while still giving a clear visual line.
The center-to-center dimension of 3 inches to 3-1/4 inches defines how this Belwith Keeler satin nickel pull aligns with bored holes on cabinet fronts. That range allows the pull to address installations where the hole spacing fits within this measurement window during cabinet construction or replacement. With a 1 inch projection, the pull extends from the cabinet face enough to allow users to grasp it without their fingers scraping the surface, which can be helpful on thicker door profiles or heavy-use drawers. The 1/2 inch width keeps the footprint narrow on the mounting face, which can be beneficial when positioning multiple pulls on smaller drawer fronts or tight rail heights. Overall length of 4 inches provides visual balance on standard cabinet door and drawer widths, supporting clean sightlines in installed runs.
This Project Pack Series satin nickel pull is described as an economy pack of Contemporary pulls, which makes it suited to projects where multiple matching pulls are required, such as full kitchen runs, bath vanities, or commercial casework. As a zinc pull with a satin nickel finish, it supports installations that need a consistent metallic tone across many doors and drawers in residential or light commercial environments. The pull belongs to the Decorative Hardware & Moldings category under Handles and Pulls, so it fits into workflows where installers are selecting visible hardware to finish cabinet boxes, face frames, and fronts. The Belwith classification in Handles and Pulls, Belwith connects this pull to a recognized decorative hardware line, which can be useful when coordinating with other components from the same brand family on a job.
The 3 inch to 3-1/4 inch center-to-center spacing is central to how this VP3447-SN cabinet pull supports both new layouts and replacements. This measurement defines the drilling pattern on the door or drawer front, which directly affects jig settings and boring templates during production or onsite work. Because the center-to-center falls within a common small-span range, it can match many existing 3 inch boring patterns when replacing older pulls that share similar spacing. The 4 inch length provides some coverage around the mounting holes, which can help visually mask minor variations in hole placement along the center line. A projection of 1 inch maintains a consistent stand-off from the surface across multiple cabinets, so hand clearance feels the same as users move along a bank of doors or drawers. The satin nickel finish ties each pull together visually, which keeps completed installations looking uniform from one opening to the next.
The VP3447-SN pull is a Belwith Keeler Project Pack Series Contemporary pull in the Handles and Pulls category, so it functions as visible decorative hardware for cabinet and furniture fronts.
This satin nickel cabinet handle pull has a center-to-center range of 3 inches to 3-1/4 inches, which defines the spacing between mounting holes on the cabinet face for layout and drilling.
The Project Pack Series satin nickel pull has a 4 inch overall length, which gives enough bar length for a comfortable grip on typical cabinet doors and drawers.
This zinc satin nickel cabinet hardware pull projects 1 inch from the surface and has a 1/2 inch width, balancing finger clearance with a slim profile on the cabinet front.
The VP3447-SN cabinet pull is made of zinc with a satin nickel finish, combining a metal body with a muted nickel appearance for decorative cabinet applications.
The Contemporary style of this Belwith Keeler satin nickel pull pairs well with modern and transitional cabinetry, supporting consistent visual lines across full-room or multi-unit installations.
The Project Pack Series, zinc 3 inch to 3-1/4 inch center-to-center satin nickel pull from Belwith Keeler brings a Contemporary style, defined dimensions, and a satin nickel finish to cabinet and furniture work. Its 4 inch length, 1 inch projection, and 1/2 inch width create a predictable footprint on doors and drawers that supports consistent layouts. By using this VP3447-SN cabinet pull across your runs, installations gain a uniform look and repeatable hand feel from one opening to the next on your next project.
Sold In: 1 Package
