Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX RegulatoR electronic push button cabinet lock gives a keyless way to secure cabinet doors, drawers, lockers, and similar enclosures, which helps installers deliver controlled access without managing physical keys. The lock uses an electronic push button interface, so users enter a code instead of turning a key, reducing rekeying work when access changes. A self-locking version with Slamcam uses a spring-loaded latching mechanism that lets users push the door or drawer shut to lock, which speeds up daily operation in high-traffic areas. The 1-3/16 inch cylinder length allows mounting through materials up to 7/8 inch thick, so it covers many standard cabinet constructions while keeping the cylinder properly engaged. A 3/4 inch diameter mounting hole provides a straightforward bore requirement that aligns with common shop drilling setups. A satin nickel finish supplies a clean, neutral appearance that blends with many commercial and residential cabinet styles.
This CompX National electronic push button cabinet lock is described as a horizontal left hand mount, so it is set up for openings where the hinge location calls for a left hand lock when facing the door. The manufacturer notes that the location of the door hinges determines the hand of the door when facing it, and that if hinges are on the left, a left hand mount should be ordered, which ties the part directly to hinge placement on site. A maximum material thickness of 7/8 inch with a 1-3/16 inch cylinder length defines how this lock fits common cabinet doors and drawer fronts, allowing the cylinder to pass through and operate correctly. The 3/4 inch diameter mounting hole specification gives a single bore size to drill, which helps maintain consistent alignment and operation across multiple installs.
CompX National describes this RegulatoR model as a keyless, electronic push button lock for cabinet doors and drawers, lockers, and other similar enclosures, so it covers a range of storage locations in shops, offices, schools, and other built environments that use cabinets. The self-locking version with Slamcam uses a spring-loaded latching mechanism that allows the user to push to close with no need to return the knob to the locked position, which suits applications where doors or drawers are opened frequently and need to resecure automatically. Because it mounts horizontally in a left hand orientation, it pairs with layouts where the hinges are on the left when facing the door, aligning the latch function with the door swing for consistent closure. The satin nickel finish is specified for this left hand RegulatoR, giving a neutral metal appearance that coordinates with many hinge and pull finishes already used in cabinetry.
CompX RegulatoR electronic push button cabinet lock is specified with 20 codes per lock, which allows multiple authorized users or code changes over time without swapping hardware, helping maintain access control with fewer site visits. A stated 75,000 cycles battery life gives a quantitative indication of expected service before battery replacement, which supports planning for maintenance in higher-use installations. The AAA battery compartment is described as easily accessible from the outside of the cabinet, so batteries can be changed without disassembling the door or drawer, reducing labor during servicing. A low battery indicator is built into the product description, which gives users advance notice to replace AAA batteries before operation is affected, helping keep the lock functional in daily use. The keyless electronic push button interface keeps access tied to codes instead of keys, which simplifies changes when users or tenants change over the life of the cabinet installation.
The CompX RegulatoR REG-S-L-3 is a keyless, electronic push button cabinet lock for cabinet doors, drawers, lockers, and similar enclosures, so access is controlled by codes instead of traditional keys.
The self-locking version with Slamcam uses a spring-loaded latching mechanism that allows the user to push the door or drawer closed, so the lock returns to a secured state without repositioning a knob.
This CompX National lock is specified for a maximum material thickness of 7/8 inch with a 1-3/16 inch cylinder length, matching many cabinet doors and drawer fronts where through-boring is required.
The product note states that the door hinge location determines hand; when facing the door and the hinges are on the left, a left hand mount such as this REG-S-L-3 model is used.
The CompX RegulatoR REG-S-L-3 requires a 3/4 inch diameter mounting hole, so installers can rely on a single bore size when setting up drilling jigs or boring equipment.
This lock supports 20 codes per lock and specifies 75,000 cycles battery life, with an easily accessible external AAA battery compartment and a low battery indicator for straightforward maintenance.
Choosing this CompX RegulatoR electronic push button cabinet lock ties together keyless access, self-locking Slamcam latching, and a defined left hand horizontal mount, so cabinet, locker, and drawer projects gain controlled entry without adding key management. With support for 20 codes per lock, a 1-3/16 inch cylinder length matched to 7/8 inch maximum material thickness, and a 3/4 inch mounting hole, it fits many cabinet construction details while keeping installation parameters clear. For projects needing keyless control in a satin nickel finish, this REG-S-L-3 model from Wurth Baer Supply offers a focused solution.
Sold In: 1 Each
