212 Medium-Duty Invisible 180˚ Opening Hinge, Satin Chrome

Soss 212 Medium-Duty Invisible Hinge Function

Soss 212 medium-duty invisible hinge is a laminated-link hinge that delivers a concealed swing point for projects where a visible hinge butt is not needed. The hinge is made of laminated links, so its pivoting sections share the load through multiple plates, which matters when doors or panels cycle repeatedly in commercial or shop environments. The hinge is fully anchored in a deep mortise, putting the working mechanism inside the wood instead of on the surface, which allows clean edges and helps the hinge resist side loading at the jamb. The hinge is made of zinc die cast with steel links, combining a rigid body with tougher internal linkages, which supports medium-duty use where both alignment and strength are important. A satin chrome finish on the hinge presents a neutral metallic look at exposed edges, which suits many cabinetry and fixture styles.

Key Working Details Of This Invisible Hinge

• The hinge is made of laminated links, which creates multiple bearing surfaces that share movement, helping doors swing smoothly under medium-duty use in cabinets, fixtures, or wood panels.
• The hinge is fully anchored in a deep mortise, so most of the body sits inside the material, allowing flush edges and helping the hinge resist racking forces at the opening.
• The hinge is made of zinc die cast with steel links, combining a stable casting with stronger moving members for repeated opening cycles where a standard butt hinge is not desired.
• The hinge offers 180 degree opening capacity, which allows doors or panels to fold back flat against adjacent surfaces, improving access across the full opening.
• The hinge is for use when a hinge butt is not needed, providing a concealed alternative that supports uninterrupted surface design on cabinetry or architectural panels.

Deep Mortise Soss Hinge Mounting Behavior

This Soss 212 medium-duty invisible hinge is fully anchored in a deep mortise, so installation requires routing or machining a pocket that matches the hinge body. Because the hinge sits inside the workpiece, the leaf edges do not sit proud, which helps doors and frames meet with clean margins. The laminated links control the pivot as the hinge moves, so the door tracks along a defined arc instead of flexing at exposed knuckles. The 180 degree opening capacity allows the mounted door or panel to swing all the way back to a flat position relative to the jamb, which is useful on cabinets or built-ins where full-width access is important. The zinc die cast construction with steel links supports this motion by holding alignment at the mortise over many open-close cycles.

Using The 212US26D Hinge In Real Projects

Where This Soss 212 Invisible Hinge Fits Best

The Soss 212 medium-duty invisible hinge is described for use when a hinge butt is not needed, so it fits projects that call for concealed support instead of exposed hinge leaves. Because the hinge is fully anchored in a deep mortise, it suits doors, cabinet panels, or frames thick enough to accept a pocket matching the hinge body. The laminated-link construction keeps the hardware compact while still providing a controlled pivot, which works well on medium-duty doors that must look clean when closed. The 180 degree opening capacity lets these applications open wide, so cabinets, closets, or utility doors can sit back against adjacent sections while work is performed. The satin chrome finish labeled on this 212US26D hinge supports use in interiors where a muted metallic edge is appropriate when the hinge edge is visible at the mortise.

Why The Laminated Deep-Mortise Design Matters

The hinge is made of laminated links, so several plates share the bending and shear loads as the door moves, which supports better long-term alignment compared with a single-plate pivot in similar concealed layouts. Because the hinge is fully anchored in a deep mortise, more of the hinge body is embedded into the surrounding wood, which spreads operational forces into a larger area of the stile or jamb. The zinc die cast body with steel links ties a dimensionally stable casting to stronger internal movement members, which helps the hinge keep its motion path under medium-duty use. The 180 degree opening capacity adds working clearance, allowing the same door opening to handle wider cargo or equipment once installed. The satin chrome finish on the Soss hinge satin chrome model presents a consistent appearance for projects that specify this color.

Common Questions About Soss 212 Invisible Hinge Use

Selecting This Soss Hinge For Concealed Projects

The Soss 212 medium-duty invisible hinge in satin chrome combines laminated links, zinc die cast construction with steel links, a fully deep-mortised body, and 180 degree opening capacity. Those verified details define how it supports concealed doors or panels that must open flat while keeping the mechanism hidden. For projects calling for an invisible hinge solution rather than a traditional hinge butt, this 212US26D satin chrome hinge from Wurth Baer Supply aligns with that requirement and supports a clean, professional hardware layout.