Hickory Hardware Conquest 3 inch pull is a zinc cabinet handle finished in oil rubbed bronze highlighted, so it gives doors and drawers a consistent, coordinated look across a job. The pull comes from the Conquest collection, which provides a simplistic design that works across many home styles and lets surrounding millwork and fronts stand out. Its soft lines and curves create a smooth gripping surface, which helps hands find a comfortable hold when opening cabinet doors or drawers repeatedly. The center to center dimension of 3 inches (76 mm) defines the hole spacing, so it matches standard 3 inch layouts commonly used in face frame and frameless cabinetry. With a length of 5 inches, the pull spans enough width to balance most cabinet fronts visually, which supports layout consistency on banks of doors and drawers.
The 3 inch (76 mm) center to center measurement defines the two-bore spacing, so jigs and drilling templates can be set once and run across multiple fronts without adjustment. A 5 inch overall length means the pull extends beyond the mounting holes on both sides, which affects where it lands relative to panel edges and neighboring hardware when laying out a line of fronts. The 1 inch projection positions the gripping surface off the face of the cabinet, which influences clearance near adjacent doors, walls, or appliance panels. With a width of 11/16 inch, the pull fits comfortably on narrow rails, which helps when working with smaller doors or lighter drawer fronts where wider hardware might crowd the design.
The Conquest collection design keeps the pull simplistic, so it works on a range of cabinet styles without dictating the overall look, which helps when coordinating across kitchens, baths, and built-ins. Its soft lines and curves add subtle shaping at the hand contact points, which supports a comfortable grip during frequent use on active doors and drawers. The oil rubbed bronze highlighted finish provides contrast on many common cabinet finishes, which helps users visually locate the pull and gives installers a predictable appearance across different rooms. Because the center to center is 3 inches (76 mm), the pull fits projects using that drilling standard, which is common on many residential cabinet lines and makes it suitable for both new installations and updates where that spacing already exists. The 5 inch overall length works across typical base and wall cabinets, which keeps proportions balanced when repeating the pull along runs of cabinets.
The zinc material used for the pull provides a stable, uniform base, which supports consistent hole alignment and seating across multiple fronts in a project pack installation. The 3 inch center to center measurement works with standard drilling patterns, which reduces layout variation when using templates or shop-built jigs on repetitive cabinet runs. With a projection of 1 inch, the pull maintains a consistent stand-off from the cabinet face, which helps installers align multiple pulls on doors and drawers so that hand clearance feels the same at every location. The 11/16 inch width keeps the footprint compact, which allows precise placement along frame members or slab fronts without covering too much of the surface. Originating from the Conquest collection, the pull carries the same simplistic design language as other pieces in that group, which supports visual continuity when the same style is repeated across several rooms or zones.
The VP14444-OBH is a Hickory Hardware Conquest collection zinc pull with a 3 inch (76 mm) center to center measurement, which defines it as a cabinet handle suitable for doors and drawers.
This Conquest pull has an oil rubbed bronze highlighted finish, which gives a dark base tone with highlighted areas that add contrast on many cabinet surfaces.
The pull has a 3 inch (76 mm) center to center spacing, 5 inch overall length, 1 inch projection, and 11/16 inch width, which together define drilling layout and grip clearance.
This pull uses a 3 inch (76 mm) center to center spacing, so it aligns with standard 3 inch drilling patterns commonly used on many cabinet lines.
The Conquest pull is made from zinc, which provides a uniform base material for consistent machining and finish across all pieces in a project pack.
The VP14444-OBH pull is from Belwith Keeler under the Hickory Hardware name, which identifies it within the Conquest collection and decorative hardware offering.
The Hickory Hardware Conquest 3 inch pull combines a 3 inch (76 mm) center to center spacing, zinc construction, and an oil rubbed bronze highlighted finish, which suits projects built around that drilling pattern and visual tone. Its 5 inch overall length, 1 inch projection, and 11/16 inch width give clear layout dimensions, which supports repeatable placement on doors and drawers. For cabinet runs calling for the Conquest collection look with a standard 3 inch hole pattern, this VP14444-OBH pull provides the defined measurements and finish needed to plan and execute the installation.
Sold In: 1 Package
