Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX RegulatoR electronic push button cabinet lock is a keyless lock designed for cabinet doors, drawers, lockers, and similar enclosures, so you get keypad-controlled access where a traditional key cylinder is not desired. The 7/16 inch cylinder length works with cabinet constructions that match this reach, helping the lock engage properly through the door or drawer front. A 3/4 inch diameter mounting hole gives you a clear drilling dimension, which streamlines layout when preparing panels in the shop or on site. The horizontal left hand mount configuration is intended for doors with hinges on the left when facing the door, aligning the body and keypad for that swing direction. This self-locking version uses Slamcam, a spring-loaded latching mechanism that allows users to push the door or drawer closed and have it latch without returning a knob to a locked position.
This CompX RegulatoR lock uses a horizontal left hand mount, defined by the location of the door hinges when facing the door, with left hinges calling for this version. That orientation helps the keypad and mechanism line up correctly with the hinge side on left swing doors and related enclosures. A 3/4 inch diameter mounting hole is required for installation, giving fabricators a single, clear bore size to integrate into drilling patterns. The 7/16 inch cylinder length extends through material suited to that dimension, allowing the locking cam and Slamcam mechanism to operate in the intended range when the door or drawer is closed.
The CompX National electronic push button cabinet lock is described for cabinet doors and drawers, lockers, and other similar enclosures, so it fits storage situations that benefit from keypad access instead of keyed locks. The keyless electronic push button operation lets users enter a code at the door or drawer, which can streamline access control in offices, commercial cabinets, or locker areas. Up to 20 codes per lock are supported, allowing multiple user codes or administrative codes where needed, which can be useful in shared storage setups. The satin nickel finish on this left hand RegulatoR presents a neutral metal look that works in many cabinetry and locker environments without drawing attention away from surrounding hardware.
The self-locking version featuring Slamcam uses a spring-loaded latching mechanism, so when the door or drawer is pushed closed the latch engages without returning a knob to a locked position, which can reduce steps during day-to-day use. The lock offers 75,000 cycles battery life, providing a long service interval for the AAA batteries before replacement is needed during normal operation. The AAA battery compartment is easily accessible from the outside of the cabinet, allowing battery changes without opening the cabinet through another access point. A low battery indicator is built into the lock, giving a clear signal when battery power is running down so the lock can continue to function as intended during planned maintenance. These details support consistent electronic locking performance in cabinet and locker applications that see regular opening and closing.
The CompX National electronic push button cabinet lock is described for cabinet doors, drawers, lockers, and similar enclosures, so it suits storage where keypad-controlled, keyless access is preferred.
The horizontal left hand mount is defined by hinge location when facing the door; if the hinges are on the left, this left hand version aligns the lock body with that swing direction.
The 7/16 inch cylinder length is designed for installations where the cabinet material and construction allow that length to extend through and position the locking mechanism for proper engagement.
The 3/4 inch diameter mounting hole gives a precise drilling dimension, helping fabricators create a clean, accurate bore that fits the body of the CompX RegulatoR lock.
The Slamcam spring-loaded latching mechanism allows users to push the door or drawer closed and have it latch automatically, which removes a step compared with manually returning a knob to lock.
The 20 codes per lock allow multiple access codes, while the low battery indicator signals decreasing power so the CompX RegulatoR continues operating predictably as batteries age.
The CompX RegulatoR, electronic push button cabinet lock with horizontal left hand mount, is tailored to doors with hinges on the left when facing the door, targeting that specific swing orientation. Its 7/16 inch cylinder length and 3/4 inch mounting hole size supply the core dimensions needed when laying out bores and lock positioning on cabinet doors, drawers, and lockers. The self-locking Slamcam mechanism, 20 available codes per lock, and extended 75,000 cycle battery life create an electronic solution aimed at regular access in keyless installations. For projects using satin nickel hardware and left hinged doors or similar enclosures, this REG-S-L-1 model gives a defined set of electronic locking attributes to match those requirements.
Sold In: 1 Each
