Olympus DCN1 Pin Tumbler Cam Lock, 3/4" Material Thickness, Oil Rubbed Bronze, Keyed Alike 101 - DCN1-10B-101

Olympus DCN1 Pin Tumbler Cam Lock Use

Olympus DCN1 pin tumbler cam lock gives a keyed alike 101 cam lock solution for 3/4 material thickness, so installers can standardize cabinet security across multiple doors or panels. The lock body and cylinder are zinc die cast pin tumbler components, which provide a metal construction suited to typical woodworking and cabinet environments. The lock uses the N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, so shops using those patterns can match this lock to existing keying standards when planning projects. Standard function keeps the key removable in locked or unlocked position, which allows quick operation during frequent access applications such as cabinets or casework. The face has a 1 inch diameter that covers splintering around the bore, so installers do not need an additional trim ring to clean up the edge of the drilled hole.

Key Lock Details That Support Daily Work

• The cam lock is keyed alike to stock KA# 101, which lets multiple locks share the same key for straightforward access control in grouped installations and simplifies key management for shops and facilities.
• Keying can be matched with other N Series locks, so a facility can build a unified system across different lock types while keeping one keyway standard for service and future additions.
• The lock is easily rekeyable via a cylinder retainer clip, allowing locksmiths or millworkers to change keying without replacing the entire lock body during reconfigurations or key control updates.
• It passed ANSI/BHMA A156.11 Grade 1 performance requirements, which indicates the cam lock is tested to a recognized standard for cam lock performance in demanding hardware applications.
• It is acknowledged by the Woodwork Institute, giving architectural and millwork shops a product that aligns with a referenced standard in woodworking specifications and project documents.

Cam Lock Fit For 3/4 Material Thickness

The Olympus DCN1-10B-101 cam lock is specified for 3/4 material thickness, so cabinetmakers can bore and mount it confidently in common panel stock used for doors and drawers. The 1 inch face diameter is designed to cover splintering around the hole, which matters when drilling through veneered panels or finished cabinet fronts. The N Series pin tumbler cylinder uses 4 pin standard stock keying in KD or KA formats, giving shops a predictable stack height and keying pattern for layout. Stock KA numbers such as 101, 103, 107, and 915 define common keyed alike groups, which supports planning different access zones on a project while keeping ordering straightforward.

Where This Olympus Cam Lock Fits In

Cam Lock Applications In Woodwork Projects

This Olympus DCN1 pin tumbler cam lock is part of the Olympus N Series cam lock line, so it fits into cabinet and casework projects that call for N Series keyway hardware. The lock uses 2 reversible cams that work in all positions, which allows it to address different door swing directions and latch points without changing the core lock body. The cam design supports straight or offset engagement depending on hardware layout, which is useful when aligning with strikes or frame edges. The standard function with key removable in locked or unlocked positions supports both service access and day-to-day use in cabinets, file units, or millwork doors. The Woodwork Institute acknowledgment means this lock can align with woodworking specifications where that reference is important to the project scope.

Details That Support Repeatable Lock Installation

The Olympus DCN1-10B-101 cam lock uses a zinc die cast body and zinc die cast pin tumbler cylinder, which provides a consistent manufactured housing for drilling and mounting templates. The lock is rekeyable via cylinder retainer clip, so a technician can reconfigure keying while keeping the same installed footprint in the panel. The 1 inch face covers splintering at the bore, helping finished work present a clean perimeter around the lock without separate trim components. Two reversible cams are designed to work in all positions, which reduces part variation during installation and helps maintain consistent engagement when doors are left-hand, right-hand, or vertical applications. The N Series keyway equivalence to National D4291 4-pin or D4292 5-pin systems gives locksmiths and millwork shops a defined pinning platform for building keyed different, keyed alike, masterkeyed, or grand masterkeyed systems using 4 pin standard stock keying and 5 pin masterkeyed options.

Common Questions About Olympus DCN1 Cam Lock

Select Olympus DCN1-10B-101 For N Series Jobs

The Olympus DCN1-10B-101 pin tumbler cam lock pairs N Series keying with a cam layout built for 3/4 material thickness, so it fits common cabinet construction while matching existing N Series systems. Grade 1 performance testing and Woodwork Institute acknowledgment position this lock for projects referencing those standards. With zinc die cast body, key removable in locked or unlocked position, and 2 reversible cams that work in all positions, it supports straightforward planning across multiple openings. Use the keyed alike 101 configuration when a single key needs to operate several locks in the same area.