Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top hinge opens full overlay doors to 155 degrees on both face-frame and frameless cabinets, with BLUMOTION soft-close and a zero-protrusion arm profile that keeps the hinge flush with the cabinet face when the door swings wide.
A standard 110 degree hinge is the everyday choice for kitchen and bath cabinets, but certain installations call for more clearance. Corner cabinets where a door must swing back against the adjacent run, island cabinets with no wall to limit the swing, and showcase or display cases where contents need to be reached without the door blocking the opening are all places the 155 degree geometry pays off. At that angle the door sits nearly parallel to the cabinet side, giving unimpeded reach from front to back.
The zero-protrusion arm matters specifically at this wide angle. On a standard hinge, the arm projects past the cabinet face as the door swings out. At 155 degrees that projection is significant enough to catch hands, adjacent doors, or adjacent furniture. The zero-protrusion design keeps the arm profile flush so the wide swing is clean and unobstructed. The 35mm cup bores into the back of the door, and the hinge screws directly to a base plate on the cabinet, ordered separately.
The hinge body is steel with a nickel plating. Nickel holds up in the dry, interior conditions typical of kitchen and bath cabinetry and coordinates cleanly with brushed or polished nickel pulls, knobs, and other visible hardware. BLUMOTION soft-close is integrated into the hinge at the factory, so there is no separate damper to fit or replace. Three-way cam adjustment handles the fine work after install: height and side bring doors to an even gap, and depth seats the door face correctly against the cabinet front.
This hinge suits cabinet shops, finish carpenters, and kitchen designers who are specifying wide-angle access on a face-frame or frameless box and want a quiet, controlled close at the full swing. Screw-on mounting is the right call where clip-on plates are not in the plan or where a firm, fixed connection is preferred over a quick-disconnect arm. It works on standard doors 16 to 22mm thick; doors over 22mm need a thick-door hinge. A matching Blum base plate is required and sold separately. Use Blum plates only, since plate geometry and arm engagement are brand-specific.
Yes, this one does. BLUMOTION soft-close is integrated and damps the door over the final degrees of closing. Note that 155 degrees is the widest opening angle at which Blum offers integrated soft-close. The 170 degree hinge does not include soft-close.
On a standard hinge, the arm extends past the cabinet face as the door opens wide. Zero protrusion means the arm profile stays flush with the cabinet face even at the full 155 degree swing, so there is no hardware projecting outward to catch hands, adjacent doors, or furniture.
Yes. The hinge screws to a Blum base plate that mounts to the cabinet side or face-frame stile. The plate is sold separately. Use a Blum plate matched to your cabinet construction, since plates are not interchangeable across brands.
Both. The hinge works on frameless cabinets with the plate screwed to the side panel and on face-frame cabinets with the plate fastened to the stile. The plate you select determines the mounting approach.
Specify this hinge when the job calls for a full overlay door that swings open to near-flat, closes without a slam, and leaves no hardware projecting past the cabinet face at the wide angle.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP70T7553 Mfr# 70T7553 | Blum 110° Hinge Angle Restriction Clip Dust Grey 70T7553 | ||||
Sold in: 1 Each |  BP70T755309 Mfr# 70T7553.09 | Blum 155° to 92° Hinge Angle Restriction Clip 70T755309 |
