Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top hinge brings a 155 degree opening arc to full overlay doors on both face-frame and frameless cabinets, with zero-protrusion geometry, BLUMOTION soft-close, and INSERTA tool-free plate mounting, all in a nickel-plated steel build.
A 155 degree opening angle is the choice when cabinet access matters as much as the close. At full swing the door sits nearly parallel to the cabinet side, so shelves, pull-out trays, and corner cabinets are reachable without working around a door that juts into the aisle. That is the angle most useful in tight galley kitchens, accessible bath vanities, and upper cabinets above appliances where a door stopped at 110 degrees blocks the reach.
Zero protrusion adds a second layer of practicality: when the door is open, the hinge arm does not project past the cabinet face. Adjacent doors and drawers clear without hitting hardware, and the look stays clean in open-shelf or glass-front runs where the hinge is more visible. The 35mm cup bores into the door, and the arm mounts to a Blum base plate on the cabinet, ordered separately and matched to your cabinet construction.
The hinge is steel with a nickel finish. Nickel reads as a warm neutral that pairs with chrome, brushed metal, and natural wood hardware families, making it a workable choice across a range of door styles without pulling the finish palette toward a specific tone. The BLUMOTION damper is integrated into the hinge body, so there is nothing to add later and nothing to lose track of on a job site. Three-way adjustment, plus or minus 2mm on height and side and plus 3mm/minus 2mm on depth, brings doors back to a square, even reveal as a kitchen settles over time.
This hinge suits face-frame and frameless cabinets on standard doors in the 16 to 22mm thickness range. INSERTA mounting is fastest on cabinets with pre-drilled 5mm system holes: the plate presses in without screws and the hinge clips to it without tools. For a box without system holes, use the screw-on plate version instead. Designers specifying accessible kitchens, contractors on high-end kitchen remodels, and cabinet shops building display or entertainment pieces will find the 155 degree arc most useful where interior reach is a project requirement. For doors over 22mm, a thick-door hinge is the right selection, and a standard 110 degree version covers most everyday installs where wide clearance is not the priority.
At 110 degrees the door is roughly perpendicular to the cabinet face, which is fine for most kitchens. At 155 degrees the door swings nearly flat against the side, so the opening is wider and the interior is fully reachable without reaching past the door. It is most useful in tight or corner layouts and accessible designs.
On a standard hinge the arm sticks past the cabinet face when the door is open. Zero protrusion means the arm stays flush with the cabinet side at full swing, so adjacent doors and drawers open without catching on the hardware.
Yes. The hinge arm clips to a Blum base plate that mounts to the cabinet. The plate is sold separately. Match a Blum plate to your cabinet type and the overlay you need. Plates from other brands will not connect to this hinge.
INSERTA presses into pre-drilled 5mm system holes. If the cabinet does not have those holes, specify the screw-on plate version of this hinge so the plate fastens with wood screws instead.
Specify this hinge when the job calls for a full overlay door that opens completely out of the way, settles without slamming, and keeps the hardware profile flush when it does.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP70T7553 Mfr# 70T7553 | Blum 110° Hinge Angle Restriction Clip Dust Grey 70T7553 | ||||
Sold in: 1 Each |  BP70T755309 Mfr# 70T7553.09 | Blum 155° to 92° Hinge Angle Restriction Clip 70T755309 |
Sold In: 1 Each
