Rev-A-Shelf 53WC 11" Metallic Silver Bottom Mount Waste Pullout with 1-50 Quart Silver Bin Soft-Close, RS53WC-1550SCDM117

Rev-A-Shelf 53WC Waste Pullout Built for a Clean, Silver Kitchen

This Rev-A-Shelf 53WC waste pullout conceals a 50 quart silver bin inside an 11-inch base cabinet, rolling fully out on a soft-close slide system so trash and recycling stay out of view until you need them.

Key Features

• Metallic Silver powder-coat finish coordinates with stainless appliances and silver cabinet hardware for a cohesive look inside the cabinet.
• 50 quart silver bin included gives generous daily capacity in a single-bin configuration.
• Soft-close full-extension slides bring the bin all the way out and ease it back in without slamming.
• 90 pound weight capacity keeps the carriage stable even when the bin is full.
• Bottom-mount design fastens to the cabinet floor for a clean install without side-wall hardware.
• Door-mount compatible so the pullout can travel with the cabinet door when a door-mount bracket is added.

A Pullout Sized for a Full Day of Waste

The 50 quart bin is the right size for a busy kitchen that generates real volume between emptying runs. Because the carriage extends fully, the entire bin comes out of the cabinet in one motion, so grabbing a bag or dropping in a liner is straightforward. The soft-close slides handle the return quietly, which matters in an open kitchen or a space where cabinet noise carries.

Minimum cabinet opening requirements are 11-1/4 inches wide, 22-3/32 inches deep, and 23-1/4 inches tall. Measure the clear interior opening on all three axes before ordering, since the bin's 50 quart volume requires the full depth and height the specs describe.

Finish, Construction, and Motion

The 53WC carriage is finished in Metallic Silver, a powder-coat that holds up to regular use and sits naturally alongside stainless steel appliances, chrome pulls, or silver cabinet hardware. The silver bin matches the carriage, so the interior of the cabinet reads as a coordinated unit rather than mismatched parts. The bottom-mount slide system attaches to the cabinet floor, leaving the side walls clear, and the 90 pound weight rating means the unit stays controlled at full load. If you want the bin to roll out when the door opens, a door-mount bracket connects the carriage to the door face. The bracket is sold separately in the 53WC series.

Where This Pullout Belongs

This is a strong choice for a kitchen remodel or new build where the hardware palette runs silver, chrome, or stainless, and the design intent is for the inside of the cabinet to match the outside. Cabinet shops and contractors specifying waste management across multiple base cabinets will find the 53WC series consistent in sizing and install method. The single-bin configuration suits a dedicated trash or recycling station; for a split trash-and-recycling setup in the same cabinet, a double-bin carriage is the better fit.

Frequently Asked Questions

A Silver Finish That Works as Hard as the Hardware Around It

This 53WC pullout keeps a large-capacity silver bin behind the cabinet door, on controlled soft-close slides, in a finish built to coordinate with a stainless and silver kitchen palette.