Invisible Hinges SOSS Brand Hinges, 216 Series, Black

SOSS Hinge Black 216US19 For Hidden Joints

SOSS hinge black 216US19 is an invisible hinge from the Soss 216 series that hides the pivot in a deep mortise, so the hinge stays out of sight while the door operates normally. The hinge belongs to the Soss invisible hinges class, which keeps the hardware concealed when the door is closed so the installation presents a clean, uninterrupted surface. The design is described as being for use when a hinge butt is not needed, which suits jobs where exposed hinge barrels would interfere with the look or layout of the project. This 216 series hinge provides 180 degree opening capacity, so doors can lay back flat against adjacent surfaces and clear openings stay usable across the full swing. The hinge is identified as SOSS HINGE, BLACK, so the dark finish visually blends with darker substrates or shadow lines around the mortise.

Key SOSS Invisible Hinge Details For Pros

• The hinge is made of laminated links, which creates a compact, articulated pivot that folds into the mortise and keeps the movement smooth over the full swing.
• The hinge is fully anchored in a deep mortise, so the load transfers into the door and frame and the hardware stays concealed once the leaves are set flush.
• The hinge is made of zinc die cast with steel links, which combines a formed body for consistent sizing with steel linkages to handle repeated opening and closing.
• The hinge has 180 degree opening capacity, allowing doors or panels to open wide so the clear opening matches the frame width in many layouts.
• The manufacturer classifies this product as an invisible hinge, which supports projects that call for hidden hardware rather than exposed hinge butts along the edge.

216 Series Invisible Hinge Mortise And Swing Use

The SOSS brand 216 series invisible hinge installs in a deep mortise, so the installer removes material from both the door and the frame to house the hinge body within the thickness. Because the hinge is fully anchored in that mortise, the leaves sit flush with the surrounding wood or panel surface and the hardware does not project beyond the edge when the door is closed. The description notes this hinge is for use when a hinge butt is not needed, which ties it to layouts where the visual line of the door and frame must stay clear of protruding knuckles. With 180 degree opening capacity documented, the hinge permits full swing from closed to fully open so the door can rest flat relative to the jamb or case end.

Invisible Hinge Use And 216 Series Job Fit

Where This SOSS Invisible Hinge Is Applied

The product sits in the Hinges | Invisible and Recessed Hinges category, placing the 216 series in work where the pivot mechanism must recess into the edge rather than sit on the surface. Because the hinge is made of laminated links, the moving sections nest within the mortise and allow the door to travel from closed to 180 degrees without an exposed barrel, which suits cabinetry, architectural panels, or similar work where the visual design carries across the joint. The reference to use when a hinge butt is not needed indicates jobs where a traditional surface-mounted butt hinge would conflict with reveal lines or edge treatments, so a fully recessed pattern becomes the practical choice to preserve those details and maintain a smooth perimeter.

Why 216US19 Details Support Repeatable Installs

The manufacturer part number 216US19 identifies a specific SOSS hinge variant, giving installers a repeatable reference when matching hinges across multiple openings or coordinating with shop drawings. The hinge being fully anchored in a deep mortise means each installation follows a defined pocket depth and outline, which supports consistent alignment from opening to opening once a template or jig is set up. Laminated links within the hinge guide the motion along a fixed path, so when the mortises are located accurately the door edge tracks predictably through the swing and maintains even gaps along the frame side. The zinc die cast body with steel links combines a uniform casting for reliable mortise fit with steel link components that carry the pivot loads, which helps maintain the hinge geometry over repeated cycles. The 180 degree opening capacity gives designers a known swing range when laying out nearby cabinets or trim, so the door motion can be planned around adjacent components without unexpected binding. The SOSS HINGE, BLACK description ties the color directly to the part, so field crews can match this black finish hinge to darker door edges or shadowed reveals on the job.

Common Questions On SOSS 216 Series Black Hinge

Select The 216US19 Hinge For Concealed Swing

The SOSS brand 216 series black hinge provides invisible hinge function with laminated links, a deep mortise installation, and 180 degree opening capacity, so it supports clean-lined door and panel work where exposed hinge butts are not desired. The zinc die cast body with steel links delivers a defined geometry that pairs well with repeatable mortising setups across multiple openings. For projects calling for an invisible hinge in black finish identified by part number 216US19, this hinge from Wurth Baer Supply aligns the documented features with concealed swing requirements.